Can hibiscus be pruned now? Can a cut branch be revived?

Updated on home 2024-07-08
11 answers
  1. Anonymous users2024-02-12

    In summer, it is best not to reduce the branches and leaves, and the cut branches and leaves can be inserted, but it is generally easier to live when the temperature is relatively low.

  2. Anonymous users2024-02-11

    Not yet, because the reproduction rate of hibiscus is relatively low, and the growth rate is also very slow. Generally, if you cut off the branches, they will die and will not survive.

  3. Anonymous users2024-02-10

    Hibiscus can't cut the branches now, and the cut branches can't be cut now, but they can be planted in spring or winter, and it's too hot this season.

  4. Anonymous users2024-02-09

    1. Seedling pruning: Fusang in the breeding process of a little maintenance, it will grow fast and strong, but the branch growth will be very messy, the tree shape is not beautiful, so in order to ensure the beautiful shape of the tree, we pluck it at about 15cm in the seedling, only retain 2-3 branches, and carry out the second topping after the new branch grows for a period of time, which can promote the branching of the plant, and the number of flowers in the future is also more.

    2. Pruning of large seedlings: After the growth of Fusang, we need to shape it according to its growth state, and prune off weak, pests and diseases, and unreasonable branches. If the branches are too dense, they should also be pruned to improve the ventilation and light of the plants, and the pruning time is best chosen during the dormant period of the plants.

    3. Pruning of flower branches and old plants: Pruning of flower branches after the flowers are gone, and cut off the branches that have withered the flowers, so as to avoid the consumption of nutrients and provide sufficient nutrients for the next flowering. The old plants are re-pruned every two years to prune some of the old branches to promote the germination of new branches.

    Extended Materials. When we prune, we should decide whether to prune according to the growth state of the plant, and be careful during the pruning process, mainly not to hurt other branches, and not to prune too much, as excessive pruning will affect the flowering of the plant. Pruning should be selected as much as possible in the dormant period of the plant, and water and fertilizer should be applied in time after pruning, one is to supplement consumption, and the other is to accelerate its growth and promote branching.

  5. Anonymous users2024-02-08

    The branches of Fuso have strong germination power, and pruning at the right time can not only keep the tree neat and tidy, but also allow for more flowering. Generally, after flowering every year, long branches, diseased and insect branches, weak branches, cross branches and overlapping branches are thinned to promote the germination of new branches and more flowering. For plants that have been flowering for 2 to 3 years, they can be re-pruned every 1 2 years, and 2 3 buds are retained at the base of each side branch, and the upper part is cut off to promote the germination of new branches, so that the growth is more vigorous and the flowers are colorful.

    Since Fuso blooms on the new shoots of the year, it is only by constantly promoting its vigorous growth that it can germinate more branches and continue to bloom. For this reason, it is necessary to apply thin fertilizer frequently in cultivation to promote its vigorous growth and new branches to achieve the purpose of more flowering. Fuso is mainly propagated by cuttings.

    When the cuttings grow to a height of about 20 cm, the topping is carried out, which can promote the germination of the axillary buds at the base. When the axillary buds germinate new branches, select 3 or 4 new branches with more consistent growth and uniform distribution, and cut off the rest.

  6. Anonymous users2024-02-07

    The pruning methods of hibiscus are as follows:

    1.Pruning of seedlings If the potted Fuso is allowed to grow naturally, the branches are often unevenly distributed, the subordination of the main and side branches is not obvious, and the tree shape is not beautiful and the ornamental value is reduced. In cultivation, the tree can be pruned into different shapes according to each person's preference.

    If you want to prune into a single trunk small tree shape, you can pluck the topping when the seedling is 15 cm high, select 2 to 3 new shoots as the backbone branches, and when the new shoots grow to about 10 cm, the second topping, the year can begin to take shape.

    2.Pruning large trees should be modeled according to the morphology of the plant. For plants with not too long branches, only need to trim off some unreasonable growth branches and diseased branches, as well as overgrown cross branches and overlapping branches, etc., to improve ventilation and light conditions and promote the growth of plants.

    For plants that are not in good shape, such as bare in the lower part of the canopy, or plants that grow too high, they should be re-pruned during the dormant period of Fuso. Generally, 2 to 3 side branches or buds can be left at the base of each side branch, and the top branch can be pruned to dwarf the plant and germinate strong new branches, forming a beautiful crown.

  7. Anonymous users2024-02-06

    When the plant is only 15 cm old, pluck the top, leave two or three new shoots as the backbone, and when the new shoots grow to 10 cm, you can clearly see the shape it presents.

    Mulberry flowers generally start to cut off some long branches and diseased branches after the flowers, so that it can be sprouted, and it can also make the hibiscus flowers bloom more in the next year.

    Of course, it is also possible to re-prune the plants that have already bloomed, and when pruning, you can keep the buds to promote the germination of new branches, so that the growth will be more vigorous and the flowers will be more colorful. Adult old hibiscus flowers should be re-pruned every 1-2 years.

    When pruning hibiscus, you must pay attention to the tree momentum of the plant, do not rush to the scissors, if you are too hasty, pruning too heavy, not only can not quickly expand the crown, but also delay flowering, so be careful, the incision is level with the base of the branch branches, to prevent damage to other branches.

    The bud retention point is also very important, generally leaving the outer bud, not the inner bud, and the top of the cut should be higher than the place where the bud is left. After pruning, it is necessary to reduce the application of water and fertilizer appropriately, and it is easy to die if it is not properly cared for.

  8. Anonymous users2024-02-05

    Hibiscus grows quickly, so every time it blooms, it is necessary to cut off more than half of the flowers and the branches below them to encourage new shoots to continue flowering. You can also control the shape to avoid being too bulky. Seek adoption.

  9. Anonymous users2024-02-04

    Tips for flower cuttings! The cuttings process of hibiscus flowers is simple and easy to learn, and the survival rate is high.

  10. Anonymous users2024-02-03

    If the hibiscus grows too tall, the branches are many and long, and they look messy, and the bottom leaves are scarce, and the top leaves are denser, then you can cut off the lower part of the bare leaf and cut the cut branches again. Or prune and adjust the shape of the tree to form a reasonable tree structure, control unnecessary vegetative growth, and promote tissue enrichment, so Fuso should be re-pruned at least once after half a month after entering the room and before leaving the room in the spring of the following year. When pruning, it is necessary to pay attention to the internal and external orientation of the remaining buds, so as to control the growth direction of the branches in the future, and apply callus antiseptic film to protect the pruning mouth from healing quickly and prevent virus infection.

    Pruning and maintenance methods of hibiscus flowers in different growth periods:

    1.When the seedlings grow to a height of 15 cm, the topping is carried out to encourage the lower part to extract axillary buds. In the process of budding and branching at the base, 3-4 new piggybacks were selected as the backbone branches. When the new shoots grow 4-5 leaves, the second topping is carried out, and the tree shape of 5-7 side branches can be formed in the same year.

    Later, the plants can be pruned each spring in conjunction with repotting;

    2.Generally, after each flowering, steep branches, diseased branches, weak branches, cross branches and overlapping branches can be thinned to promote their germination of new branches and more flowering. The flowering plants can be re-pruned, the upper part can be cut off to make the base of the side branches, and the budding will be retained to promote the germination of new branches, so that the growth will be more vigorous and the flowers will be more colorful;

    3.For the old Fuso planters, re-pruning should be carried out every 1-2 years, generally leaving 2-3 basal buds for each side branch, so as to promote the germination of strong new branches; Second, it can dwarf the plant. Branches that have been re-pruned will bloom later than older branches.

    However, after heavy pruning, if the water and fertilizer are sufficient and the maintenance is done properly, the plant will grow very vigorously, and there are many flowers, large flowers, and bright colors. If the plant shape of the hibiscus is better, the branches are not too long, and the leaves do not fall off, then you can not prune, as long as you cut off some of its unreasonable branches and diseased branches, and then prune after flowering, so that the tree can be controlled too large.

  11. Anonymous users2024-02-02

    Summary. It may be caused by soil discomfort, and loose and fertile slightly acidic soil should be provided. It may also be caused by a lack of fertilizer or uneven fertilization, so it is necessary to fertilize in time, and apply phosphorus and potassium fertilizer before flowering.

    It may be caused by soil discomfort, and loose and fertile slightly acidic soil should be provided. It may also be caused by a lack of fertilizer or uneven fertilization, so it is necessary to fertilize in a timely manner, and apply phosphorus and potassium fertilizer before blooming.

    It may also be caused by unreasonable watering, and reasonable watering should be adjusted.

    Or it may be caused by temperature discomfort, and the temperature can be kept at around 20-35.

    Hope mine can help you.

    I wish you good health and a happy life!

    Thank you. You're welcome, I hope it can help you <>

Related questions
6 answers2024-07-08

Can be grafted! I found a paragraph for you, take a look! Osmanthus grafting propagation generally uses privet or water wax as rootstock. >>>More

10 answers2024-07-08

OK. Eggshells are rich in calcium carbonate, which can be used as fertilizer to adjust the pH of the soil, and eggshells are also long-lasting phosphate fertilizers, which can effectively promote plant growth. Eggshells can not only be used as fertilizer for flowers, but also have the following uses: >>>More

6 answers2024-07-08

Beautiful morning glory, bright morning glory, beautiful morning glory. >>>More

16 answers2024-07-08

Yes, fresh jasmine can be used not only for tea, but also for many other purposes: jasmine is the parent spice for blending various edible cooking "chemicals" and food flavors. >>>More

1 answers2024-07-08

Lanyou has been planting orchid grass with bark for more than 10 years, and when he first learned to raise orchids, he also learned this method from books, which made a special introduction to the efficacy of willow bark orchid planting. It is said that it contains salicylic acid, which can enhance the resistance of the orchid plant and help the orchid plant to be strong. Since then, often go to the river to collect some dead willow bark as planting material, but the resources of willow bark are limited, and then to the wood processing factory, where there is a large amount of pine bark and fir bark, pull back with repair scissors to cut the bark into small pieces of five to ten centimeters, put it into a woven bag, while pouring the rice and then pile it aside, every ten days and half a month and then pour some rice water, about three months later, the fermentation is successful, and the fermented bark is easy to cut into small pieces of about one centimeter with pruning shears. >>>More