Where is the car water tank and where is the car water tank?

The car's water tank is on the inside under the front lid of the car. The water tank is an important component of the water-cooled engine, as an important component of the water-cooled engine heat dissipation circuit, it can absorb the heat of the cylinder block and prevent the engine from overheating due to the large specific heat capacity of the water, and the temperature does not rise very much after absorbing the heat of the cylinder block.

Therefore, the heat of the engine passes through the liquid circuit of the cooling water, and the water is used as the heat carrier for heat conduction, and then the convection heat dissipation is carried out through a large area of radiator to maintain the proper operating temperature of the engine.

There is no set time to fill a car's water tank. It is usually judged that the car water tank needs to be filled with water according to the following situation: when the car is driving, the engine cover suddenly rises from white water vapor, or the water temperature gauge pointer to the position of the high temperature "H" sign, that is, the engine temperature is too high.

It is usually due to insufficient water tank, leakage, etc. At this point, you need to add water to the tank.

The water tank is behind the front face air intake grille, and behind the water tank is the fan. The auxiliary water tank with anti-icing fluid can only be found by opening the compartment cover, and there will be water pipes connected to the water tank and the engine.

The water tank is generally behind the air conditioner condenser. When we open the engine compartment, we can only see the upper cover of the water tank, and only by disassembling the bumper surround at the front of the vehicle can we clearly see the position of the water tank. Behind the water tank is a cooling fan to increase the amount of air flow and better heat dissipation.

The water tank is generally square with a mesh structure, and the general material is aluminum alloy with good thermal conductivity.

Types of tanks.

According to the material, the water tank can be divided into: stainless steel water tank, enamel steel water tank, glass fiber reinforced plastic water tank, PE water tank, etc. Among them, the FRP water tank is made of high-quality resin as raw materials, coupled with excellent molding production technology, which has light weight, no rust, no leakage, good water quality and wide range of use.

Long service life, good thermal insulation performance, beautiful appearance, easy installation, easy cleaning and maintenance, strong adaptability and other characteristics, widely used in hotels, schools, hospitals, industrial and mining enterprises, institutions, residential buildings, office buildings, is an ideal product as public domestic water, fire water and industrial water storage facilities.

Most car radiators are installed in front of the engine and fans, except for the rear engine, which is located behind the windward grille on the front of the car.

The function of the automobile water tank is to increase the heat dissipation area and accelerate the cooling of the coolant. In order to take away the heat from the radiator as soon as possible, a fan is installed behind the radiator to work in conjunction with the radiator.

The car radiator tank is composed of the upper water chamber, the lower water chamber, the heat pipe belt and the heat sink outside the pipe belt. The water pump on the engine pumps hot water into the upper water chamber and cools it through the heat pipe belt, and the water tank is either in front of or behind the fan, because the fan dissipates heat from the water tank, so you find the water tank when you find the fan.

A car radiator is a large square or rectangular with dense aluminum or copper foil on it. The tank itself is not marked, but it is usually marked on the lid of the tank. Many of them have warning signs such as "Open carefully, burn carefully", and some have a thermometer painted with a sign of spewing vapor around it.

Some have a picture of an open book, and an exclamation mark. There are all sorts of them.

Under the front machine lid.

The coolant flows inside the radiator core and air passes through the outside of the radiator core. The hot coolant cools down due to the heat dissipated to the air, and the cold air heats up by absorbing the heat emitted by the coolant, so the radiator is a heat exchanger.

The radiator is divided into three installation methods, such as the same side in, the same side out, the different side out, the lower in and the lower out, no matter which method, the number of pipe fittings should be minimized, the more pipe fittings, not only the cost will increase, but also the hidden dangers will increase.

The water tank is a colloquial name, and the scientific name should be called the coolant radiator, which is just in front of the engine, immediately behind the windward grille on the front of the car (except for the rear engine). It is composed of an upper water chamber, a lower water chamber, a heat pipe strip and a heat sink outside the pipe band. The water pump on the engine pumps hot water into the upper water chamber, cools it through the heat pipe belt, enters the lower water chamber and then enters the engine circulation.

Generally, the addition of coolant is directly added to the water chamber, but some radiator capacity vehicles (high-end buses and flat-head trucks) also have a secondary water tank (also called expansion tank), which is a plastic cylinder, which is connected with the radiator water chamber below, and the water is added here, one is convenient to add water in the position, and the other is for the coolant thermal expansion and cold contraction buffer.

The car water tank is divided into the main water tank and the auxiliary water tank. The main tank is generally rectangular in shape with many curved aluminum sheets for heat dissipation. There is a water pipe at the upper end that is connected to the engine. The auxiliary water tank is generally near the engine, in the shape of a glue kettle, and there is a small water pipe under the kettle connected to the main water tank.

The car water tank is located in the front of the engine of the car, which is connected to the engine by the water pipe, and the hood is opened, and the water tank can be seen from the front endThe specific steps are as follows:

1. Open the door on this side of the cab.

2. Pull the hood switch on the left side of the driver's leg.

3. Lift the hood of the engine upwards.

Fourth, use the support rod to support the hood to ensure that the support is firm and avoid danger.

5. The water tank is located in the figure.

Precautions for operation:

1. Do not touch the water tank when the engine is warmed up.

2. Check whether the water tank is short of water regularly.

The water tank is generally in the air conditioner condenser.

At the back, when we open the engine compartment, we can only see the upper lid of the water tank, and only the bumper at the front of the vehicle is removed.

surrounding, we can clearly see the location of the water tank. The "water" in the car tank mainly refers to antifreeze.

The figure below is a schematic diagram of the location of the car's water tank.

The water filling port of the automobile water tank is generally located on the right side of the engine compartment, usually next to the water filling port of the wiper liquid, as shown in the figure below is the water filling position of the water tank, which we call the antifreeze tank.

Hello! I am your automotive consultant, a special guest teacher, and the cumulative service has exceeded 10,000 people.

I've seen your problem, I'm sorting out the material for you, it will take a little time to type, please wait. 

There is a water tank, the car water tank is indispensable for the car, the water tank is the main part of the car cooling system, the coolant in the water tank can absorb the heat of the cylinder block, prevent the engine from overheating to cool the car, and the effect of heat dissipation. The heat of the engine is through the liquid circuit of cooling water, which uses water as a heat carrier to conduct heat, and then dissipates heat through the heat sink in a convective way to maintain the appropriate operating temperature of the engine. The coolant is added to the car water tank, the car coolant has the functions of anti-freezing, anti-corrosion, anti-scaling, anti-boiling, etc., the coolant can not be replaced by water, because the water has limitations, it is easy to boil and produce scale, and the temperature is low in winter and easy to freeze.

Is there anything else you would like to consult? If not, please give me a thumbs up. You can also follow me. If you have anything to consult in the future, you can feel free to consult me. Have a great day, thank you.

Automobile water tank, also known as radiator, is the main component in the automobile cooling system, and its function is to dissipate heat.

The water tank is generally behind the air conditioning condenser, and when we open the engine compartment, we can only see the upper cover of the water tank, and only by disassembling the bumper at the front end of the vehicle can we clearly see the position of the water tank.

Generally, family cars are installed in the front of the car.

Generally, there is an empty condenser behind the water storage tank. When the engine compartment is opened, we can only see the upper lid of its water storage tank. Only the front end of the car is separated by a bumper, and we can clearly see where the water storage tank is.

Behind the water storage tank is a cooling fan to increase the air flow and better heat dissipation. The water storage tank is generally a square, mesh structure, and generally consists of a good thermal conductivity where is the car water tank Generally there is an empty condenser behind the water storage tank. When the engine compartment is opened, we can only see the upper lid of its water storage tank.

Only the front end of the car is separated by a bumper, and we can clearly see where the water storage tank is. Behind the water storage tank is a cooling fan to increase the air flow and better heat dissipation. The water storage tank is generally a square, mesh structure, and is generally made of aluminum alloy with good thermal conductivity.

The car radiator is inside the front cover. The water storage tank is a key component of a water-cooled engine and a key component of the cooling circuit of a water-cooled engine. Heat energy can be absorbed from the cylinder block to prevent the engine from overheating.

Due to the large specific heat capacity of water, the temperature rise after absorbing the heat energy of the cylinder is not much. Therefore, the heat energy of the engine is transferred according to the liquid circuit of the cooling water, with water as the heat carrier, and then according to the large area of fins, the heat is dissipated by convection to ensure that the engine operating temperature is moderate. There is no fixed time for the vehicle to be filled with water.

Generally, it is judged whether the car water tank needs to be filled with water according to the following conditions: when the car is driving, white water vapor suddenly appears in the hood, or when the water temperature gauge pointer quickly rises to the high temperature "H" mark position, indicating that the engine temperature is too high. Often due to lack of water, the water tank leaks.

At this time, it is necessary to add water to the water storage tank. Where is the car water tank in the car Generally, the water tank is behind the empty condenser. When the engine compartment is opened, we can only see the upper lid of the tank.

Only by removing the bumper on the front of the vehicle can we clearly see where the water tank is. Behind the tank is a cooling fan that expands the air flow for better expansion. The water tank is generally square, mesh structure, and the general material is aluminum alloy with good thermal conductivity.

The function of the water tank is to expand the area and accelerate the cooling of the coolant. In order to take away the heat output of the heat pipe heatsink as soon as possible, a fan is installed behind the heat pipe heatsink to work in tandem with the heat pipe heatsink. The water tank is composed of an upper water chamber, a lower water chamber, an enlarged pipe belt and a collapsed heat sink outside the pipe belt.

A water pump on the engine pumps hot water into the water supply chamber. Depending on the expansion pipe belt for refrigeration, the water tank is in front or behind the fan. Because the fan expands the tank, finding the fan will find the tank.

The tank is a particularly large square or rectangle with countless aluminum or copper foils on it. There is no logo on the tank itself, but there is a sign on the tank cover. Many of them are marked with warning signs such as "Open carefully, burn carefully" and some also have thermometers painted with signs of steam spewing out around them.

Some draw an open book and an exclamation point. There are all sorts. Where is the car water tank Where is the car water tank where @2019

The water tank is the main part of the cooling system and maintains the heat of the engine by circulating the coolant through the engine waterways. In winter, the air conditioner also transfers heat from the water tank to the car.

In the past, domestic large vehicles and tractors generally used water in the source cavity, and the water was easy to freeze, so in the northern winter, it was common to see drivers using fire and hot water to bake the engine in the morning. It is also easy to boil in summer.

However, today's cars are relatively delicate, and if you use water, it will corrode the sensors, engine waterways, and water pipes in the tank. Professional coolants contain chemicals such as alcohols, which reduce the freezing point of the solution and increase the boiling point, making it suitable for use in many areas. However, there are also classifications of coolant, and the coolant used in different regions is not the same.

Nowadays, cars use special coolant, and pure water can be used in a short period of emergency, but you have to immediately go to a professional car repair shop to repair the cooling system failure, and then clean the cooling system, and then add new coolant. The coolant can be replaced with two split wheel years or 20,000 kilometers. Hope.