I want to change the flower pot, the flower has grown a lot of roots, what should I do if I can t ta

When changing the new pot, you should first soak the new pot in water, usually overnight, and then dry it. If the new pot is not cleaned and reused, it will be alkaline, which is not conducive to the growth of the plant. When changing the new pot, it is also necessary to carry out a comprehensive disinfection of the new pot to prevent potential germs from infecting the plant and affecting its growth.

If you are replacing the old pots, you should first place the old pots in the sun for about four or five hours to disinfect and sterilize them to prevent pests and diseases. When changing pots, it is best to leave a little more old soil on the roots, and do not transplant the roots with bare roots.

Remember to water it immediately after changing the pot, and water it thoroughly, place it in a cool place for about half a day, and wait for the plant to recover before you can maintain it normally. Try to prune off some dead branches to avoid nutrient loss. If the root system grows too vigorously, it needs to be pruned with sterilized scissors.

You can wash it with water to wash the soil little by little; Or don't water, wait for the soil in the pot to dry out, gently pat the wall around the pot, and when it is loose, the pot is upside down and drag the flowers out of the pot.

If it's a plastic pot, cut it with scissors and pour out all the dirt and flowers. If it is a clay pot or a porcelain pot, gently knock it out, and then pour out the whole clay with flowers.

This will not hurt the roots and will ensure that you will be transplanted successfully. The price is simply the loss of the original old pots.

Don't water it for the time being, and when the roots have less moisture, they will loosen up.

It's best to break and change the pot, if it doesn't work, you can only use tools to remove the soil little by little! That seems like a lot of work

Don't hurt the roots, broken flower pots are a good choice.

Nowadays, many people like to raise some flowers, plants, and succulents, and when these plants are cultivated in soil for a few years, some will grow and burst into pots, which are very vigorous. In this case, it is necessary to change the flower plant to a larger pot to raise, otherwise the growth of the root system will be limited, the absorption of water and soil fertility will also be limited, and the flower soil will be used for a long time, the fertility inside will also decline, and it is imperative to change the pot. So how to solve the problem when you can't take the flower pot when you change the pot?

When changing pots, the flowers can't be pulled out, you can gently tap the flower pot to make the flower pot and the soil better separated, and then you can use a small shovel to gently dig the soil. The plants are then slowly removed from the plants and replanted. When repotting, sandy, garden soil and humus can be mixed to make a cultivation medium.

Before potting, prune off the yellow, withered leaves and rhizomes of the flowers, then soak them in sterilized water for a while, then put them in a pot and compact the surrounding roots with fine soil.

1. Water control Under normal circumstances, potted flowers and plants, such as flowers and plants that have been cultivated for a long time, need to control water, about 3 5 days, let the soil stay dry, and then potted. This is to make it easier to remove the soil from the pot, so that the roots of the plants can better grasp the soil, so that the whole group can be taken out directly. If the soil is relatively loose, you can take it out little by little without controlling the water, or you can take it out of the basin smoothly.

If the water is controlled and the plant is still in the pot and it is difficult to take it out, then you need to use a knife or a wooden block to go around the pot to let the dirt come out of the pot. Flower pots, it's better to take it out. .

If the drainage hole is relatively large, you can use a wooden stick to knead it in the drainage hole a few times, which is also conducive to removing the plant.

2.Leverage Position the pot diagonally on the ground, then sit on the ground by yourself, pick up the plant at an angle of about 45°, grasp the root of the plant, and then place your foot on the edge of the pot while using a little force to pull the plant down. This method should be used to avoid injuring your feet.

Spring and autumn are the most suitable for changing pots and soil for flowers. However, some plants are also suitable for repotting in winter. Turning the pot is not possible in the hot summer.

When repotting, it should also be noted that the plant should not be repotted during the budding and flowering and fruiting periods, otherwise its growth will be damaged and its flowering or growth period will be missed.

Why can't the pots be replaced for the flowers that have just been bought, knowing the reason, many people regret it!

Hello, the flowers you just bought back can not be replaced, do not buy back to change the pot, if the pot is too urgent, the whole plant may not be adapted to growth, will affect the roots, but also cause damage to the branches and leaves. Place the purchased flowers in a suitable environment, maintain good maintenance methods, and wait for the flowers to adapt to the new environment before repotting. Loosen the soil in the pot before depotting, remove the flowers from the pot, remove the stale soil from the roots, and leave a little of the original soil at the roots.

Straighten the plant directly into a new pot, and raise it in a cool and ventilated place after planting, I hope it will help you

Water control. Normally, repot flowers and plants, such as flowers and plants that have been cultivated for a long time, need to control the water, about 3 to 5 days, let the soil stay dry, and then repot. This is done to facilitate the depotting and removal of the soil, and the root system of the plant also better grasps the soil, so that the whole clump can be taken out directly.

If the soil is relatively loose, then without water control, the soil can be taken out little by little, and it can be depotted smoothly.

If the water has been controlled, and the plants are still in the pot, and it is difficult to take them out, then you need to use a knife or a wooden block to rotate along the inside of the pot to let the soil out of the pot and take it out better. If the drainage hole is relatively large, you can use a wooden stick and rub it into the drainage hole a few times, which is also conducive to taking out the plants.

You can use chopsticks to poke it first to loosen the soil at the root, and then gently press it together against the flower pot to make it thinner, so that it is easier to hold.

It is necessary to control the water of the potted plants for about 3 to 5 days to keep the soil dry before repotting. If you still can't get it out, you can use a knife or a wooden block to rotate it around the inside of the pot to get the soil out of the pot so that it can be better removed.

1.Choose the right flower species.

The first step is to choose a flower species that is suitable for hydroponics. If you buy back the species that are not suitable for hydroponics and plant them, it will not be long before the roots rot and gradually die. Second, it is necessary to choose flower species with strong cold resistance.

Although some flowers are very suitable for hydroponics, they require higher temperatures for wintering, which is difficult for ordinary families to spend the winter safely, and is often susceptible to frost damage and death. The cold resistance is strong: monstera, purple-leaved duck grass, aloe vera, spider plant, umbrella grass, silver leaf chrysanthemum, golden millet orchid, leopard, ivy, pocket coconut, palm bamboo, etc.

2.Choose plants that have been adapted to hydroponic conditions.

Even flower species that are suitable for hydroponics still have to go through a process of adaptation. Some flowers and plants are immediately out of the soil and immediately after the flower market, although they seem to grow normally, but they must be identified when purchasing. It is necessary to choose plant material that has been cultivated in water for a period of time and can adapt to hydroponic conditions, and has normal growth, which is characterized by tall branches and leaves, full and shiny leaves, and roots or roots that have grown at the base of the stem that are suitable for hydroponic conditions.

3.Choose plants that are robust and free of pests and diseases. Such plants are not only conducive to the normal growth after hydroponics, but also conducive to reflecting the due appreciation effect of flowers.

You can properly cut the roots in the spring and then plant them in pots, and you can choose the kind that controls the roots. It is a good thing to have more roots, but it is not easy for a poor person with few roots to survive.