-
After many friends buy furniture and go home, they often cause damage to the surface of the furniture for various reasons. Sometimes it's a scratch from a knife, sometimes it's a small hole caused by a bump, which makes the furniture look unsightly. So, how do you repair these damages?
Preparation materials: 600 mesh sandpaper, 502 glue, wood wax oil trial pack or water-based wood paint (topcoat) trial pack, scraper, repair putty.
First of all, let's distinguish between furniture materials. If it is pure solid wood furniture, then for small scratches on the furniture, you can go to the hardware store to buy fine sandpaper, more than 600 mesh, carefully polish the scratched places, and polish until the scratches are not visible, and then, if the surface is originally brushed with wood wax oil, then go to ** buy a trial pack of wood wax oil, or use olive oil at home to wipe the wood wax oil or olive oil with a clean cotton cloth in the polished place. If the surface is brushed wood paint, then go to **buy a trial of water-based wood paint (topcoat) and brush it with a brush.
If the dent is larger, then you need to buy furniture repair putty, the texture of this thing, feel like plasticine, fill it in the pit, but be careful not to fill it too full, leave a shallow layer. After waiting for the putty powder to dry, use 600 mesh fine sandpaper to polish the pit around, pay attention to the powder, try to fill in the pit just left. After the wood powder to be sanded fills the pits and raises slightly, a few drops of 502 glue are dropped on the wood powder.
When the 502 glue is dry, use sandpaper to smooth out the pits (which should have been raised by now). After that, apply wood wax oil or varnish.
If your furniture is made of artificial materials, particle board, etc., then go directly to **buy furniture putty, wipe it on the surface of the furniture, scrape it flat with a scraper, wait for it to dry, polish it with 600 mesh sandpaper, and then buy a color paint of the same color and paint it again. Color paint and the like, ** are sold in trial packs, a small bottle, free of charge.
-
Personally, I think you can find a professional to fix it, and it will be done in half an hour.
-
Looking for a manufacturer to spend money to repair, it is guaranteed to be fast and good, but the better the furniture, the more expensive.
Specific steps for a perfect fix:
1. The first step: use a knife to remove the debris in the corner of the solid wood furniture, which is sure to be smooth and free of wood thorns;
2. Step 2: Fill the affirmation with appropriate filling material. It is recommended to use professional filling mud, which can be bought in large supermarkets;
3. Step 3: Fill the filling material to the wound and shape the wound to make it coordinate with the corner lines of the dining table. After the filling, the filling material should be slightly higher than the original surface of the furniture;
4. Step 4: Then use fine sandpaper sand to smooth the filling. It is recommended to use sandpaper No. 2000;
5. Step 5: Use a color correction pen to make the background color of the solid wood furniture filling;
6. Step 6: Use a coloring pen to make a complexion;
7. Step 7: Draw a fine and realistic wood grain;
Step 8: Spray the primer, and then make further adjustments to the color of the filler;
Step 9: Spray the appropriate brightness topcoat and the repair is complete.
-
If the corners of the solid wood furniture are abrasions and the painted wood is not touched, you can use crayons or paints of the same color as the furniture to cover the exposed base color on the wound surface of the furniture, and then apply a layer of transparent nail polish.
If the corners of solid wood furniture are bumped with white burns, they can be wiped with a cloth stained with alcohol, toilet water, kerosene or strong tea, or a cloth with a mixture of soot and lemon juice or salad oil, wiped dry and waxed.
If the cracks at the corners of the solid wood furniture are small, you can directly fill the cracks with saw foam powder, and the color of the sawdust powder can be adjusted according to the color of the solid wood furniture, so that the solid wood furniture is more convenient to repair and the effect is obvious. If the crack is larger, you can use a knife to split it into several parts on both sides of the crack, the smaller the better, so that the original large crack will become smaller, and finally the big crack and the small crack are basically the same, and then fill in the saw foam powder, so that the repaired solid wood furniture is more beautiful and natural.
-
First of all, if the furniture is accidentally scratched, but does not touch the wood below the paint film, you can use a soft cloth dipped in a little melted wax to apply the paint film wound to cover the scars. Allow the wax to harden before applying. This is repeated several times to cover up the film scars.
Then, there are two ways to repair cracks and holes in the table, chair and cabinet surface: one is to cut the old books and newspapers into pieces, add an appropriate amount of alum, boil it with water into a paste, embed it in the cracks, and dry it very firmly; The second is to mix sawdust with white glue to adjust evenly, embed cracks, and polish with sandpaper after a day and night, which is simple and economical.
If the hinge is loose, you can take the wood as thin as chopsticks, sharpen the tip and coat it with white glue plug in the hole of the wooden screw, break the wooden strip after hammering, and then screw the wooden screw back in, you can tighten it.
Then, the surface of the furniture paint: it will change color over time, you can use a rag dipped in toothpaste to try, be careful not to use too much force, you can also stir the two egg yolks evenly, apply it to the yellowed place with a soft brush, and carefully wipe it clean with a soft cloth after drying.
Please click Enter a description.
Then, the heat resistance of heat-proof solid wood furniture is generally poor, too close to the heat source, it is easy to make the wood lose water, local cracking, deformation and other conditions. Therefore, solid wood furniture should be avoided from direct sunlight when used, and at the same time try to stay away from heat sources, at least about one meter.
Then, the moisturizing solid wood contains water, and the hardwood furniture shrinks when the air humidity is too low and expands when it is too high. Therefore, the indoor humidity of solid wood furniture must be slightly higher than its own moisture content, so consumers should understand the moisture content parameters of solid wood furniture when buying furniture, and refer to the humidity of the use environment marked on the manual.
Finally, dusting is recommended every two or three days) because dust rubs against the surface of solid wood furniture every day. Solid wood furniture generally needs to be waxed and maintained, under normal circumstances, only once a quarter can be waxed, so that the furniture looks shiny and the surface will not be vacuumed, and it is easier to clean. Moreover, it can lock the moisture in the wood and effectively prevent the furniture from drying out and deforming.
-
"First, regularly clean the furniture, do not clean it directly with water, and regularly apply a layer of wax to the furniture, which can not only increase the brightness and beauty of the furniture, but also have a protective effect on the furniture. There are two ways to repair cracks and holes on the surface of tables, chairs and countertops: 1. Cut old books and newspapers into pieces, add an appropriate amount of alum, boil them with water into a paste, embed them in the cracks, and dry them very firmly.
2. It is mixed with white glue and sawdust to adjust evenly, embedded in cracks, and polished with sandpaper after a day and night, which is simple and economical. If the hinge is loose, you can take the wood as thin as chopsticks, sharpen the tip and coat it with white glue plug in the hole of the wooden screw, break the wooden strip after hammering, and then screw the wooden screw back in, you can tighten it. "I hope my answer will help you!
-
It is normal for solid wood furniture to be damaged after long-term use or improper use. As long as the appropriate treatment is made, it will not affect the appearance. But how to deal with it? Here are a few practical tips to help you fix it quickly.
1. Scald treatment.
When solid wood furniture is accidentally prevented from being very hot, it is easy to leave burn marks. At this time, a dry, ultra-fine steel wool pad for furniture coating can be used to wipe the scalding mark directly along the direction of the wood grain; You can also use salad oil or mayonnaise to apply to the burn marks, take a soft cloth and gently wipe it along the wood grain, and then change to a clean soft cloth to wipe it clean, and finally polish it.
2. Scratch treatment.
If the paint surface of the furniture is abrasion and does not touch the wood under the paint, you can use crayons or paints of the same color as the furniture to apply to the wound surface of the furniture to cover the exposed undertone, and then apply a thin layer of transparent nail polish.
3. Water mark treatment.
If the furniture is not wiped off in time after being dripped, it will leave water traces after drying, and you can use a slightly thicker damp cloth to cover the water traces, and gently press it with a heated electric iron to eliminate the traces of water.
Fourth, mildew treatment.
If you encounter moldy solid wood furniture, you can first use a clean soft cloth dipped in a neutral detergent or a special furniture cleaner to remove it. Then lightly apply a layer of furniture wax or essential oils to the musty area, and place a bar of soap or a gauze bag filled with sun-dried tea residue in the musty area to help eliminate the musty smell.
5. Burn treatment.
If the paint is burned, you can wrap a layer of fine-grained hard cloth on the matchstick or toothpick, gently wipe the marks, and then apply a thin layer of wax to fade the burn marks.
Mastering the above five kinds of solid wood furniture repair methods can basically solve more than half of the furniture maintenance problems, of course, there are some large-scale damage, in this case, it is best to choose a professional after-sales maintenance personnel to install, so that the effect is more guaranteed.
-
The types of furniture in the market are very large, such as metal, glass, etc., but most families tend to buy furniture with solid wood furniture because it is environmentally friendly. However, solid wood furniture is relatively narrow, so daily cleaning and maintenance are more important. Then, the next one introduces the cleaning method of solid wood furniture.
Solid wood furniture damage is too distressing, teach you a few words, let it always be new white furniture yellowing white paint on the surface of the furniture, will be yellow for a long time. It can be wiped with rag teeth, pay attention to it, not too strong; You can mix two egg yolks, apply a soft brush to the yellow, dry clean and dry, and then use a soft cloth. Also take care to avoid the use of long-term direct furniture.
Removing the oil residue from solid wood furniture is an excellent detergent, wipe it down, then spray a small amount of corn flour to wipe it off, and finally remove the corn flour. Corn flour can absorb all boots adsorbed on the surface of furniture, making the paint surface smooth. With the ink on solid wood furniture two white vinegar can be added to one water, wipe the ink ink furniture with a sponge, then clean it and dry it.
Paint Film Burning Repair Methods If the furniture film is burned by a smoke target, the soot or does not reach the focus label, and the trees below the paint film can be used with a small piece of thin wire and gently wiped to burn. The traces are then applied with a thin wax solution that can remove the coke. Watermark furniture due to the water will not be erased in time, after a period of time, the water involves the paint film voids and accumulates the paint film, in this case, as long as the water trail is covered with a clean rag, it will be dry and carefully wiped with a soft cloth, and more importantly, it is important to pay attention to the sun is avoiding the use of direct furniture.
**Furniture ScratchesIf the furniture is accidentally scratched but does not touch the woods underneath the paint film, dissolve the wax with a soft cloth and apply it to the paint film damage, covering the scar. After the wax is very hard, apply a layer. It can be covered several times in a repetition, i.e. it can be covered with film.
Cracking problem: Use 502 glue to fall along the crack, then the blade gently scrapes off the excess glue, shake the colored paint, and then first use the brush pointer to a little color in the prepared paper. Color until there is only a little bit of color on the pointer of the brush, then color the target position (be very careful when manipulating so as not to blame the painted surface of the furniture).
Burn problem: Furniture paint burns, you can burn a layer of fine lining hard cloth on a match or toothpick, gently wipe the marks, and finally apply a thin wax, which can secretly scorch the focus. You can use color drawn oil or mayonnaise in ironing, then use a soft cloth to wipe the wood, then change a clean soft cloth to wipe clean, and finally give solid wood furniture.
Yes. Scratch problem: When there is the wood quality of the paint, the paint film can be damaged with a small wax solution to cover the scar; After the wax liquid is very hard, a layer is applied so repeated scars can be covered multiple times.
Ink problem: Add white vinegar at 1:2, then wipe the ink with water, finally clean it and dry.
Water Title Problem: Use a damp cloth to cover the traces, then carefully press the pressure damp cloth with an electric iron, the traces can be dull.
-
In this case, the best way to repair it is to use some spray paint to repair, the effect is very good, and you should pay attention to its color when spraying, and you can coordinate it.
-
Personally, it's not easy to fix it, but we can buy a tablecloth to cover it up. If it is only a small indentation, you can use a multi-layered towel to warm it with boiling water, repeat it many times, and it will have an effect. If a piece of furniture is directly missing, and now there are workers who come to repair the furniture, you can ask them to help you take a look.
-
You can go to some more professional carpenters to repair, now there are many people doing this kind of furniture repair industry, ** aspect is not very expensive, and the repair effect is also very good.
-
If the paint surface is damaged, it can be wiped off with a rag and applied with a thin layer of wax. If a crack appears, you can burn the old cotton cloth into ashes, mix it with ketogenic oil into a paste, and put it in the crack.
After the use of office furniture for a period of time, there will be some dirt on the surface, some dirt is very difficult to clean, at this time we should use some furniture cleaning agent to clean, in addition to introducing several cleaning methods for office furniture: >>>More
1 Try anhydrous alcohol first, by using a soft fabric dipped in alcohol, rubbing back and forth in a dark place, generally it should be able to remove. Alcohol does not harm the paint, and it is also more environmentally friendly and hygienic, so it should be the first choice. 2 Use kitchen cleaner, stained on the soft fabric to wipe the stain lightly, as fast as possible, the time is shorter, some cleaning agents are more alkaline, and the paint has a certain corrosiveness, so it is necessary to complete the wipe as soon as possible before the paint softens, and wipe it with a damp cloth several times after wiping to remove the residual cleaning agent. >>>More
Elm furniture is durable, varnish, and hand-painted, with the characteristics of environmental protection and no pollution. It is also not good to give off any unpleasant smell . Disadvantages: The old ones are easy to deform, grow insects, and even crack and old tenon eyes It is easy to crack and deform The density of elm furniture is low, and the range of dry shrinkage and wet expansion is relatively large. >>>More
If it is on a hidden pipe, then it is necessary to observe the floor, the walls, sometimes to see if there is any damp and seepage on the top of the floor, and sometimes to disassemble the decoration.
The store manager treasure applet can provide exclusive sales words and ppt for sales, including providing materials and materials needed for publicity. Merchants can replace their own company's information and logo to conduct business, so that merchants can better promote their own mini programs and better provide them to merchants. **Quotient charges once, and the benefits are quite large. >>>More