The beret is going to be worn so that it won t fall off, so how do I need to wear it?

It is fixed with a small clip, and it can be sewn with bangs on the inside, so that the hat will not fall off. It is also a relatively simple and convenient method. However, it should be noted that it is best to choose a plain color for the color of the clip, and the bangs should not be too obvious for stitching.

Generally speaking, the clamp is the best way to fix it, it can be a good way not to deform the hat, and the method of stitching with bangs is still relatively common, but it will destroy the internal structure of the hat, and it can still be used for convenience, but for fear of the deformation of the hat, you can still choose to clamp it directly with the clip, which is also the most effective method.

Buy or knit a beret. Choose a shade that matches the color of your hair or your clothes and pants. Opt for a beret with a tight brim that will make it even better on top of your head. Think about whether you want a thin lace-trimmed beret for autumn and spring, or a thick beret for winter.

Condition your hair. Depending on what you're looking for, you can wear a beret with any head shape. If you're picking a bud, be sure to tie it high enough to fit in a beret or low enough to sit under the brim.

You can also tie a low side ponytail or 2 short braids on either side of your skull. Wearing a hat loosely with a little big roll was the most dynamic outfit of the 1940s.

Experiment with different design styles. You can expose your bun line without revealing it. You can put your hair in front of your ears or behind your ears.

Find the design style that works best for you. Keep in mind that berets are traditionally worn diagonally. Have a good time!

Here are some practical design styles for you to try out:

Tuck the brim of your beret a little, tilt it to the side, and wear it a little lower on your forehead. It would be better to add a short side bud or braid to the side that is not skewed.

You don't have to tuck the brim of your hat, but put a little hair into your hat to produce the actual effect of making fungi. Put the beret on top of your head and pull it up and down your ears and tilt it to the side if you like. This style will work well with long, straight or curly hair that is voluminous.

Use a silk scarf or cotton, wool fleece to padding the front side of the beret. Wear the hat on top of your head so that the hair in front of you is exposed. Use a loose bud to hold the hair at the back of the house, or tuck other hair into a hat.

Doing a finger wavy curl or bangs curl will elevate a touch of retro chic aura.

Add decorative designs to berets. If the beret looks too tacky, or if your attire needs some decoration, add a corsage, clip or headdress to the hat. Bold earrings are another option. Pick the one that works best for you.

Clip the beret to your hair. Use the band to hold the beret in place on both sides of your hair. Once the beret slips off, it can destroy your head shape and dress up with all your heart.

You can fasten it with a button, tie the beret to your hair and it won't fall off.

A beret should be pinned to your hair with some black pins when wearing it so that it doesn't fall out.

You need to wear a beret crookedly so that it looks the best, and you also need to wear some retro-style clothes.

You can make a clip in the back so that it doesn't fall off. No matter what kind of exercise you do, you won't drop it.

1. First of all, you need to choose the right size. When choosing a beret, it is best to choose a hat that suits the size of your head, otherwise it will easily fall off.

2. You can find some ribbons with a similar color to the beret, sew them on both sides of the beret, and then tie a bow, which is both beautiful and will not fall off.

3. Arrange the angle when wearing it. Pay attention to the angle of wearing, adjust the appropriate angle and size, and then it will not be easy to fall.

4. Assist with hairpins. You can buy that kind of hairpin and clip the beret with your hair so it doesn't fall out.

When wearing a beret, you can use a hairpin to attach the beret to your hair so that it doesn't fall out.

When wearing a beret, you can use a hairpin to clip the hat and hair together so that the hat does not fall off.

1. The most primitive way of wearing, military style wearing. Berets are often used as a symbol for the personnel of the Einsatzgruppen, special forces and airborne forces of some countries' armies, and countries mainly distinguish different arms in color.

2. The body of the hat covers the brim, and it is worn in French style. The styles of civilian berets can be described as ever-changing.

3. The hat is worn after the hairline, and the spray head is worn. The beret is a beanie, so its shape is all reflected in the cap body, the hat body can be lengthened, widened, and can be designed to be as wide as the top and bottom, the brim is also a part of the beret design, and the width of the brim can be determined according to the needs of the design.

4. Wear the beret diagonally a little, diagonally.

First, wear the hat with a rope and hang it on your chin, so imagine the hat you wear on the construction site. Although this method will not bring a hat, it will make your image unsightly, and it is obviously a tide sister who has become dirty.

The second method is to fix it with a small clip, which is not impossible. The downside is that if you wear a light-colored hat, the small clip will be very conspicuous.

The third is also a way to feel better. It is to sew the bangs on the inner lining of the beret, and pay attention to the bangs on the hair when wearing the hat. If one bangs doesn't hold the hat in place, then two.

Then remind everyone that when sewing bangs, just sew the inner lining, and don't pierce the outside.

It's beret-of-beret season again, so let's collect it.

Berets, you are still bothered about not being able to wear berets, teach you how to wear berets correctly.

The hottest hat this winter - the beret, but it makes the sisters who can't wear it love and hate, after all, if they are not careful, they will wear it as a New Oriental graduate. So today I'm going to teach you how to wear a beret.

There are two ways to wear a beret: those with bangs and those without bangs.

If you think it's practical, welcome to follow!

Because it is too soft, it is not fixed, or it is very large, and it is easy to fall off. Generally knitted wool. The beret made of a soft material like the wool material is uncontrollable, and if you don't need a clip, it's easy to wear and feel like it's going to fall off.

Therefore, in the case of buying a beret, the merchant will give the beret a clip, and the beret will not fall off when it is clipped.

1.Pick the right size. When choosing a beret, it is best to choose a sunhat that is suitable for the size of your head, otherwise it will be very easy to fall off.

2.You can find some ribbons that are the same color as the berets, sew them on the sides of the berets, and then tie a ribbon bow that looks good and doesn't fall off.

3.In the case of wearing, comb the viewing angle. Pay attention to the angle of view of wearing, adjust the appropriate direction and size, and then it is not easy to fall off.

4.Assist with headbands. You can buy that kind of headband, and you can clip the beret with your hair, so that it won't fall off easily.

5.Bangs stickers. Buy a piece of bangs and then attach the bangs to the inside of the beret and sew it well, so that you can put more than one sticker, so that it is not easy to fall off.

6.In the case of buying a beret, the merchant will give the beret a clip, and the beret will not fall off if it is clipped.

Being able to hold some of the fixes on the inside of the beret will also ensure that we will collapse when we put on the beret. Secondly, after cleaning the beret, you can also put a little net weight object in the bottom of the visor and dry it overnight.

If the beret does not have an elastic rope, it must be sewn with a needle and thread of a similar color, and if there is an elastic rope, the color of the thread is not prescribed, but special care must be taken not to sew it to the outside.

I think it's very useful to use a hairpin to clip it when wearing a beret so that it doesn't fall off.

When you wear it, you should use some small clips to get stuck in the back, so that no matter how you move, the hat will not fall off.

When wearing a beret, you can use a black clip to clip the hat from your hair, so that the hat will not fall off even if the wind blows.

I think that in order to wear a beret correctly, you should first comb your hair smoothly, and then put on a beret and put on a small clip, and I don't think it will fall off.

You can use a regular hairpin to attach a square hairpin to a beret, and then use a square hairpin to clamp your hair, and the beret will not fall off, here are the specific steps:

Tools required: regular hairpins, square hairpins, berets.

1. First of all, prepare a square hairpin.

2. Then cling tightly to the side of the beret.

3. Use an ordinary hairpin to stick the square hairpin on the side of the beret.

4. Finally, put on a beret and use a square hairpin to stick it to your hair as usual.

5. So that the beret is ready.

6. After testing, it can be seen that no matter how you exercise, the beret will not fall off, and it is fixed very firmly.

Notes:1. It is best to fix the beret with the newly bought hairpin, the newly bought hairpin has better elasticity and better fixing effect.

2. Two hairpins can be fixed according to this method, which is more firm.