How to fix scratches on the surface of Omega, how to open the back cover of an Omega watch with scra

Mild ones can be repaired with basic polishing and sanding, but deep scratches require more elaborate repair processes. As the process of the surface of the case, there are basically two kinds: polishing and sanding, or both, grinding the scratches on the watch case, but also according to the original process, a large area of hair wear is easier to do; However, if there are deep hard scratches, it will be more troublesome, because neither polishing nor sanding techniques are enough to polish away such scratches.

Partial deep scratches on the case or strap should be polished with oil stones first. This needs to be carried out under a magnifying glass, the purpose is to evenly smooth the scratches, when the scratches are basically ground to be smoothed, choose sandpaper with the right particle size, and grind along the original sanding pattern, usually this line is radial with the dial as the center, so this is a careful work, to a little bit, the grinding effect will be good and realistic. It is recommended to use the kind of sandpaper used in the jewelry industry, preferably imported, such as German Warrior brand water sandpaper.

Hand-held tools are also particular, it is recommended to use a hemostat on the surgical operation, only take a small piece of sandpaper, fold it in half and clamp it with a hemostat, parallel to the original texture to do sanding, sapphire glass is relatively hard, you can not consider it, but the shell of the watch is stainless steel, you must pay attention to it when operating, do not scratch it, if necessary, you can cover it with adhesive tape. On the technical side, it is necessary that all the sand patterns go all the way around, and they all start from the center of the dial and are radial. All scratches on the watch case and strap can be removed in this way if you want to remove it or renovate the appearance of the watch.

The straight-line shape of the pattern is easier to do, if the pattern is concentric, then it should still be done by using electric machinery. For the case and strap with sand-drawn and polishing process, the sand-drawn sanding should be done first, and then the polishing and polishing should be done when trimming, but it is necessary to cover the sand-drawn parts that have been trimmed.

When there are scratches or slight scratches on the mirror surface of the OMJ watch, you can first drop one or two drops of water on the watch mirror, then squeeze a little toothpaste, and then wipe it back and forth with a cotton ball to remove the scratches and make the glass as new.

As the process of the surface of the case, there are basically two kinds: polishing and sanding, or both, grinding the scratches on the watch case, but also according to the original process, a large area of hair wear is easier to do; However, if there are deep hard scratches, it will be more troublesome, because neither polishing nor sanding techniques are enough to polish away such scratches.

Hello, glad to answer for you!

How to repair the mirror surface of the watch:

If there are scratches or slight scratches on the mirror surface of the watch, you can drop one or two drops of water on the mirror first, then squeeze a little toothpaste to wipe it, and then wipe it back and forth with a cotton ball, you can remove the scratches and make the mirror as new. (It is not recommended to repair in this way, it is recommended to go to a professional maintenance center for repair!) ）

Hello, glad to answer for you!

If the watch is scratched, it can be done by grinding, wearing, and polishing the worn watch to look brand new. If there is a serious bump that causes hard injuries, smashes and dents, the repair process is relatively complicated, and you need to bring the watch to a professional watch repair center for repair.

It is recommended that you can open the warranty coupon attached to the purchase of the watch, under normal circumstances, there will be a service address on the warranty copy, or find a regular watch service center for testing and maintenance of the address of the store, etc., if there is a professional after-sales maintenance center nearby.

1. The first thing is to stop the watch. Pull out the watch handle and stop the ZD of the watch. Pulling out the handle allows the watch to stop, preventing the hands from scratching the dial and date by driving glass shards.

2. Never pull out the needle and the fast-setting calendar, and you must not try to remove the broken glass of the dial by yourself.

3. When returning to the watch shop, the watch should be placed flat (preferably with the glass facing down) into the box, and no violent vibration and shaking should be generated during the repair.

4. During the maintenance process, you need to tell the maintenance personnel not to let the glass fragments scratch the dial and watch hands.

Summary. Hello, if you have a scratch on the back cover of your Omega watch, there are some tools you can use to open it. First of all, you need to use a special watch back opener, which can help you open the watch back easily.

If there is a scratch on the back cover of the watch, you can use some abrasive cloth or grinder to fix it. You need to use these tools carefully to avoid further damage to your watch

Hello dear Probably due to the fact that it was then laid flat on the table and the bracelet was scraped underneath.

The newly bought watch has a membrane, and after tearing off the membrane, the watch bracelet and the back cover are scraped against each other when they are laid flat.

Hello, if you have a scratch on the back cover of your Omega watch, there are some tools you can use to open it. First of all, you need to use a special watch back opener, which can help you open the watch back easily. If there is a scratch on the back cover of the watch, you can use some abrasive cloth or grinder to fix it.

You need to use these tools carefully to avoid further damage to your watch

Hello Dear Hello is a pleasure to serve you according to your questions. 1. If the back cover of your Omega watch is scratched, it is recommended to clean the case with some stain remover or detergent before using a professional case opener to open the back cover. 2. If you don't have professional tools, you can go to a professional watch repair shop or an official Omega repair point for repair.

3. It is not recommended to use non-professional tools or methods to open the back cover of the watch to avoid unnecessary damage. 4. At the same time, it should be noted that any unofficial repairs or alterations may cause the warranty of the watch to be voided.