How do you wash off furniture self spraying? How to paint furniture yourself

Self-spraying paint can be removed with olive oil, if you have olive oil at home, you can gently apply some areas with paint on your hands at this time, and then wash it with soap after a few minutes, the effect is also very good.

If you can't find olive oil, you can apply the toilet water to the area where there is paint and wash it with soap after a while. Without olive oil, peanut oil and salad oil are similar.

Banana oil is also a good choice, if the smell is relatively strong, you can use banana oil to apply it to the area stained with paint to wash it, and there will be no odor with banana oil. Or go straight to the paint shop and buy some turpentine to clean.

If the paint is more seriously contaminated, you can choose to clean it with gasoline at this time, dip some of it in the place where there is paint with gasoline, and then clean it with soapy water, the effect is also very good.

If the paint pollution is more serious, you can use gasoline to clean it at this time, apply some gasoline to the place of paint, and then clean it with soap, the effect is still very good.

1. Dissolution of the steps to remove the paint from the furniture.

Shellac varnish on furniture can be removed with industrial alcohol, natural lacquer can be removed with natural paint thinner, and shellac varnish and natural lacquer mixed paint can be removed with a mixed solvent of industrial alcohol and natural lacquer thinner. Therefore, it is not necessary to use chemical compounds to remove these paints from furniture.

How to remove paint from furniture.

2. Brush the steps to remove the paint from the furniture.

Use an old brush or a disposable brush to apply the appropriate solvent to an area of the furniture surface. Leave the alcohol or thinner on for 5 to 10 seconds, then wipe clean with a coarse cloth or Scine. It is important to note that every time you wash a small area, you should change the rag frequently to avoid the old paint being rubbed on the furniture again.

3. Scrape the steps to remove the paint from the furniture.

Once the paint has been wiped off, the entire furniture is run through with a spatula to remove any remaining paint. Use a scraper or a scoop soaked in thinner to scrape along the lines of the furniture, and if necessary, grease the furniture, but do not use force.

Steps to remove paint from furniture.

The above is how to remove paint from furniture shared by Qipao.com, I hope it will help you. If you want to know more about furniture, please continue to pay attention to Qipao.com. 10 seconds to get the ** can also get four sets of design plans for free, and there is a decoration housekeeper to track the whole process, hurry up!

If you have gasoline, you can wipe it off with some gasoline, and the gasoline can volatilize and decompose and dilute the paint.

1. Olive oil, apply some on the self-spraying position, gently rub a few times to soak thoroughly, and wash with soap after a few minutes. 2. Peanut oil or salad oil, rub the peanut oil or salad oil on the position of the paint, add some dish soap, rub it, and wipe it with a rag.

The specific process steps of home painting are as follows:

Step 1: Remove the handles and other decorations.

Removing handles and other trim from furniture to prevent scratches on your hands when spraying paint also helps with paint uniformity.

Step 2: Polish.

Use putty to level up, after grinding, see if the furniture has uneven places, use putty to level, polish again to a flat state, and dip a cloth with water to make it semi-wet. Wipe the powder on the furniture just after sanding, take a fine sandpaper and re-polish it, pay attention to the corners, and then clean up the powder with a water-soaked cloth.

Step 3: Paint the paint.

Take the paint, brush, and open the paint cover. Dip the brush in the paint bucket, not too much paint at a time, just a moderate amount. The rules for painting are from top to bottom, from left to right. Pay attention to the corners and hidden places should also be painted, so as to keep it even.

Step 4: Allow to dry.

After the furniture has been painted, let it sit in the room for three to five hours and wait for the paint to dry.

Step 5: Re-polish.

Once the paint is dry, sandpaper the furniture from start to finish. The purpose of this polishing is to smooth out areas of uneven paint so that the paint can continue to be painted later.

Step 6: Paint the second time.

Follow the third step above and spray paint a second time. Note that if the paint is too thick, you can add the right amount of rubber water, dilute the paint, and paint it again. After that, it continues to dry and sand.

Step 7: Paint the third time.

Follow the steps above to paint again, so that the furniture is finished.

Step 8: Install the handles and other decorations.

Finally, the first ornament was reassembled. In this way, the whole furniture is painted.

1. Regular care: Painted furniture is a little different from other furniture in production, and everyone needs to be more careful in use and maintenance. The surface of the painted furniture is relatively weak, if it is not regularly cared for, then with the passage of time, the film on the surface of the painted furniture will quickly age, lose its light and be brittle, so that the furniture on the surface of the painted furniture will encounter the color difference.

2. Avoid exposure to the sun: and spray-painted furniture should not be exposed to the sun, or heavy rain, which will accelerate the paint peeling off on the surface of the painted furniture for a long time.

3. Pay attention to the placement: pay attention to the placement of painted furniture, and do not place it in a relatively humid place, which will lead to accelerated decay of wooden furniture and rust of metal furniture. The contact parts of painted furniture should also pay attention to water immersion, otherwise it will lead to changes in the structure of the furniture, resulting in a shortening of its service life.

4. Prevent the temperature from being too high: because the surface of the painted furniture is a thin film, when the high-temperature thing is placed on the surface of the painted furniture, a layer of heat-insulating things can be placed at the bottom of the high-temperature object to prevent the temperature from being too high and damaging the surface of the painted furniture.

There are also a lot of furniture materials, paint-free board furniture is also one of them, it belongs to the particularly clean and beautiful furniture, but it is also very important to clean the furniture during maintenance, and the correct cleaning is also very important for our home. So,How to clean paint-free furniture? It's also important when we're at home.

Below we will introduce to you the knowledge about paint-free furniture.

1. How to clean paint-free furniture.

1. In a dry environment, furniture should be placed in a dry room to avoid contact with acidic liquids and prevent wardrobe corrosion. Putting a dehumidifier stick or desiccant in the closet effectively prevents the closet from deforming due to moisture and mold.

2. Daily cleaningKeep the surface of the wardrobe clean and clean, regularly clean the surface and interior of the wardrobe, and use professional wooden furniture cleaners to effectively remove pollutants on the surface of the wardrobe.

3. Maintenance and waxing, in the case of E0 ecological board closet, the maintenance of wax treatment is effective. Before waxing, keep the surface of your wardrobe clean, use professional furniture glaze wax, and wait for the natural air to dry before putting on your clothes.

2. What are the advantages of paint-free furniture?

1. Paint-free furniture. Wooden decorative paper is laid on the floor, and paint is attached to the furniture. This kind of furniture has a variety of colors, clear texture, strong decoration and low production cost.

Due to the limitations of the material itself, they are not wear-resistant and flame-retardant, have a long service life, and are prone to cracking, discoloration and aging.

2. The furniture does not contain PVC paint. Plastic decorative films and adhesives are attached to the surface of the board to simplify the furniture production process, clear color textures, slightly more expensive than paint paper, and a wide selection of colors and patterns. However, it has poor abrasion resistance and flame retardancy, and is prone to cracks, discoloration, and aging.

3. Fireproof board paint-free furniture. Thin laminates are made by high-temperature and high-pressure machines and are commonly used for door panels. Especially good strength, abrasion resistance, flame retardant, UV resistance, yellowing resistance, aging, cleaning kitchen, toilet and other stains and stains easily, rational use of environmentally friendly materials, and use a variety of detergents.

Surf. There is no damage to the use of brushes or iron documents. Due to the peculiarities of the material, the types of doors are limited, and the choice of doors is small.

4. The advantages of unpainted furniture. The most common use of the home does not have a high adventurium viscous coating melamine veneer is free formaldehyde, home waterproof, moisture-proof protection on the basis of particleboard protection. Dust-free furniture is easy to use and directly packaged to save time, time, cleaning, wear-resistant, moisture-proof, dust-generated, low production cost, paint cost and cost reduction, furniture without paint and furniture is toxic, which is friendly.

5. As a new type of furniture, unpainted furniture has higher technical requirements and longer service life than solid wood furniture, usually 10 years. Painted furniture, especially sunscreen, has a strong fade resistance to large brand lacquerware, but it should not be overlooked.

The cleaning of paint-free furniture also requires the right method, so as to avoid damage to the furniture.

In daily life, housewives often have to clean and maintain their furniture to keep them shiny. But you may not know that some wrong cleaning and maintenance methods, although the temporary chain can make the furniture clean, but in fact, it has caused potential damage to the furniture, slowly making the furniture deteriorate. Let's take a look at itHow to clean paint-free furniture? and the purchase skills of paint-free boards.

1. How to clean paint-free furniture.

1. First of all, when cleaning and maintaining the furniture, you must first determine whether the rag used is clean. When cleaning or dusting off, be sure to turn it over or replace it with a clean rag before using it. Don't be lazy and reuse the soiled side over and over again, as this will only cause dirt to rub against the surface of the furniture repeatedly, which in turn will damage the glossy surface of the furniture.

2. If you want to maintain the original brightness of furniture, there are currently two kinds of furniture care products: furniture care wax spraying and cleaning and maintenance agent. The former is mainly aimed at furniture made of various wood, polyester, paint, fireproof rubber board and other materials, and has two different fresh scents of jasmine and lemon. The latter is suitable for furniture made of wood, glass, synthetic wood or melamine, and is particularly suitable for furniture made of mixed materials.

Therefore, if you can use skin care products that are both clean and caring, you can save a lot of valuable time.

Second, the purchase skills of paint-free boards.

1. Carbonization point: Observe the paint-free board at an angle of 45 degrees under better light, if you see a small piece of unclean on the smooth board, it belongs to the carbonization phenomenon generated in the production process, commonly known as brushing. The carbonization point is that the paint-free board is large in the production process, and there are serious problems on the board surface, which is also an insurmountable technical problem for domestic paint-free board manufacturers, and the carbonization of the surface of the same kind of paint-free board on the market is more than 30%.

The carbonized surface seriously affects the service life and decorative effect of the paint-free board.

2. The paint-free board with the core laminated with MDF and melamine finish is not environmentally friendly, cannot hold the nail repeatedly, and the internal stress is unbalanced, resulting in very easy deformation. 3. The paint-free board market with the plywood laminating the core substrate is generally easy to open the glue. Although the paint-free board with the core and the middle plate and the melamine finish is highly adhesive and stable, it has extremely high requirements for the process.

3. When choosing a paint-free board, you should choose the right thickness according to your own needs, if the thicker the degree of dismantling, of course, it will be relatively higher, but when choosing, it is not the main consideration of the thickness factor, it is important to meet our use requirements.

The above content is how to clean paint-free furniture and the purchase skills of paint-free boards, I hope that friends who see this article can help you, so that consumers who are ready to choose paint-free boards can understand better.

<>1. First of all, you need a bottle of carburetor cleaner, and then aim the nozzle of the carburetor cleaner at the place where there is self-spraying, and spray some cleaning agent. Then use a towel to wipe the self-spraying paint after spraying the carburetor cleaning agent, and wipe it with one wipe. 2. Banana oil.

Apply banana oil to the area where it has been stained with paint and wash it to achieve the effect. 3. Olive oil. Apply some to the self-painted area, rub it a few times to soak it thoroughly, and wash it with soap after a few minutes.