How to solve the problem that sweatpants are too loose?

<>1.First of all, pick up the pants and look at both sides of the waistband, find the movable side, disassemble the movable side at the back, and gently pick the thread with scissors.

2.Tear the waistband into a "1-like opening" and fit through the elastic band.

3.Thread the pin on top of the elastic band, then send the pin and the elastic band into the pants and circle around the pants.

4.Use a white thread and needle to sew the end of the elastic band, measure the appropriate length, cut off the excess elastic with scissors, remove the buttons, and adjust the pants.

5.Finally, the small opening on the outer gray pants is slightly sewn on the outside of the pants with a double white thread, and the thread is tightened, so that it is basically impossible to see that it is modified.

The above is the way to modify the waist size of sweatpants, in addition, when you buy sweatpants, you can buy sweatpants with a drawstring, so that even if the waist circumference is not suitable, you can also adjust it by the method of straps.

1. Cut off the belt in the middle of the back of the pants, and then sew up the range of the pants to be contracted with a traceless sewing technique.

2. After pulling the thread, you can see that the patched piece has no traces, then knotted it, and finally sew the strap of the jeans we cut off before on the patch, and the shrinking of the waist of the pants is completed.

3. The specific operation of the seamless sewing method is to pass through the pants before and after, and then sew them up in the left or right direction, and finally repeat this operation many times, and sew to the top of the pants until the last sewing is done, and pull the thread hard. Sweatpants can be changed to smaller when you buy big, but if your pants are just bought, it is recommended that you can find a merchant to change a pair of sizes that suit you, I generally buy leggings or compression pants when buying a size smaller than the normal size, generally compression pants are worn in a specific environment, and leggings are also very comfortable for daily wear.

Can sweatpants be changed to small if they are bought big?

What to do if you buy sweatpants that are too big.

If the goods you bought are still in the return period, you can change a yard directly. However, if you have a sewing machine at home and use a sewing machine to change it appropriately, if the trousers are too big, as long as you sew a few stitches off the trousers according to your actual size, you can also take it to the tailor shop to let the tailor master help change it and pay a certain fee.

If you feel that the sweatpants are okay, then modify them slightly, and continue to wear them, you can change the pants to a little smaller, and then you can continue to wear them, if they are too big and too loose, then contact customer service to ask for a return and refund, and then pack the pants and send them back to customer service, and then buy a new pair of sweatpants that suit you.

First of all, prepare a short stretch of elastic band, and draw two cuts on the inside of the back of the waistband according to your tightness. Then stuff the elastic band into the middle of the two openings, sew one of the openings and the elastic band with a needle and thread, then straighten the elastic band, pull it to the tightest, and then sew the other end of the elastic band and the other end of the opening with a needle and thread. After the openings and elastic bands on both sides are sewn, it is best to cut the remaining threads and tidy them up, which will be more beautiful and smooth, and it will be more comfortable to wear, so as not to feel that there is something behind them.

It's as simple as that, and the waistband can be freely expanded and contracted according to the change of body shape. Friends should pay attention when opening the mouth, don't open it too much, just about the same width as the elastic band. If you open the opening too wide, it will not only be difficult to sew when sewing, but also ruin the beauty of the pants.

The color of the sewing pants should also try to choose a thread that is close to the color of the pants themselves, otherwise the color of the thread will be obvious, which will destroy the overall beauty. In fact, this kind of sewing has no effect on the shape of the whole pants. If you don't look closely, you can't see that the pants that have been modified.

If you wear a large garment, you will not be able to see it when you cover it. In fact, this method is a little more difficult for some people who have no needlework experience. There's another very lazy and simple way here, and that's to tie the belt.

The belt itself has a mediating effect and can be adjusted according to its own needs. However, sometimes wearing a belt can wrinkle your pants, which can be restless and uncomfortable to wear. If you are in some of the more urgent situations, then the leash is still very useful.

How, do you think the above method is very simple and effective? The subtlety of this method of modifying the waistband is that the waistband can be loose or tight, and can change according to the change of your body shape, so you can wear it all the time without modifying it. This is a more flexible modification method, with an auto-adjustable function, which can be reused.

Hope and thumbs up, thank you! Good mood every day!

1. First find the splicing in the waist, pull the fabric to both sides, cut the exposed thread, and make a slightly larger hole, so that you can see the elastic band.

2. Pull out the elastic band inside, cut off the excess, and then stitch it up and flatten it. The sewing needle is threaded, (as a reminder, if it is a thicker material, you can use a double thread, and a thin material can use a single thread), insert the needle from the bottom inside, and leave the knot inside the opening.

3. Remember that the width of the needle in and out should not be too wide, especially the thin fabric must be thinner, so that the effect of sewing out is similar to the effect of the sewing machine, and you will not see the inside after pulling it open; Sew on one side and sew on the other. The key point is that the insertion of the needle is opposite the exit position of the earlier needle, and try to keep it as wide as possible.

4. Sew up all the openings in this way, tie the knot, and now what you need to do is to insert the needle into the position of the knot, and then put a distance under the fabric, and then thread the needle out of the fabric. The advantage of this is that the excess thread can be buried in the fabric after knotting.

5. Cut off the line, and you can't see that there are traces of passivity here. This method is also suitable for many thread removal areas where it is inconvenient to use a sewing machine, and with threads of similar color, almost no one knows that it was once a broken place.

The sweatpants are too loose, adjust the waistband tight;

There are many ways, for example: you can sew an elastic band in your pants. It is also possible to nail two buttons at both ends of the pants. You can also sew the ends of the pants slightly together. I have personally tested these methods to be effective, and they can often solve the problem of too loose pants.

The best thing to do is to change the waist circumference. Fold the waistband to your right waist, then sew the folded part with a needle and thread. That's it. Either that, tie the elastic band a little tighter.

If the sweatpants are too loose, you can sew them again on the elastic waist to tighten the waist. Sweatpants should not be too tight, because they should not be restricted when exercising, and they are looser, which is very convenient and comfortable for sports. But if it's too loose and can't hang up, you can tighten your waist a little more.

Either tighten the side seam a little, or pin it with a special stitch, or find the seam at the waist and pull out the elastic band inside to cut it off, and then sew it.

You can tie a few pleats at the waist or sew the outside of the leg a little inward.

You can take your sweatpants and change them to make them a little smaller so that they don't look too baggy.

If you can destroy it, go to a local sewing shop, and they will modify it to fit according to your body fat and the degree of hypertrophy of your sportswear.

If the waist of the sweatpants you buy is too large, it is not suitable to expose the waistband of the pants when wearing, just tie a belt, but if you are used to wearing the waistband of the pants outside, you need to modify it, you can go to the nearest sewing shop to find a master to modify.

The sweatpants are too loose. You can follow it inside. Trouser seams. Review it. It's solved.

Hello friend How to solve the problem that the sports pants are too loose, is the waistband too loose, you can go to the tailor shop to tighten the pants, it's okay dear, don't thank me for liking it,

It's good to change to mid pants, just a little under the knee, too wide can be changed to a folded strip edge, but not too narrow, otherwise large movements will be restricted.

Sweatpants should be loose-fitted and if they need to be resized if they are not professionals, to ensure that the cut pants are comfortable to wear and avoid damage to the garment.

Go to the tailor shop and modify it.

Let's go to the tailor shop and change it.

Sweatpants can be changed to smaller when you buy big, but if your pants are just bought, it is recommended that you can find a merchant to change a pair of sizes that suit you, I generally buy leggings or compression pants when buying a size smaller than the normal size, generally compression pants are worn in a specific environment, and leggings are also very comfortable for daily wear.

Can sweatpants be changed to small if they are bought big?

What to do if you buy sweatpants that are too big.

If the goods you bought are still in the return period, you can change a yard directly. However, if you have a sewing machine at home and use a sewing machine to change it appropriately, if the trousers are too big, as long as you sew a few stitches off the trousers according to your actual size, you can also take it to the tailor shop to let the tailor master help change it and pay a certain fee.

If the pants are too tight and want to be looser, you can add a section of elastic to bring in, and then measure the position of one, cut the seam and sleep.

1. You can go to the tailor shop to modify the pants. If the pants are casual pants, you can ask the tailor to release some fabric on both sides of the pants at a cost of about 10 yuan. If the position of the crimping line is very narrow, not enough to let go of some fabric, you can ask the sewing master to remove the thread on both sides of the pants, and then choose a small piece of fabric of the same color or near color on both sides to stitch in a V-shape, so that the effect of expanding the pants will not be great, and the pants will not look out of place.

2. Squat often when you put it on, which can make the pants looser. Check whether the pants are elastic, the more elastic they are, the easier it is to loosen. On the other hand, if the elasticity is relatively small, or even inelastic, the magnitude of loosening will not be very large.

3. When washing the pants and drying clothes, use a larger hanger to stretch the pants and continue to hold them for three days, and the pants will become slightly larger. 1. You can go to the tailor shop to modify the pants. If the pants are casual pants, you can ask the tailor to release some fabric on both sides of the pants at a cost of about 10 yuan.

If the position of the crimping line is very narrow, not enough to let go of some fabric, you can ask the sewing master to remove the thread on both sides of the pants, and then choose a small piece of fabric of the same color or near color on both sides to stitch in a V-shape, so that the effect of expanding the pants will not be great, and the pants will not look out of place.

2. Squat often when you put it on, which can make the pants looser. Check whether the pants are elastic, the more elastic they are, the easier it is to loosen. On the other hand, if the elasticity is relatively small, or even inelastic, the magnitude of loosening will not be very large.

3. When washing the pants and drying clothes, use a larger hanger to stretch the pants and continue to hold them for three days, and the pants will become slightly larger.

There are a lot of tips for pants that are too loose, the first can directly add a belt, this method is more suitable for those state acres to disturb the pants, a little loose, if the degree of pants is too loose, this method is not very suitable, directly add a belt and convenient, but also can quickly solve the problem. Second, you can directly change the waist circumference, take the pants to the tailor shop, and let the tailor master help to transform, because the tailor master's technology is better, so even if the waist circumference is changed to smaller, it will not affect the overall shape of the pants. Third, you can add a strap to buy the kind of clip-on strap, this jacket-style strap has a good pulling effect on the pants, and the pants will not fall off when the pants are loose, and this way of wearing is also more fashionable.

1. If your pants are too loose, the easiest way is to wear a belt, which can tie the waist of the pants, so that you can keep your pants from falling down, and the pants will become more fitting.

2. In addition to being able to tie up the pants, the current belt can also play a decorative role. Using a belt can highlight the position of your waistline, visually elongate your leg proportions, and make your legs look longer and slimmer.

3. Men will tie belts when wearing suits, and the styles of men's belts are relatively similar, and there is no excessive decoration. If you just wear a casual outfit, you can do without a belt, and if you only wear a shirt in the summer and wear it to your waist, it is best to wear a belt.

4. There are many types of belts for women, the materials and styles are very varied, and the styles that can be matched are also diverse. When using the belt, you should pay attention to the style and color of the clothing, if it is a more formal professional dress, choose a simpler waist belt style, not use too bright colors of the style, nor can you use more patterns of style.

5. If you are usually dressed casually, you can choose a belt according to your own matching style, but it is best not to use a light-colored belt when wearing dark clothes.