How to remove window grilles that are stuck to the glass

1. Pick up some warm water in the basin, dip a towel in the water and keep wetting, repeatedly cover the wet for a period of time, and then use a small shovel to shovel slowly.

2. Use the hot air shield of the hair dryer to blow the window grille constantly, and it is best to use a hair dryer with no too small power to melt the glue baking heat.

3. Apply wind oil essence on the window grille, and you can slowly tear it off after a few minutes.

4. Apply alcohol or gasoline to the window grille, and then rub it on the surface repeatedly, which can be scraped with the help of a ruler.

5. Transparent nail polish, unused hand cream, face cream, can dilute and dissolve glue.

The window grille on the glass is glued, and the adhesive is self-adhesive. The ingredients are polystyrene plastic, xylene, ethyl acetate, butyl acetate, dibutyl phthalate. Over time, the organic solvent in the middle volatilizes.

The method of removal can be rubbed with organic solvents. If there is no organic solvent, find a household cool oil (which contains menthol, methyl salicylate, camphor, eucalyptus leaf oil, eugenol, liquid paraffin, etc.) and apply the cool oil to the window grille after a while, and then tear off the paste.

**There is a special self-adhesive remover**, which can be wiped off by spraying it on the window grille to be removed.

Large supermarkets may also have them.

Just tear it off, and if there is adhesive, you can spray it with which asphalt you want to remove the car adhesive and wipe it off easily.

Window grille on the glass method:

1. Prepare the window grilles and separate them one by one.

2. In the divided window grille, take out a pattern to confirm the window grille.

3. Put one side of the window grille on the tap water and dip it in water.

4. On the selected glass window, confirm the position of pasting.

5. Put the window grille on the glass first and adjust the position of the window grille.

6. Clean the other door according to the same position and prepare the window grille.

7. Paste the window grille on the door and compare the position of the two window grilles.

8. This kind of window grille is best pasted on the transparent glass on both sides, so that the pattern of the window grille can be seen on both sides.

To remove the glue left on the glass by the glue-free window grille, you need to prepare: rags, wind oil essence.

1. First of all, prepare a bottle of wind oil essence.

2. Apply the wind oil essence to the glue left on the glass by the glue-free window grille.

3. Use your hands to evenly apply the wind oil essence on the glue left on the glass by glue-free window grille.

4. Use a rag to wipe the glue remaining on the glass of the glue-free window grille.

5. Finally, remove the glue left on the glass of the glue-free window grille.

For residual self-adhesive, the use of alcohol, pine perfume, banana water, gasoline and other organic solvents should be effective (acetone, xylene is more toxic, it is best not to use), the so-called ineffective reason is because the residual colloid is basically dry, the solvent is not easy to penetrate in, so it can not be dissolved and removed.

You can use a hair dryer to heat and soften the glue first, and then rub it with solvent, which will definitely be clean.

You can buy a bottle of banana water or go to the car supply store to buy a bottle of self-adhesive remover to use, a bottle is about ten yuan.

Rub it with alcohol or acetone, and you should be able to simply take the wind oil essence.

The quickest way is to buy some thinner material and wipe it off.

Adhesive tape is widely used in today's life, but the place where the tape has been used often leaves adhesive marks, especially the adhesive marks left on the glass, which will be difficult to clean, especially the glue left by the window grilles we paste on the window, and it will affect the appearance very much if it is not clean.

1. Wipe it with a paper towel dipped in some alcohol (it is best to use industrial alcohol, or make do with medical treatment), and then rub it a few times to be clean.

2. Use acetone. Same method as above. The amount is small and thorough, and the best thing is that it removes these residual gums very quickly and easily, which is better than sprinkling sperm.

Both of these are solvents and are the most effective of all methods.

3. Use nail polish remover. The usage is the same as alcohol acetone. The effect is also very good. Nail polish remover does not require quality, good or average, as long as it can wash off the nail polish.

5. Use banana water. It is an industrial agent used to remove paint, and it is also easy to buy (where paint is sold). The method is the same as alcohol acetone.

6. You can apply wind oil essence or toilet water to the window grille, and then wait for 5 minutes to remove it.

The removal method of the window grille with glass is as follows:

1. Clean the wheel chainball.

If the sticker is too stubborn, consider using a cleaning ball. The specific method is: first moisten the sticker with hot water with a towel, soak it thoroughly, pour some detergent on the cleaning ball, and try to gently scrape the sticker.

This should be done with caution to prevent the steel wool ball from scratching the glass. Then soak it with a rag dipped in warm water, choke on the waste card, and you can basically get it. Finally, rinse clean.

2. Moisturizer.

Moisturizer moisturizes skin care, can also maintain leather products, and can also remove stickers. When you use it, just apply it to the sticker, and after wetting, you can push the sticker off.

3. Alcohol. Alcohol stickers are good, as long as you put alcohol on the stickers, they will soften quickly, and they are relatively easy to remove. However, this kind of thing is often not easy to use, and it is also relatively corrosive, if you use this method, after removing the sticker, you need to wash the glass clean.

Tips for cleaning glass

In addition to a dry and wet rag, a small plastic bag is also used to clean the glass. Spread the plastic bag between the wet and dry rags. Pin the opening side of the plastic bag together with a pin in the corner.

Such a 3-in-1 glass cleaning assistant is done.

First, the dust inside and outside the glass is dusted off with a feather duster, and then a large X-shaped shape is sprayed on the whole piece of glass with a glass cleaner. Fold the wrung out rag and wipe it along the edge of the window. Turn the cloth over and slowly wipe it inward in the same way.

After wiping the whole piece of glass, let it dry for seven minutes, and then wipe it again with a dry cloth. If it is frosted glass with patterns, it must be brushed with an old toothbrush first, then rinsed with clean water, and then wiped with a dry cloth.

How to remove glass windows: use detergent and heating equipment.

1. Use detergent

Of course, different detergents have different cleaning effects, improper use may cause glass damage, mix a large amount of hot water to dilute the detergent when using, and use soft cleaning items such as towels to wipe repeatedly to clean up the residue of general glass glue.

2. Use heating equipment

In case of too long, aging, and hardening on the glass, general cleaning does not work at all, and heating equipment and alcohol can be used to accompany the tank cleaning. Heat the glass with a product such as a hair dryer, then remove any residue from the surface of the stain, and wipe it repeatedly with alcohol until it is clean.

Introduction of window grilles

Window grilles are paper-cuts pasted on window paper or window glass, one of the ancient traditional folk arts in China. It has a long history and unique style, and is loved by people at home and abroad. The rural living geographical environment, the characteristics of agricultural production and the customs of society also make this kind of local art have distinctive Chinese folk taste and artistic characteristics.

In the past, whether it was in the north or south, window flowers were pasted in the field during the Spring Festival. Now the south is only posted when you get married, and the theme of window grilles is very extensive, and the number of opera stories is relatively large. Window grilles are more common in the north.

1. Use a hot water cloth to heat the glue on the glass, quickly dip it with single-sided tape while it is hot, and then scrape the head of the glue with a small blade to stick the single-sided tape and slowly pull it down together.

2. Use a toothbrush or pot yarn with a rag dipped in detergent to wipe along the glue circle on the glass, and at the same time put a rag under the toothbrush to prevent sewage from dripping.

3. Wipe the glue on the glass with organic solvent or industrial alcohol, or high-concentration liquor. Be careful to wipe with a rag and do not touch it directly with water.

4. Dip cotton or cloth in vinegar, and then apply the soaked cotton or cloth to the glue on the glass to cover the place where the glue on the entire glass is located.

5. Gently wipe with a rag dipped in ethyl acetate, the double-sided tape will come down immediately, quickly wipe it with a clean cloth a few times, you can use a blade to carefully scrape off the glue that has not come down, and then wipe it with polishing water or hot water, it can be completely removed.

First wipe the glass that needs to be pasted with window grilles, then soak the prepared glass grilles in water, take them out and stick them directly on the glass, adjust the position, squeeze out the water on the inside of the window grilles, and the window grilles will be firmly attached to the glass.

If the window grille cannot be fixed to the glass with clean water alone, it can be fixed with scotch tape at the corners of the window grille, so that the window grille will not fall.

Glue can also be used to secure the window grille. When operating, apply a large amount of glue on the inside of the window grille, then paste the window slip grip virtual flower on the glass glass, and finally use a dry rag to wipe the back of the window grille back and forth several times.

Ways to remove window grilles:

Blow dryer. When you haven't removed the window grille, use a hair dryer to blow on the grille for a while to increase the temperature of the grille, and you can easily remove the grille from the glass.

Steel wool balls. If there are residual glue stains on the glass, or the color of the window grille, you can squeeze a little dish soap on the household steel wool ball, and then wipe the remaining traces of the window grille vigorously, you can remove the window grille.

Alcohol. If there are still traces of window grilles on the cleaned glass, you can sprinkle a little alcohol on a dry rag and then wipe the glass back and forth several times to remove the traces.