What are the causes and treatment methods of the blind buds?

To sum up, there are about the following 4 causes of blind buds.

1. Insufficient fertilizer and water.

The most fundamental reason for the appearance of blind branches in the moon season is the lack of fertilizer and water, and the flowers in the moon season.

Fast growth, more flowering, more fertilizer and water demand, if the top dressing is not timely, or rarely top dressing, it is easy to lack nutrition, and blind buds appear. Especially bonsai.

The growth space is very limited, and it is easy to have a large number of blind branches due to lack of fertilizer.

To prevent the shortage of fertilizer and water, it is necessary to insist on topdressing liquid fast-acting fertilizer once a week and fermented organic fertilizer every 1-3 months during the growing period of the month and season to keep the soil fertilizer sufficient and reduce the appearance of blind branches.

2. Insufficient light.

Another big reason for the appearance of blind branches in the moon flowers is the lack of light. The moon flower is a strong positive flower, germination and the growth of new shoots, and the gestation of flower buds require sufficient light, if the light is insufficient, the new branches will be stunted and become blind branches.

It should be noted here that it does not mean that if you place the moon season in a place with enough light, there will be no lack of light, and local lack of light will also lead to blind branches in the moon season.

For example, when the bud point in or below the plant germinates, because the sunlight is blocked by the upper branches and leaves, some of the bud points cannot receive light, and cannot grow normally, and finally it will become a short blind branch.

In order to avoid the appearance of these short blind branches, it is necessary to do budding in the early stage of germination, and directly erase some weak buds and buds in the internal lack of light to reduce the occurrence of blind buds. For the operation of wiping buds, you can refer to the introduction in the book How to Raise the Explosion of the Moon from Zero.

3. The branches themselves are weak.

Weak shoots are another cause of blind buds, and if they are not pruned properly in winter and the weaker shoots are retained, such shoots are likely to become blind buds that cannot bloom after germination. Therefore, when pruning in winter, it is necessary to pay attention to the pruning in place, and the branches that are too thin should be cut off.

4. Poor root system and poor absorption.

If the root system of the moon flower is relatively weak and absorbs less nutrients, a large number of blind branches will also appear. For example, the new seedlings obtained by high-altitude stripping, because the root system is not very many, often the first sprouts will become blind shoots that cannot bloom. In this case, there is no need to worry, as long as you continue to maintain, after the root system grows full, the new shoots can naturally bloom normally.

1. Temperature leads to blind branches and blind buds in the moon season

High temperature in summer, when the moon season is in a high temperature exposure environment, the top of the branches of the moon season is easy to burn and wither, the buds retract and have no vitality, it is easy to cause blind branches and blind buds, so we will see a large number of invalid bud points and wilted branches, so we generally have to do some shade and sun protection treatment in the summer maintenance month.

2. Light causes blind branches and blind buds

The growth strength of the branches in the month and the severity of the pests and diseases of the branches can be related to the space of the branches, and the maintenance of the branches should pay attention to the spatial density of the branches, which is related to the light, if the branches are too dense and scattered, the light is not sufficient, it is easy to cause serious diseases and pests of the branches, and the branches wilt and yellow leaves, so that the probability of blind branches and blind buds will be very high.

3. Pruning leads to blind branches and blind buds

In the summer, pruning is very important, the purpose of pruning is to promote light and promote the extraction of new shoots, and the growth of branches in the month is very weak, at this time pruning at will, the appearance of wounds and nutrients can easily cause blind branches and blind buds.

4. Too much nitrogen fertilizer leads to blind branches and blind buds in the monthly season

Yueji is very fond of fertilizer, in the maintenance of the Yueji, all year round to do a good job of nutritional management, after spring flowering, waste a lot of nutrients, summer to supplement nutrition, so that the Yueji to restore the tree, but if the nitrogen fertilizer is too much, the Yueji branches appear to grow, the long branches have poor resistance, it is easy to cause the Yueji blind branches and blind buds.

5. Variety problems lead to blind branches and blind buds in the moon season

There are many varieties of the moon season, some of them are sun-resistant, some are disease-resistant, and some of them do not bloom in summer, and a large number of blind branches and blind buds will appear in the summer when they do not bloom.

Because there are no flower buds, there are a large number of leaves for photosynthesis in the moon season, and the fertilizer and water in the ground are also sufficient, which promotes the basic germination of a large number of bamboo shoot buds in the moon season, so the bamboo shoot buds grow vigorously.

After the leaves of the shoot buds turn green, the weak old branches can be cut off, and the blind branches that meet the flowering conditions can be lightly pruned to make them sprout and bloom again.

How do blind buds arise and how to solve them?

1.Lack of light. If there is no light, the moon flower will grow blind buds. It is enough to put the moon flowers in a well-lit place.

2.Undernutrition. You can put a little flower fertilizer in the pot so that this will not happen.

It is very likely that the moon flowers have received super sunlight in the process of growth, it may be because the temperature is relatively high, or it may be because the watering is not particularly much, at this time it is necessary to transplant to a place with more air circulation, and there is fertilizer and watering.

It may be because of the lack of light that blind buds are born. We must put the moon flowers in the sun, and maintain more than 5 hours of light time a day.

It is because there is no timely pruning in the process of growth, in this case, such blind buds will appear, and in this case, it should be pruned in time, so as to ensure that the flowers bloom well.

This is due to the fact that there is some lack of water at the time of planting, and there is also some lack of nutrient solution, and it is likely that there is not enough light to get it. In such a situation, it should be watered and fertilized in time, and it should also be planted in a sunny place.

There may be a lack of light, not very much light, or it may be malnourished and the soil is not fertile enough. You can let them bask in the sun as much as you want, and you can fertilize it a little.

It's because it's undernourished. You should renovate the soil a little and then water the flowers with more water and fertilizer so that the flowers can bloom very well.

Because when the moon flower reaches a certain state, the growth will be inhibited, and blind buds will be born. You need to cut off the blind buds directly.

It is because of the overnutrition of the moon flower that causes the germination of those blind buds, so just cut off all these blind buds.

That's because we ignore a lot of problems when cultivating, so this situation will occur, so when cultivating moon flowers, we should supplement sufficient water and nutrients, and there should also be sunlight, so that it is more perfect.

The main reason is that the plant itself has such genetic selection, so there is such a situation, these blind buds can be pruned.

Because the moon flower lacks nutrients in the process of growth. If you want to solve such a problem, you should apply more fertilizer to the moon flowers.

The seedlings are all blind buds, which may be caused by insufficient light or insufficient nutrients of the plants. The plant has blind buds, and the blind buds of the plant need to be cut off first, which can promote the germination of new shoots. If the plant is not lit enough, it can be moved to an outdoor location with sufficient light, and if the nutrients are insufficient, the plant can be supplemented with fertilizer, which is conducive to the growth of new shoots.

Yueji is a common ornamental flower, during the budding period, if the light is insufficient, the plant will grow blind buds, and blind buds will affect the flowering of plants in the later stage. If the plant has blind buds, they need to be cut off to promote the germination of new shoots. In the later stage of maintenance, it is necessary to move the plants to a well-lit location outdoors for maintenance, and give the plants sufficient light.

The seedlings of the moon flower are all blind buds, which may be due to the lack of nutrients in the plants, the lack of nutrients in the plants, and the lack of nutrients, and the young shoots cannot grow normally. If the plant lacks nutrients, after cutting off the blind buds, it is necessary to supplement the plant with fertilizer in time. During the growth period of the seedlings, the fertilizer is mainly nitrogen fertilizer, which can promote the growth of plant shoots, branches and leaves.

In the case of adult moon and blind buds, in addition to light and nutrients, it may also be caused by a lack of pruning of the plant. The growth rate is faster in the monthly season, and the plants can bloom in multiple seasons, and the plants need to be pruned and trimmed every year. If the plant is not pruned in time, long branches, dense branches, heavy branches and old branches will consume a lot of nutrients, which is not conducive to the growth of new shoots.

The plants are warm-loving, and the plants are suitable for growing in warm, cool and well-ventilated climates. During the maintenance period, the plants need to be pruned properly, and the plants should be given sufficient light, water and fertilizer to provide sufficient nutrients for the plants, which can promote the growth of new shoots and branches. During the growth period, the plants should also be sprayed with fungicides to prevent pests and diseases.

If you find that the blind buds grow more lushly, then quickly cut off these growth cumbersome, because with them, it is difficult to bloom early. If these blind buds are not pruned, the branch where the blind buds are located will no longer be able to sprout new branches and flower buds, so this year's flowering will be halved. On the contrary, if these blind shoots are detected and cut off early, many small shoots will soon grow in the pruning part of the blind buds, and some healthy shoots will also grow quickly, so that the chances of flowering are much greater.

If you find that the branches and leaves of the moon plant with blind buds are sparse, there are not a few branches, and there is nothing left after removing the blind buds, in this case, do not blindly prune, keep the blind buds properly, keep the growth state, and wait until the plant germinates new branches and leaves, and when it grows more lush, then start pruning the blind buds.

If you find the blind buds at this time, do not prune, in this case, you should completely retain these blind buds. In this case, you must not be impulsive, you must be merciful, because the resistance of the newly transplanted moon season is poor, and photosynthesis can not be carried out, if it is pruned at this time, the wound is easy to invade the germs, which is very unfavorable to the survival of the plant.

Of course, if you wait until the plant recovers its growth, it is still necessary to prune the blind buds according to the growth situation, cut off the blind buds, promote the germination of new branches, and wait until the plant grows up, it is easy to flower.

In fact, many blind branches can not be found early, only after the maturity of the top bud withered, we can be confirmed, pruning if the branches are shorter, directly cut all on the line, if the branches are longer then short, only cut off about 1 3 of the branches, retain the growth point on the branch, so that it can germinate more new branches.

However, those bud points or branches (or buds) that cannot form flower buds can be identified as blind buds or branches.

The main reason for the occurrence of blind buds is low temperature, low light, insufficient water supply during germination, insufficient or unbalanced plant nutrient reserves, and of course, high temperature radiation and other reasons, usually in the spring of the year after low light and low temperature in winter, a large number of spring buds germinate, and the nutrients consumed by the overlapping bud points of the plant are great (the erasure of overlapping bud points is conducive to reducing the probability of blind buds), which causes the appearance of blind buds, so if you want to obtain high-quality flowering, you must remove the blind buds produced, On the one hand, it is beneficial for the plant not to consume unnecessary nutrients, and on the other hand, it strengthens the ventilation inside the plant (usually the inward bud point has evolved into a blind bud before being affected by phototropism), and at the same time, if the blind branch is formed, its own disease resistance and immunity are also much reduced.

Blind bud form: stop growing after 2 pairs of leaves or multiple leaves; Flowering branches form blind buds; Some of the top of the main branches form blind buds, that is, blind branches, also known as the self-capping of the plant, in this case, the growth will stop in the moon season, and usually the bottom bud point can re-germinate as a new branch after 45 days. Typical blind bud form, only need to be removed, in the budding stage can be judged, with fingers to unscrew If there is a latent bud point at the base of the bud point, the flowering branch is cut off, leaving the front end of the nutrient reserve tissue, most of the vine and large Austin winter pruning can also refer to the method of pruning.

c blind branch treatment, the main branch in a certain stage of growth, the top bud point disappears, back to the full bud point can be, the way is similar to the same flower after pruning, back pruning 2-3 pairs of leaves (depending on the size of the plant, the large seedling amplitude can be larger, until the semi-lignified axillary bud).

If it doesn't work, you have to cut it off, either because it's going to absorb nutrients from the plant, but it's just going to grow a huge branch.