How do you get honey out of a hive? How to extract honey from a beehive

Updated on society 2024-07-14
17 answers
  1. Anonymous users2024-02-12

    There are different ways to take honey, usually clean the bees on the honeycomb first, then cut the honey cover, and then put the cut honey spleen into the honey shaker to get honey. Some use fully automatic honey extraction equipment, which is more convenient and simple to take honey, and can be filled directly after filtration.

  2. Anonymous users2024-02-11

    Look at what breeding methods we use, in fact, as far as the way of beekeeping is concerned, it is nothing more than beekeeping without foundation and beekeeping, according to the quality of honey we take, if we take mature honey, the general time can be morning, or afternoon, if we take honey quality is not high, it is generally better to take honey in the morning, and the specific quality of honey, we should also refer to the nectar time of the local nectar source plants, if there is a large amount of nectar in the evening, in fact, it is better to take honey in the morning, If there is a large amount of nectar flowing in the morning, it is better to take the nectar in the afternoon. In terms of the impact on bees, it is recommended to take honey in the afternoon and take mature honey. And the specific method of honey extraction should be based on our breeding methods.

    First: there is a base breeding.

    In fact, as long as there is no nest base, whether it is soil or live frame breeding, the use of honey shaker is not very good, in the case of nest base, because the nest base toughness is good, not easy to break, so as long as it contains the nest base, you can use the honey shaker to take honey, but to contain the nest base frame, in fact, it is what we often say that the live frame breeding, this kind of honey is suitable for using the honey shaker, the nest base can also be used for the second time, is the current use of more breeding methods.

    Beekeeping, how to get honey? There is a hierarchy within the colony.

    Is it? These 3 methods of taking honey are too practical.

    Second: there is no basis for honey.

    If it does not contain the nest base, it is generally a bee, and the honeycomb spleen is fragile and will be destroyed if you are not careful, so for the bee spleen without the nest base, it is generally not suitable to use a honey shaker to extract honey, and the simplest thing is to squeeze honey or use the past hand-twisting method to extract honey.

    Third: local honey extraction.

    If we don't want to remove the honey from the whole bee spleen, but take a part, such as only the capped honey on the top, in this case, we use a spoon to take the honey, that is, after the bees are shaken clean, the honey on the bee spleen is dug out with a spoon, scraped off along the nest frame, and then put back into the colony for the bees to process.

  3. Anonymous users2024-02-10

    First: breeding methods.

    This method is in the past we common barrel farming method, which does not put the nest foundation, and is cultivated by the bees to make their own spleen, which belongs to the semi-wild breeding method, and takes less honey, generally takes honey once or twice a year, and can take honey three times in places where the honey source is abundant. Common breeding methods are divided into two kinds of barrels and boxes, barrels are used to hollow out wooden sticks to breed, generally divided into horizontal breeding and vertical breeding two ways, and the box is generally composed of six boards to form a beehive, also divided into vertical and horizontal two ways, there are many kinds of beehives, there are no standard specifications, beekeepers around the country are free to play, are no nest based breeding methods.

    In addition to the above two ways, in fact, there is a breeding method for bees is relatively rare, but some places use such a breeding method, that is, the lattice box to take honey, this kind of beehive can be said to be a typical type of bee multi-box breeding, the breeding method is the same as the above breeding method, and the honey is also the same way, but the lattice box stratified the beehive, and the size of the lattice box can be controlled according to the bee colony potential.

    Second: the way to take honey.

    The honey extraction method of this breeding method is after the honey is mature, and it is generally based on the large amount of honey in the bee colony, and there is rarely a cap. When taking honey, smoke bees to expose the nest spleen, and then use the honey cutting knife to cut off the honey spleen and pack it, filter it with a strainer, because this sugar spleen has no nest base, it is impossible to use centrifugal separation honey shaker, and most of the honey is obtained by hand squeezing. This breeding method is generally the breeding of bees, which is what we often call soil honey, and the sales in the market are relatively high.

  4. Anonymous users2024-02-09

    Hello 1, if it is the kind of breeding, use a honey shaker to throw it out.

    2. If it is the kind of wild life that is irregular, it is recommended to put it in a stainless steel pot, add a little temperature, and then, find a nylon wire mesh or mosquito net cloth to filter and squeeze it, and then put it in a glass bottle.

  5. Anonymous users2024-02-08

    Use shake bai

    Honey machine, used to shake honey and take honey equipment, this process is also very simple, only need to cut off the version of the cap of the nest spleen, let into the honey shaker, and then turn the handle, let the nest spleen rotate at high speed, through the action of centrifugal force to let the liquid honey out of the hive, this is the process of shaking honey.

    When there is honey in the bee colony, the beekeeper opens the beehive, prepares the centrifugal separation shaker, and adopts the method of multi-person cooperation, one person is responsible for taking out the honeycomb from the beehive, one person is responsible for transporting, and one person is responsible for separating the cover of the honeycomb and shaking the honey.

    This kind of honey extraction is relatively simple, because the two frames in the centrifugal separation honey shaker can just put a bee spleen, so just cut off the cover of the honey spleen, put the honey spleen into the frame to shake the honey.

  6. Anonymous users2024-02-07

    Very primitive method.

    Bai is to use a large iron oil drum to wash the cover, find the center of the circle in the bottom part of the shaft to bear, in the upper version.

    To make a cross fork (detachable), you also have the right to find the center of the circle to make a hole, and use a relatively suitable steel bar to bend it into a Z-shape and insert it from above. Make four symmetrical interlayers in the middle of the rebar that can be inserted into the honeycomb. When shaking the honey, shake off all the bees, cut the cover of the honeycomb with a sharp blade and put it in the four interlayers of the "honey shaker" to rotate evenly to take out the honey.

  7. Anonymous users2024-02-06

    Turn the hive inside out and gently tap the hive to let the bees go.

  8. Anonymous users2024-02-05

    How is honey extracted? The hive is like a natural bioproduct factory, and honey can be extracted in seven days!

  9. Anonymous users2024-02-04

    The process of using a honey shaker is also very simple, you only need to cut off the nest spleen of the lid and let it into the honey shaker

  10. Anonymous users2024-02-03

    1. Shake the honey peak.

    Shake off all the honey peaks on the bee spleen, it is the first process, and it can also be said to be the most difficult process in taking honey, in a very short period of time, the bee spleen continues to shake off so many honey peaks many times, and the technical standard is relatively high.

    2. Cut the seal.

    After the honey peaks are flown away, there is a bee spleen left, because the pure honey is mature, so the pure honey will be sealed with liquid paraffin, and the seal needs to be cut open with a professional scraper, and the pure honey can be seen. It should be noted that the top and bottom of the bee spleen are sealed, but only the top is pure honey, the bottom is the child spleen, and the inside is the unborn bee. This point is not the same as the bee, the bee is generally a double-layer small box, the next layer of breeding, the top layer of professional storage of pure honey, so when the bee takes honey, a whole piece of bee spleen is full of pure honey, and the bee spleen of the soil bee is only the upper part of pure honey.

    space honey how to take out.

    3. Shake honey. Then it is to shake the honey, the previous old bee water and land method will cut off the bee spleen, squeeze out the pure honey, the bee spleen will be destroyed, and the contemporary bee raising method uses the basic principle of suction filtration, with a professional honey shaker to shake the pure honey out, the pure honey shake out after the bee spleen is still intact, the honey peaks are tired and tired to make the house is not easy to destroy, so in a flowering period can be taken several times honey.

    Four: When taking honey, it is inevitable that a small amount of honey will be abandoned, so pure honey should also be considered and the residue should be removed. Nowadays, some people who sell fake honey in order to make consumers trust, they will get a few dead honey peaks and put them into pure honey, in fact, this kind of pure honey is best not to buy, just an excuse, like us who make pure honey, this kind of removal can not catch up.

    Pure honey can be sold after consideration, because of pure natural honey, it is not easy to do all the production and processing. Finally, one more point, many people may have seen the kind of honey peak that only leaves honey once or twice a year in the farmhouse, and I don't know much about shaking honey, in fact, it is relatively simple, the old bee raising method will destroy the bee spleen, and it is not easy to shake honey, pure honey is still the same, just the honey method is different.

    2. Common problems when obtaining liquid paraffin.

    space honey how to take out.

    1. In the case of obtaining liquid paraffin, it must be obtained in a very clean natural environment, so as to ensure that the liquid paraffin after acquisition is very clean and hygienic.

    2. Do not liquid paraffin wax is the easiest to ignite, so everyone must be careful to prevent **.

  11. Anonymous users2024-02-02

    How is honey extracted? I don't think you can even think of this method.

  12. Anonymous users2024-02-01

    It is recommended that inexperienced friends do not rashly try to take wild honey, wild bees usually have a weaker ability to collect honey and a stronger desire to protect food, if they do not have enough experience and comprehensive protection measures, they are easy to get injured.

  13. Anonymous users2024-01-31

    One: Shake off all the bees on the bee spleen, this is the first step, and it can be said to be the most difficult step in taking honey, shaking the bee spleen several times in a very short time will be so much.

  14. Anonymous users2024-01-30

    Summary. Hello. Steps to extract honey from the hive; Find a large iron oil drum, remove the lid and wash it.

    Find the center of the circle to mount the bearing at the bottom, make a detachable cross fork in the upper part, and also find the center of the circle to make a hole. Insert a relatively suitable steel bar from above by bending it into a z-shape. Make four symmetrical interlayers in the middle of the rebar that can be inserted into the honeycomb.

    When shaking the honey, shake off all the bees, and cut the cover of the honeycomb with a sharp blade. Put it on the four interlayers of the honey shaker, turn it evenly and take out the honey.

    How do you get honey out of a hive?

    Hello. Steps to extract honey from the hive; Find a large iron oil drum, remove the lid and wash it. Find the center of the circle to mount the bearing at the bottom, make a detachable cross fork in the upper part, and also find the center of the circle to make a hole.

    Insert a relatively suitable steel bar from above by bending it into a z-shape. Make four symmetrical interlayers in the middle of the rebar that can be inserted into the honeycomb. When shaking the honey, shake off all the bees, and cut the cover of the honeycomb with a sharp blade.

    Put it on the four interlayers of the honey shaker, turn it evenly and take out the honey.

    Hello. Honey efficacy and function; Replenishing, moisturizing, relieving pain, relieving du honey sweetness, xingping, into the heart, lungs, spleen, large intestine meridian, with the effect of tonifying, moisturizing, relieving pain, relieving du, for dry cough, intestinal dryness, constipation, stomach pain, mouth, nose and mouth sores, soup fire scald has a good effect. Suitable for people with weak spleen and stomach, people with dry lungs and cough for a long time, and people with internal heat and constipation.

  15. Anonymous users2024-01-29

    Use a honey shaker.

    The honey shaker is specially used to shake the honey and take the honey equipment, this process is also very simple, only need to cut off the cap of the nest spleen into the honey shaker, and then turn the handle, let the nest spleen rotate at high speed, through the action of centrifugal force to let the liquid honey from the honeycomb thrown out, this is the process of shaking honey, can save time and effort, this honey shaker still needs manpower.

  16. Anonymous users2024-01-28

    1. The method of extracting honey is mainly divided into four steps: fumigation, bee brushing, honey shaking, and worrying, namely: before taking the hive, use the lit dried wormwood to lavender the bee, and slide the residue to make it escape from the hive frame; The second is to take out the nest frame and use a bee brush to brush off the bees that are still attached to the nest frame; Then the nest frame is loaded into the honey shaker, and the honey on the honeycomb is thrown onto the wall of the honey shaker by quickly shaking the handle, using centrifugal force, and then flowing into the bucket to give way; Finally, pour the honey through a strainer and serve.

    2. Honey is a sweet substance made by bees to collect the nectar of plants, brewed by bees, at room temperature (20 degrees), honey is a viscous transparent gelatinous liquid, with a specific gravity of 4-5, generally light in color and light in aroma; dark in color, with a strong aroma; The more viscous the honey, the higher the concentration, and the thinner the lower the concentration.

  17. Anonymous users2024-01-27

    Summary. Hello dear, the temperature of the steam can melt the hive, and the honey will come out naturally, but the bee can not be at high temperature, and the nutrients will be lost, so the steaming method is not recommended, and it can be squeezed out with a tool.

    Can the beehive be steamed for honey?

    Hello dear, the temperature of the steam can melt the hive, and the honey will come out naturally, but the bee can not be at high temperature, and the nutrients will be lost, so the steaming method is not recommended, and it can be squeezed out with a tool.

    Oh. Hello pro 1, squeezing honey, this method of honey extraction is the oldest, and there are many ways to take it. Generally, the honey is taken out by squeezing after the honeycomb is cut, and some are even directly pinched by hand, and then the impurities are filtered with a strainer.

    Listening to the words of bees, I feel that this method makes people feel a little unhygienic. There are still many people who use this "soil" method in soil bee raising. 2. Distillation honey extraction, this method is improved on the basis of pressing honey, mainly for hygiene.

    The honey flows out automatically due to thermal expansion and contraction by heating through water. This method looks hygienic and clean, but listening to the words of bees, I feel that this method has two very big disadvantages, the first is that the method of distilling honey is too cumbersome and slow; The second is to distill honey because it needs to be heated, if the temperature is not well controlled, it will cause great damage to the nutrition of honey. Even if the nutrients of honey are not destroyed, once the honey has been heated, it will not have the original flavor at the beginning.

    Distilled honey is used in both soil and live frame beekeeping. 3. Centrifugal honey extraction, centrifugal honey extraction method is now the most commonly used, and it is also the most used method. This method is easy to operate, fast, does not affect the nutrients, and the nest spleen can be reused, which has very outstanding advantages compared with the above two.

    The only small regret is that the honey shaker used in this method is not easy to clean, if it is not used for a few months, even if it is covered with a dust cloth, it may fall dust, and it is easy to fall dust or stain during handling, and it is easy to breed bacteria if it is not cleaned for a long time.

Related questions
15 answers2024-07-14

This requires the help of audio software to extract the human voice separately, which needs to be operated on the computer, such as PR.

6 answers2024-07-14

I did one such repair, the blade screw broke, smashed the power switch of the pitch control cabinet, only to find that the screw was broken. >>>More

14 answers2024-07-14

1. Put it on the stove in a steel basin to dry, and scrape the waxed honey into the basin. >>>More

18 answers2024-07-14

Enter the following formula in columns b, c, d, e, f, and g in column a: >>>More

5 answers2024-07-14

1.Real honey spicy throat.

2.Real honey tastes like a floral flavor. >>>More