-
1.Use a hair dryer to heat the part of the shoe against the top of your foot and put it on while it is still warm. For a certain part of the foot, such as the back heel, the side of the toe, there will be a blister
You can use a hair dryer to blow on the part of the shoe where you rub your feet until the skin becomes soft, and then smash it with a hard object.
2.Application: Apply cream to the grinding place of the new leather shoes, or dry a piece of wet paper towel, then fully soak the liquor, fix it on the grinding place with a clip, and leave it overnight to soften the skin.
3.Rolling method: If the edge of the shoe is rubbed on the foot, you can cover it with a wet towel for a few minutes to make it damp and soft, and then take a cylindrical object such as a glass bottle and roll it several times.
4.Wedge palm method: If the new shoes are too small and the feet are clamped, you may wish to cover them with a wet towel, and then use the shoe wedges to prop them up, and they will be smooth to wear.
5.You can put a band-aid on the back of your foot, which will reduce the direct friction of the shoe against **.
-
Answers, finishing.
1.With a hair dryer.
Shoes. Stick to the top of the foot.
The part is heated, while it is served.
Temperature. Wait to wear.
Yu. Place. Grinding feet. Compare.
Heel. Toe.
Side. Grind the blisters.
Species: with a hair dryer.
Rub your feet according to your shoes.
Part blowing. Straight. Blow. Skin.
Soften. Then smash it with a hard object.
2.Daub. Apply cream to the feet of the new leather shoes.
Or. Dry with a wet paper towel.
Recharge. Soak in liquor. Use. Clip.
Fixed. Grinding feet. Put. Late.
I can get up. Softens the skin.
Function. 3.Rolling.
Shoes. Grinding the foot at the edges.
Cover a few with a damp towel.
Bell. Make it moist and soft.
Take the glass bottle. Wait for the cylindrical object to be rolled out vigorously several times.
4.Wedge palms. New shoes. Too. Clamp feet.
Cover with a damp towel.
Then use the shoe wedge to prop up.
Wear it up. Smooth the foot.
Foot. Stick. Block Creation. I attach it and reduce shoes.
**。Direct friction.
-
1. Find a clean rag and soak it with water, not all of it, just a little wet.
2. You need to fold the damp rag into a small piece and stuff it into the toe of the shoe.
3. Wait for a night's time, then remove the rag.
4. The other shoe also needs to be placed overnight in the same way.
5. Put on your shoes and you will find that your shoes are no longer pinched.
Other methods: 1. Wear more and become loose.
If the shoes are small, you can take them out and wear them more when you are fine at home, and take them off and rest when you are tired.
2. Shoe support expands.
You can go to the mall to buy shoe supports and expand them according to your needs.
3. Semi-wet newspaper stuffed in shoes.
You can find some discarded newspapers as much as possible, and then make them semi-wet and not fully wet, wrap the wet newspaper in the dry newspaper and stuff it into the shoes, and when the water dries, it will swell, and you can stretch the shoes.
-
1. Wear more and loosen.
The shoes are small, you can take them out when you have nothing to do at home, and take them off and rest when you are tired, so that you can loosen them after wearing them a few more times.
2. Shoe support expands.
You can go to the mall to buy shoe supports, expand them according to your needs, and the shoes will become loose after a long time.
3. Semi-wet newspaper stuffed in shoes.
You can find some discarded newspapers as much as possible, and then make them semi-wet and not fully wet, wrap the wet newspaper in the dry newspaper and stuff it into the shoes, and when the water dries, it will swell, and you can stretch the shoes up.
4. Apply soap.
If you want to wear it directly out of the house, then you can apply soap to the place where the shoe rubs your feet to eliminate friction, and it will not hurt so much to wear, and it will grow after wearing it for a long time.
5. Hot air blowing on hair dryer.
You can also use the hot air of a hair dryer to blow the inner layer of the shoes, but not too hot, it will ruin the quality of the shoes. Then wear it again, so that the texture of the shoes becomes soft and it will not hurt so much to wear, and it will grow after wearing it for a long time.
1. Find a clean rag and soak it with water, not all of it, just a little wet. >>>More
The following two practical and effective methods are recommended to prevent foot pinching and foot grinding. >>>More
Solution: 1. Cover the part of the shoes with a wet towel for a few minutes, and then take a dry soft towel to wrap the place where the feet are squeezed, tap a few times with a small hammer, and try to smooth the place where the shoes rub the feet, so that the shoes will not grind the feet after the leather becomes soft and flat. >>>More
You can use a wet sponge to wet the leather of the grinding part of the foot, and leave it for an hour to soften, so that it will not be so uncomfortable to wear again. But don't wet your shoes too often, as this is not conducive to protecting your shoes. You can also use liquor to rub your feet in your shoes, soak them for about 5 15 minutes, wait for them to be slightly soft, and then put them on and walk, and then don't grind your feet after drying.
Tell you how to solve foot odor.
People who will sweat their feet must remember to buy cotton socks, all cotton, all cotton is that you don't have a good elasticity in your hand, it doesn't look shiny, a little astringent, only cotton has such a texture,. >>>More