The tiled houses in the countryside have been leaking from rain for decades, so how to renovate them

You can buy some cheaper porcelain tiles, steel tiles, spread on the roof, these tiles are not easy to break, and particularly durable, and do not need to be repaired, ** is also relatively cheap, after a long time, the color will not change too much, you can use some asphalt on the top to repair, so that the roof is more solid.

You can replace the tiles on the roof, you can pave waterproof materials, you can choose asbestos tiles, you can choose small green tiles, you can also choose color steel tiles, you can choose resin tile paving.

I think that using resin tile is the best solution now, the cost of digitalization is relatively low, and the service life is long, many people will choose resin tile.

I remember that the red brick bungalow in my house used to leak during the rainy season after the beginning of summer. If the leakage is not serious, and there is only rainwater leaking down when it rains heavily, then my family and I will prepare a few large and small pots and put them under the house to receive water. If the leakage is more serious, then you have to find a way to fix the leak.

Rural tile house leakage, at present, the more reliable and long-term method is to re-til, that is, to make new tiles, but the cost is high and the cycle is long. In this case, we generally use steel structure (color steel) to cover the frame. At least ten years of use is no problem, simple, lightweight, fast, economical.

The tile house is leaking, which is very simple, go to the house to pick up the tiles. In the past, the ridges and eaves of the tiled houses were all made of lime. Some tiles are built with lime, and in the early years, tiled houses were generally not built, and it was easy to be blown up by the wind when it was windy.

Some tiles are not of good quality, through hot weather exposure to sudden rainstorms will crack, heavy objects falling on the tiles will also cause damage, if the overall decline of the tiles has caused a "leakage" situation, this is to take all down, the wooden planks of the friendly tile are fixed again, and the new ones should be replaced with new ones. Then the sand ash is mixed and spread on top of the wooden planks, and then the tiles are fixed on the sand ash.

This is relatively simple, buy some new tiles, if you want to be durable, choose green tiles, on the contrary, choose red tiles, I personally think that green tiles are better than red tiles, durable, and then ask local masons or older generations to turn over tiles, when the tiles turn out, you can see that some tiles are broken, when covering tiles, try to cover a little dense to buy some new tiles, and find the master of the tiles to cover once, and the place where there is a crack in the ridge can be used cement mortar.

Coated cover. If you are not at ease, wait for the cement mortar to dry before applying waterproof coating.

Just in case! Thank you for the invitation, it is purely personal experience, please advise me if there are shortcomings!!

Rain leakage, then you have to ask a professional to repair it, I also have experience in this area, according to the leakage area of the roof, buy some asphalt and linoleum.

Clean the room surface, when the asphalt is heated into a dilution, brush it on the leaky part of the room, and the linoleum is heated and pasted on the asphalt water! If you don't understand, you have to hire a professional.

Change the tiles. Because the old tiled house leaks rain, it is generally caused by the cracking of the tiles, so the cracked old tiles should be replaced.

These tiles should be lifted, then plugged with cement where the rain leaks in the home, and finally let the tiles be covered, so that there will be no rain leaks, especially in the summer.

For new ones, some of them are indeed broken, so you need to replace them and replace them with new ones, so that you can avoid rain leaks to a large extent.

To fill the leakage of the tile house, you can only find a relatively complete tile coverage hole. The method is relatively simple, and the operation is very convenient.

Find out the root cause of the water leak and find the water seepage point for repair. According to the correct construction process, repair the large leakage first, and then repair the small leakage; Fix the water leakage at the high place first, and then repair the water leakage at the low place; Fix the wall leak first, then the floor leak. Avoid the practice of "headache treatment".

Otherwise, only part of the leakage point is repaired, and the real leak point is not found, so as to enter the multi-point leak repair state.

For the repair of water leakage in the house, we should start from the original leakage problem, fundamentally propose a solution, investigate the situation of the leakage point: the size, degree and distribution of the leakage point, analyze the cause of the crack, and then select the corresponding waterproof material for construction and repair. Do not use waterproof materials that are incompatible with the waterproofing layer.

Many people think that waterproofing coatings are similar, but they don't know that there is also "repulsion" between waterproofing materials. If the repair coating does not combine well with the waterproofing layer, the desired waterproofing effect cannot be achieved.

Even if the leak is repaired, a secondary leak will occur. Therefore, it is important to choose a material that is compatible with the original waterproofing layer and has good waterproof properties before repairing the water leak. First of all, we must find out the cause of the water leak so that we can solve the problem of water leakage at the root.

There are many reasons for a water leak. For example, the poor quality of the waterproofing layer and the poor sealing of the floor tiles can lead to water leakage. Corresponding maintenance measures should be taken according to different water leakage factors.

Due to the leakage caused by the poor quality of the waterproofing layer, we had to break all the floor tiles, find the original waterproofing layer, clean and dispose of the base layer.

If there is no leakage downstairs, the waterproofing is qualified, and the floor tiles are restored at the end. Unreasonable design scheme, unqualified maintenance materials, inadequate construction technology, and unconscious maintenance in the later stage are the main reasons for roof leakage. The non-professional construction team lacks professional technology, and there are loopholes in the construction plan provided.

In addition, without formal training, it cannot handle the detail nodes, which makes the waterproofing effect not last long. After the construction is completed, it often leaks again. Regardless of the leak in **, it can be summed up in one sentence:

The devil is in the details.

If the rain leakage of the tiled house in the countryside is more serious, it can be suggested to re-lay the glazed tiles. Nowadays, there are many waterproof building materials, which are relatively low cost and can be repaired.

The cheapest** way is to put a tarp on the roof of a tiled house to cut off rainwater so that there will be no more rain leaks in the house.

I think you can lay a layer of color steel plate on the roof, which is not only leak-proof, but also cheap.

The design of the tiles has been tested in ancient practice and is not leakable. Although the waterproof performance of the tile house is one level higher than that of the current high-rise buildings, in ancient times, the tile house was very popular, which also proves that the waterproof performance of the tile is still very good. The design of the tiles is the practice of stacking one tile on top of another, the shape of the tile itself is a concave shape, this design is to facilitate drainage, when the tile is used to cover the house, the workers will stack the tiles one by one, and the end of each tile is connected to the other tile, so as to prevent rainwater from flowing into the room through the gaps.

Because the tiles are placed on top of each other, and the roof is designed to be sloping, when it rains, the rainwater will flow down the tiles without leaking. Of course, the premise that there will be no water leakage is that the tiles on the house are tightly connected. But in fact, such a state was a very ideal situation in ancient times, and the houses of the ancients generally needed to be turned over frequently and checked to ensure that the house would not leak.

Although the design of the tile is very novel and practical, because the tile has been used for a long time, it will gradually dry out after a long time of wind and sun, so it is very necessary to investigate.

In addition, in ancient times, because of the many forests, the houses of the ancients were generally close to the mountains and rivers, so the tiles on the roof were often blown open by the wind, leaving gaps. At this time, in order to prevent rain leakage in the house during rainy days, the ancients had to go to the house to uncover the tiles. However, the work of uncovering the roof still needs some young laborers to do, after all, the house is still very high, and it is easy to flash to the waist or fall from a high place if you are not careful.

Therefore, for families who do not have young adults at home, it is still very difficult to renovate the tiles, and sometimes it is easy to leak rain when the wind is strong. At this time, the ancients would put a wooden basin in the leaky place of the home to prevent the leaking water from spreading to the orange trembling other parts of the home.

There can be special glue for roof repair, the specific operation is as follows:

1. First of all, clean the construction surface with a brush, find the cracks and leakage points, and clean them to ensure that the construction surface is clean and dry.

2. Then place it in the construction place with waterproof tape, compare and cut, and relax the length appropriately.

3. Then tear off the protective film on the back of the waterproof tape and stick the waterproof tape on the crack.

4. Then quickly press the waterproof tape by hand to make the tape reach a strong sticking force.

5. The glue strength of this special roof repair adhesive is very strong, as can be seen in the figure below.

How to repair the leakage of the tiled house?

If the weather is good, find a bricklayer to repair it.

First of all, look at the size of the rain leakage to choose the amount of material (it is best to find the same tile).

How to patch:

1. Tile roofs are usually easy to repair. But it's hard to pinpoint what's missing. In every two tiles, joints, around each chimney or vent, check whether there are cracks, and remove the corresponding tiles.

2. Carefully remove the old tiles and slide the new tiles to the appropriate position, use a sharp multi-functional knife or tile repair tool, and repair the tile to the appropriate size.

3. Touch it with cement, sand or mud and cover it with tiles. (Linoleum paper, asphalt and other auxiliary materials are also good).

Note: 1. Generally speaking, the tile house is herringbone, so during construction, it should be operated in line with the principle of bottom-up and inside-out;

Latest CPC Waterproof Leak Fix:

The steps to fill the leak with the CPC roof: it is very simple, first clean the ground, wait for the ground to be completely dry, and then apply the CPC leak prevention agent evenly until the ground is completely dry. From the construction point of view, the CPC waterproof leakage repair technology is convenient and desirable.

I think that the first thing to know is that the tile is broken, and under what circumstances does it leak, it leaks when it rains, but it leaks when it rains and rains, and when it rains heavily. If it rains lightly and the whole house leaks, then it will have to be repaired and the entire roof will be scalded (cover the whole surface with asphalt and rainproof cloth). If it's rainy, it's probably rain going up from the cracks in the tiles.

It's simple.

Step 1: Find the leakage point and uncover the corresponding tile.

2. Fill the leak (linoleum paper, asphalt and other auxiliary materials are required).

3. Cover the tiles.

Note: 1. Generally speaking, the tile house is herringbone, so during construction, it should be operated in line with the principle of bottom-up and inside-out;

2. Stay safe!

Dear, I am glad to answer for you the easiest way to leak rain in rural tiled houses is as follows: first, find the place where the tiled house is leaking, and uncover the corresponding tiles, and then regret the spring to see if it is broken. Then carefully remove the old tile, slide the new tile to the appropriate position, and then use a sharp multi-function knife or tile repair tool to repair the tile to the right size.

Finally, apply cement, sand or mud to the leaky area, then do it all over the waterproofing, and cover it with tiles.

The easiest way to leak rain in a rural tile house: renovate and renovate.

1. Renovation

If the tile has been used for many years, you can consider directly replacing the new tile, if only part of the area is loose in the case of water leakage, you can disassemble the original tile and then lay a layer of waterproof material in it, must be comprehensively inspected, can not miss a place, so as to completely solve the problem of leakage in the tile house.

Here we must pay attention to the fact that before the construction of the waterproof leakage, the roof must be kept dry, because the moisture of the roof will not evaporate, the new waterproof layer will be jacked up, and the waterproof effect will be invalid immediately. Therefore, it is not suitable to carry out construction on rainy days, and it is necessary to wait until the sun dries the moisture before construction.

2. Leakage

There are two main causes of tiled roof leakage, one is the leakage of the tiled roof, and the other is the leakage of the roof of the bungalow. Among them, the most common leakage of the roof of a tiled house is due to the erosion of the tiles after years of wind and frost.

In this case, it is only necessary to clean up the aging and broken tiles and moss on them, and replace them with new tiles. This method is also called "leakage".

Causes of roof leakage

1. Damaged roofing materials: Poor workmanship, strong winds and hail or substandard materials during roof installation will damage the integrity of the roof. During a storm, roof tiles can be blown into unsuitable places, causing water leakage.

2. Perforated roof: Perforated roof valley can cause roof leakage. Accidental damage can occur to valley metal roofing tiles during maintenance. Lack of maintenance on the roof can also lead to a buildup of debris, which can eventually lead to leakage, decay, and water accumulation, which can become a breeding ground for black mold.

3. Inferior materials or installation: Poor craftsmanship is the main cause of roof leakage. Failure to install the right materials during the construction of a house can lead to leaks around roof membranes, roof vents, roof flashing panels, and chimneys.