Redmi K20Pro hangs up after a call, and the flash keeps flashing?

Updated on technology 2024-07-10
7 answers
  1. Anonymous users2024-02-12

    This flash flashing of yours should be a problem with your phone settings! First, there is a possibility that the flash flashes when you set the information that is not read or there is a missed **! Second, it's possible that you have to turn off the camera or accidentally turn it on! You can do an exclusion!

    This flash flashing of yours should be a problem with your phone settings! First, there is a possibility that the flash flashes when you set the information that is not read or there is a missed **! Second, it's possible that you have to turn off the camera or accidentally turn it on! You can do an exclusion!

    This flash flashing of yours should be a problem with your phone settings! First, there is a possibility that the flash flashes when you set the information that is not read or there is a missed **! Second, it's possible that you have to turn off the camera or accidentally turn it on! You can do an exclusion!

    This flash flashing of yours should be a problem with your phone settings! First, there is a possibility that the flash flashes when you set the information that is not read or there is a missed **! Second, it's possible that you have to turn off the camera or accidentally turn it on! You can do an exclusion!

  2. Anonymous users2024-02-11

    When the mobile phone encounters this situation, you first need to turn off and restart it to try, and then will it automatically hang up after the call, or you accidentally press that key to hang up. Check if there is a problem with the flash, or if you set the incoming call flashing to remind you that you have a **access or SMS reminder.

  3. Anonymous users2024-02-10

    The flash keeps flashing after hanging up.

  4. Anonymous users2024-02-09

    The screen of the Redmi phone always flashes and flashes, which means that there is a problem with the phone of the Redmi phone, so it is like this.

  5. Anonymous users2024-02-08

    The Redmi phone screen suddenly flashed, what's going on? I think this situation may be caused by poor contact, and you can take it to a mobile phone store to repair it.

  6. Anonymous users2024-02-07

    Summary. Redmi K20ProWhat is going on when charging flashing and flashingHello dear,This belongs to the normal state,It's because you are in the case of only 10% left,Then overuse the Dao Zeng battery has no residual power,Can't start,When you plug in the charging head,The red light flashes,Song Ming He is in the case of making up the power,Not reaching more than 2%,He won't keep the red light on,It will continue to flash,You can't turn on during this process,Can't start,Wait for 2% of the electricity,After passing, it will automatically become constant, Then you can restart the red light that turns on the normal use of the mobile phone, there is no other problem with flashing, if the red light continues to flash, you can't rush into a battery, you need to check, the charging board and the charging plug are there, the battery problem hopes to help you.

    Redmi K20ProWhat is going on when charging Hello dear,This belongs to a normal state,It's because you are in the case of only 10% left,Then overuse the Dao Zeng battery has no residual power,Can't start thick and high,When you plug in the charging head,The red light flashes,Song Ming He is in the case of replenishment,Not reach2% or more,He won't have a red light all the time,It will continue to flash,You can't turn on during this process,Can't start,Waiting for 2% of the stool to be weak, After passing, it will change from Xun family to always on, and then you can restart the red light that turns on the normal use of the phone, there is no other problem with flashing, if the red light continues to flash, you can't rush into a battery, you need to check, the charging board and the charging plug are there, and the battery problem hopes to help you.

    The phone shows a high temperature. Then I shut it down. I couldn't turn on the next day.

    What's going on.

    The phone shows the sedan or high temperature. Then I shut it down. If you can't turn on the phone the next day, let the phone be powered off for a while, and then confirm whether it is because of the heat that causes the shutdown.

    In general, this situation may be caused by leakage or insufficient power. Leakage may be caused by a short circuit, resulting in heat and inability to turn on. Insufficient power will also cause shutdown, and the battery detection circuit judges that the voltage is too low.

    Hope it helps. If my answer is helpful to you, please give a thumbs up (rate in the bottom left corner), I look forward to your like, your efforts are very important to me, and your support is also the motivation for my progress. Finally, I wish you good health and a good mood!

  7. Anonymous users2024-02-06

    Summary. It's a pleasure to serve you Redmi K20Pro flashes when charging, what's going on, Xiaomi's charging indicator keeps flashing red, which is caused by excessive battery consumption of the mobile phone. It means that the phone is out of battery and will automatically turn off.

    It can be charged with the original charger. Wait patiently, don't pull out the data cable, plug in the charging head and you're ready to go.

    Very high code Eggplant Xing for you Redmi K20Pro flashes when charging, what's going on with the slow picking, Xiaomi's charging indicator keeps flashing red, which is caused by excessive battery consumption of the mobile phone. It means that the phone is out of battery and will automatically turn off. It can be charged with the original charger.

    Wait patiently, don't pull out the data cable, plug in the charging sensitive land head and you can use it.

    Fell and then my phone showed high temperatures. Then I shut it down. I couldn't turn on the next day. What's going on?

    The mobile phone fell and then could not be turned on, and the mobile phone was heated, indicating that the hardware in the mobile phone was damaged, and there was a short circuit in the component and heating. In this case, it is necessary to remove the battery in time to avoid overheating damage, and then go to the nearby mobile phone Weihanchang repair outlets for maintenance.

    But. It didn't shut down when it fell. He is showing high temperatures. I shut it down myself. And then it can't be opened.

    What is the reason for this.

    1. Poor contact between the mobile phone and the battery will cause the mobile phone to shut down automatically. 2. Poor contact between the SIM card and the mobile phone will cause the mobile phone to shut down automatically.

Related questions
12 answers2024-07-10

First check whether the charger is broken, then check whether the data cable is damaged, and then wipe the charging port with alcohol. If you have done all of the above and it still doesn't work, go to the mobile phone repair department to repair it.

14 answers2024-07-10

Huawei Mate 30 series all use large notches and rear 4 cameras, and finally see **, if friends dare to do this, they will definitely be scolded. >>>More

10 answers2024-07-10

The parameters of Redmi K20Pro are as follows:: >>>More

25 answers2024-07-10

Hello landlord, if your screen is green, it is recommended that you take a look at whether your setting options are correct, and whether you have changed the options in the settings recently, causing the screen to change the display mode. If you are sure that it has not been set, and there is no problem with the setting, then go to the after-sales service to test it, it should be a screen problem.

45 answers2024-07-10

Of course, the latter is better.

The larger the memory, the faster the phone will be, there will be no lag, and there will be more things. >>>More