What are the components of an electric gondola?

The main accessories of the electric gondola are hoist, safety lock, suspension platform, suspension structure, and distribution box.

Wire rope, Ekrieter electric basket composition, and other accessories such as;Motor end cover, AC contactor.

Transformers, oil seals, switches, fuses, fuses, leakage circuit breakers, plugs, signal lights, steel belts, rope blocks, centrifugal speed limiters, brake pads, motor keys, rope inlet pipes, rope outlet tubes, rope block covers, rope block bottom plates, screws, motor junction box covers, rectifier devices, rope pressing devices, gear shafts, vertical motor turbines, pins, vertical motor pressure wheels, distribution boxes, motor junction boxes, tension noses, large rope self-locking devices, limit blue plates, junction boxes, motor blades, hoists, rear beams.

Counterweight racks, sockets, upper supports, thermal overloads, wire ropes, chicken heart card limit plates, cables, etc

What are the components of the hanging part of the construction gondola?

Gondola structure for working at height:

The structure is divided into three parts: suspension platform, wire rope and suspension mechanism.

The suspended platform includes a platform, a hoist hoist, a safety lock, a limit switch, and a control box.

The suspension mechanism includes a frame body and a counterweight.

The suspension mechanism is cantilevered at the front end, and the rear counterweight overcomes the overturning moment at the front end. The wire rope is hung on the suspension mechanism, and the wire rope is divided into a working rope and a safety rope. The hoist is generally a climbing type, the wire rope is coiled in the hoist, the hoist is connected with the platform, and the hoist climbs up and down along the wire rope with the platform.

Safety lock: When the working rope is broken, the suspension platform is locked on the safety rope.

Check whether the safety lock of the electric hanging basket is flexible, and the pulley should be light and brisk when digging for several days, and there should be no jamming.

1. Press the button to make the hoist idle

2. The safety rope of the electric hanging basket is inserted into the safety lock and the counterweight hammer is hung up. Start the hoist motor, thread the wire rope into the hoist, and the rope head should automatically come out of the rope outlet;

3. Assemble the gondola according to the electric gondola diagram. The counterweight iron should be equipped with sufficient weight. The torque of the counterweight end should be three times the torque of the electric gondola end (force arm = torque), and the joints should be firm and reliable;

5. After the electric gondola is assembled, the distance between the lifting rope and the safety lock should be adjusted. By moving the safety lock, the hanging basket is tilted 6° 8°, and the safety lock can lock the safety rope.

Contraindications. 1. It is strictly forbidden to carry out potato core adventure operations in the dangerous area of high-voltage power supply;

2. It is strictly forbidden to work on heights without railings or other safety measures and walk on one-way walls;

3. It is strictly forbidden to carry out risky operations in the dangerous area of high-voltage power supply;

4. It is strictly forbidden for operators to wear slippers, not to wear safety helmets and work permits, and to bring children into the construction site of the construction gondola;

5. It is strictly forbidden to smoke or light a fire with dangerous goods and flammable goods at the late collapse operation site;

6. It is strictly forbidden to drink alcohol, carry out high-altitude work with electric gondola and other workers.

1. Suspension mechanism: It is a steel structure frame erected at the top support of the building working surface and passed through the wire rope to bear the weight of the suspension platform and the rated load capacity.

2. Suspended platform: The base frame of the assembled platform is welded by steel (aluminum) plates, etc., and the bottom plate has anti-skid corrugations. The mounting frame is welded by steel pipes, and casters can be installed at the bottom, which is convenient for disassembly and movement during operation.

3. Hoist: The electromagnetic braking device of the hoist motor can be automatically engaged in the case of power failure or power supply interruption to generate braking torque, which can stop and support the suspension platform. In the case of power failure or power failure, the lever of the manual sliding device (placed in the handle of the hoist) is screwed (inserted) into the lever of the electromagnetic brake (in the motor windshield), and the brake is opened, which can make the suspension platform slide at a constant speed.

4. Safety lock: The safety lock must be tested within the time limit of the certificate of qualification. If the safety lock fails, it can be sent to the manufacturer for maintenance, and it is strictly forbidden for the user to disassemble and repair it by himself.

5. Working wire rope and safety wire rope: The working wire rope and the safety wire rope are the main components to bear the load of the hanging basket, so there are strict requirements for the wire rope used. The working wire rope and safety wire rope of the hanging basket are made of galvanized wire rope for the hanging basket, which has the characteristics of high strength and good anti-rust performance.

What are the main accessories of electric hanging baskets? The whole hanging basket machine is composed of suspension mechanism, suspension platform, hoist, safety lock, working wire rope, safety wire rope and electrical box and electrical control system.

Cheng:1Suspension mechanism.

2.Stroke limit block.

3.Safety locks.

4.Hoist.

5.Hammer. 6.Wheels against the wall.

7.Electrical box.

8.Suspended platform.

9.Working wire rope.

10.Safety wire rope.

The electric basket suspension mechanism is composed of a front beam, a middle beam, a rear beam, a front bracket, a rear bracket, an upper pillar, a counterweight, a reinforcing wire rope, a plug rod, a connecting sleeve, etc., and the front and rear beams are inserted in the middle beam and can be adjusted flexibly. In order to meet the requirements of the working environment, the height of the front and rear beams can be adjusted by adjusting the height of the insert rod, the height of adjustment is, the front and rear supports are equipped with rollers, which can be used to move the suspension mechanism, and the number of counterweights is configured according to the corresponding model, and the suspension mechanism is mainly composed of steel structure and generally will not be damaged.

The main accessories of the electric gondola are hoist, safety lock, suspension platform, suspension structure, distribution box, wire rope, Jinlida electric gondola and other accessories such as; Motor end cover, AC contactor, transformer, oil seal, switch, fuse, fuse, leakage circuit breaker, plug, signal light, steel belt, rope block, centrifugal speed limiter, brake pad, motor key, rope inlet pipe, rope outlet tube, rope block cover, rope block bottom plate, screw, motor junction box cover, rectifier device, rope pressing device, gear shaft, vertical motor turbine, pin, vertical motor pressure wheel, distribution box, motor junction box, tension nose, large rope self-locking device, limit blue plate, junction box, motor blade, hoist, Rear beam, counterweight frame, socket, upper support, thermal overload, wire rope, chicken heart card limit plate, cable,

This is the schematic diagram of the sturdy electric gondola counterweight that I found from the Internet**, you can see if it can meet your needs.

It's a matter of weight, there is no principle, the general standard counterweight is 25kg,

The electric gondola platform should be professionally designed and calculated and should be made of section steel and steel pipes, and its nodes should be welded or bolted, and steel pipes and fasteners (or bowl buckles) should not be used; The width of the electric gondola platform should not exceed 6m. When the bottom wrench is made of wood, the thickness shall not be less than 50mm; When using steel plates, there should be a non-slip structure. Protective railings should be set around the electric gondola platform, except for the height of the railing on the side of the building, the height of the remaining side railings shall not be less than 1 2m.

A 180mm high foot guard should be set at the bottom of the railing, and a head guard shed should be set at the top of the electric hanging basket, and safety nets should be applied to the outside and both ends. The electric hanging basket should be provided with a fixed lifting ring, and its position should not be 800mm smaller from the bottom. Henan electric gondola platform should be marked in a conspicuous place with the maximum use load (number of people) and precautions.