How often should the notebook be cleaned and the silicone grease changed?

It usually takes 3 months to half a year to clean up the dust.

Silicone grease is usually replaced in July and August every year, when the temperature is at its highest.

The cycle of cleaning the fan dust. Mainly depends on the environment in which the notebook is used, if the user smokes and uses a lot of dust in the environment, the frequency of cleaning the dust may be relatively frequent.

When the laptop has been working for a while, the temperature near the heat vents rises.

And when you obviously feel that the air outlet is not smooth, you can start cleaning the heat dissipation module.

The first step is to disassemble the cover plate on the D shell, and then remove the fan to clean up the dust accumulated at the air outlet.

to ensure that the heat dissipation of the notebook is working properly. Avoid high temperatures that cause the laptop to work abnormally.

I think you're really looking for cheap and good food.

Notebook cleaning must be a manual fee, even after the sale. The notebook silicone grease will dry, and it is generally 1 and a half to 2 years to change the silicone grease. If the working environment is more mixed, then you basically have to ask for one time in the first half of the year.

If it is a bedroom, it is relatively clean, and it generally has the same cycle as silicone grease.

There is no rule for how long it depends on how often you use it and how you use it.

If you buy a new machine, the heat dissipation is generally in the best state, and after using it for more than half a year, you feel that the temperature of the machine is significantly higher than before, or you hear the sound of the fan, and the air volume of the air outlet on the upper left side is reduced compared with before, and these situations need to be cleaned and replaced with silicone grease, which are carried out simultaneously.

As long as the environment is not too harsh, you can clean the ash once every six months to a year, and it is generally recommended to replace the silicone grease for half a year, but the temperature of your computer is not particularly high in use, and there is no need to change it.

Notebook silicone grease is generally replaced once every 1-2 years.

The main function of the silicone grease of the laptop is to cooperate with the CPU and the heat pipe to complete the heat dissipation function, because the long-term heat dissipation will gradually dry out the silicone grease, and the heat dissipation effect will gradually decline, so it still needs to be replaced. Specifically, look at the environment and purpose of use.

For example, in dusty, windy places, or in large games where CPUs and graphics cards are often used. If the thermal grease is in a state of high-temperature operation for a long time, the silicone grease will become dry and brittle after a long time, affecting the heat dissipation efficiency.

If it is indoors, and the environment is good, and it is not often used, the thermal grease runs less, and it is conservatively estimated that it does not need to be replaced for more than 2 years.

How to change silicone grease for a notebook:

Materials are prepared: screwdrivers, clips, pry plates, brushes, thermal grease, scrapers and other tools and materials.

1. Remove the battery first to prevent the short circuit of the line caused by the disassembly process, and then all the screws on the back are screwed out, and the wires you see are removed and the hard disk is removed.

2. Unscrew the fixing screw of the optical drive head, take out the optical drive head, and screw out the hidden backplane screws underneath. The optical drive has a small round hole, and the optical drive is forced to pop out when you poke it with a wire or needle.

3. Buckle the keyboard, pry it open from the place where there is a buckle on the keyboard, pull out the thread, and then unscrew the screws on the positive plate.

4. Pry open the panel from the gap in the corner, pay attention to the integrated cable inside to be removed and pulled out with the collapse, and then the internal integrated motherboard of the notebook will be displayed in front of you.

5. Suiheng can remove the motherboard by unscrewing the screws on the motherboard, and further remove the fixing screws of the fan copper strip to connect the CPU graphics card, and the entire fan can be taken out to clean up the dust. Mainly clean the fan blades and heat sinks.

6. Replace the thermal grease. Erase the old silicone grease, apply the refreshed silicone grease, and then the fan module is restored and fixed to complete the silicone grease update work, and then the computer is assembled and restored step by step, which is the method of replacing the silicone grease for the notebook.

If you use the computer frequently, you can change it once or so every year or so, and if you don't use it often, you can change it for a longer time.

The main function of the silicone grease of the laptop is to cooperate with the CPU and the heat pipe to complete the heat dissipation function, because the long-term heat dissipation will gradually dry out the silicone grease, and the heat dissipation effect will gradually decline, so it still needs to be replaced, and the specific time can be based on your usage habits.