How to clean an Omega mechanical watch, where to repair the Omega watch

Omega watches are one of the most counterfeited Swiss watches, and the highest level of counterfeiting of all the watches I've seen. Is there an easy way to distinguish an authentic Omega watch?

How can you tell if an OMEGA mechanical watch is authentic from its appearance? Generally speaking, Omega mechanical watches should be carefully read the following points when purchasing, so as to avoid buying fakes or defective products of poor quality. After the sound of the Omega mechanical watch is fully wound, listen to the sound with your ear, which should be clear and symmetrical without noise, and do not change with the change of direction.

From the appearance of the Omega mechanical watch, the shell, face and needle of the Omega mechanical watch should be visually inspected, without "trachoma" and scratches, the plating should be bright, there should be no color difference, and the screw-down of the back cover should be tight. Hand dial from an Omega mechanical watch.

The hands of the Omega mechanical watch are comfortable to use in the hand, and they are not good if they are too tight or too loose. The hours and minutes of the Omega watch should be coordinated with the hours, minutes and seconds without touching each other. From the Omega mechanical watch to the Omega mechanical watch when the bracelet is easy to feel, no noise.

Except for the slippage phenomenon after the upper bar of the automatic watch is full, the mainspring of the Tissot watch should generally be able to be loaded on the foot without slipping. Starting Performance from an Omega Mechanical WatchThe Omega mechanical watch slowly rotates the upper stem and winds it while observing the second hand, and generally the fewer times the upper bar rotates so that the second hand starts, the better the starting performance of the omega.

After-sales**Omega watch after-sales maintenance center.

What are the maintenance methods for Omega watches?

For the cleaning and maintenance of the watch, if you choose a general watch cleaning tool, the general watch tools include a watch brush and a special cleaning solution for the watch. It is very simple to clean with ordinary tools, and the cleaning fluid used is No. 120 aviation gasoline. Because gasoline contains a certain amount of impurities, it is best to filter it with filter paper when using 120 gasoline to remove impurities.

Otherwise, the parts cleaned with unfiltered gasoline will have a layer of hoarfrost on the surface, and the cleaned parts must be blown dry. If there is too much or dirty sludge in the movement section, it should be soaked in the cylinder for a while. If necessary, use a brush to remove dirt from the watch or a willow stick to remove the sludge, then put it in clean gasoline to clean.

All in all, the movement part should be cleaned and not negligent.

Watch cleaning methods include toothpaste cleaning, soapy water cleaning, alcohol cleaning, vinegar and toilet water cleaning, etc.

1. Toothpaste cleaning.

The bracelet is the most dirty part of the whole watch, soak the bracelet in hot water with detergent for about 15 minutes. According to the principle of heat expansion and cold contraction, the gap between the joints will open by itself, so use a toothbrush to dip a small amount of toothpaste, gently brush the watch chain section by section, and brush it all.

2. Wash with soap and water.

If the strap smells, you can prepare your own soapy water, and then use a toothbrush dipped in soapy water to scrub it, so that you can remove the odor, and wipe the soapy water with a dry cloth after brushing.

3. Alcohol cleaning.

If it is a leather strap, you can spray alcohol on the strap and then wipe it with beeswax, which can not only clean the strap, but also play a role in sterilization, mildew and moisture.

4. Vinegar and toilet water cleaning.

For the strap with a particularly strong odor, you can use a towel dipped in toilet water to wipe the strap and soak it in vinegar before cleaning.

1. When wearing a watch, the sweat on the hands is corrosive to the case, the all-steel case is nickel-chromium alloy, the corrosion resistance is better, the semi-steel case is copper, long-term contact with sweat, easy to corrode, should often wipe off the sweat with a soft cloth or pad the plastic watch holder to prevent it from being eroded by sweat.

2. Do not open the back cover of the watch at will, so as not to enter the movement and affect the normal operation of the watch.

3. Do not put the watch in the wardrobe with mothballs to avoid the deterioration of the watch oil.

4. Watches that are not worn for a long time should be wound regularly once a month, and watches with automatic movements should be gently swung back and forth for a few minutes or worn on the wrist for a period of time to make them automatically wind. The parts will not be in a stationary state for a long time to ensure the running performance of the watch machine.

Omega watch maintenance and repair places are: Beijing Jingshi Hengda Watch ****, Fujian Four Seasons Tianbao Watch Co., Ltd., Shanghai Wanheng Watch Repair Center, Xiamen MixC Watch After-sales Maintenance Center, Suzhou Deruiheng Watch Repair Center, detailed as follows:

1. Beijing Jingshi Hengda Clock ****:

It is a modern service-oriented enterprise focusing on watch repair. After more than 10 years of development, the company has more than 100 professional national chain watch repair and after-sales service centers in North China, East China and South China. At the same time, it is also the designated repair network for Patek Philippe, Vacheron Constantin, Audemars Piguet, Breguet, IWC, Piaget, Cartier, Jaeger-LeCoultre, Rolex, Girard-Perregaux, Blancpain, Chopard, Omega and other world-famous watches.

2. Fujian Four Seasons Tianbao Watch Co., Ltd. ****:

Founded in 2001, the company focuses on the operation of various brand watches, with 15 watch stores and 4 watch service centers, which are distributed in major shopping plazas and shopping malls in various regions of Fujian Province.

3. Shanghai Wanheng Watch Repair Center:

As a large-scale luxury watch sales and repair company, Hengdeli International Watch Repair Center specializes in the repair of Patek Philippe, Vacheron Constantin, IWC, Audemars Piguet, Piaget, Breguet, Zenith, Glashütte, Rolex, Tudor, Omega, Chopard, Longines and other world high-end brand watches, as well as antique clocks and customized high-end straps, and can provide regular maintenance for your watch. Your watch is here to be repaired transparently on site, and it is immediately desirable.

4. Xiamen MixC Watch After-sales Maintenance Center:

Stationed in Xiamen City, Fujian Province, with high-quality national chain watch maintenance brand stationed in Xiamen China Resources Mixc Shopping Center, China Beijing directly under the professional brand after-sales maintenance center, professional after-sales maintenance brands such as Patek Philippe, Vacheron Constantin, Omega, Montblanc, Longines, Radar and other world famous watches, and can be for famous watches on-site maintenance, repair.

5. Suzhou Deruiheng Watch Repair Center:

Founded in 2001, it is a modern large-scale service-oriented enterprise focusing on watch maintenance. There are maintenance service centers in large and medium-sized cities across the country, forming a huge watch after-sales maintenance service network to provide consumers with convenient and fast watch maintenance services. Honors:

It is the designated cooperative unit of China Watch Association, the partner of the Watch Products Testing Center of the China Federation of Commerce, and the special maintenance service organization of Swiss brands.

1. The watch glass, hands, dial, handle, gasket and other parts of the watch should not be washed in clean water, but should be placed in the professional watch cleaning liquid, because water will rust the watch parts.

2. If there is dust or fiber on the watch glass, you can blow it off with a dust collector, if it is not bright, you can put some toothpaste on the velvet, clean the watch oil stain and gently wipe it to make the watch glass clean and bright.

3. If the watch hand is not clean, you can use a flannel cloth to gently wipe the surface of the watch hand, and the watch hand can be as bright as a celebration. Because there is a sealing gasket in the shank, the watch can only be removed with a willow stick, and then the handle shaft can be used with flannel.

4. The sealing gasket should be removed when cleaning the case, and then brushed with a dry brush. If there is dust on the dial surface, you can use a soft brush to gently brush it to remove the dust.

5. Use the famous lead and blue gasoline cylinder to clean the watch, the gasoline cylinder is an indispensable tool for cleaning the watch, and the function of using the gasoline cylinder to clean the watch is to hold the cleaning liquid to wash the watch machine.

After-sales**Omega watch after-sales maintenance center.

Maintain the watch, case and strap of your Omega watch.

1.Sapphire glass, tungsten titanium alloy, and high-grade ceramics are wear-resistant materials, but despite their abrasion resistance, they are not fragile and cannot withstand strong impacts. After all, this does not mean that hardness is invincible.

At the same time, some materials of the same or higher hardness may damage these materials. Abrasives, sandpaper, nail markings, granite surfaces, concrete walls, and floors all contain the above substances that can scratch the surface of these substances.

2. Webbing, K gold, platinum straps and cases will be affected by vibration or improper contact, and are easy to scratch, so water, air corrosion, human sweat, etc. may cause different degrees of damage to life. First, extend the life of the company by wiping off the moisture with a sturdy cloth that absorbs it, and making it ventilated, dry, cleaned frequently, and shiny.

Omega has four series: Constellation, Seahorse, Speedmaster, and De Fei, according to different materials, the cleaning cost is different, the ** of ordinary material cleaning is 770 yuan, and the gold watch needs more than 800 yuan. According to the relevant regulations of the watch industry, an inspection fee of 1/1000 is also charged according to the ** of Omega watches. Normally worn Omega watches can be cleaned every 2-3 years.

The Omega strap has been incorrect for a period of time, largely due to the influence of magnetic fields. Household appliances such as computers, televisions, refrigerators, etc., will generate magnetic fields, and the magnetic buckles of wallets and handbags will cause magnetization of watches. Therefore, in daily wear, stay away from strong magnetic fields as much as possible.

Although the watch has a waterproof function, it is not allowed to wear the watch into a place with more steam, such as a sauna, the heat and temperature difference of the steam will cause the watch waterproof rubber ring to age in advance, lose the waterproof function, and cannot protect the movement normally.

It's not free, it's best to have your OMEGA automatic watch cleaned every 5 years.

This is a paid item.

Generally speaking, mechanical watches should be maintained at least once every 2 to 3 years, and when maintaining, all parts of the watch should be disassembled, the movement should be wiped with gasoline, and then other equipment in the watch should be cleaned by professional equipment, and finally oiled and assembled.

Cosmetics containing chemicals such as seawater, salt water baths, perfumes, shampoos, nail polish polishes, nail polish removers, etc., will corrode the gold plating and metal surface of the watch, so avoid contact with it.

The following operations are included in the watch comprehensive maintenance and repair program:

1.The movement is completely disassembled, cleaned, oiled, reassembled, adjusted, and functional;

2.repair or replacement of any worn or malfunctioning movement components;

Watch maintenance. 3.Replacement of the following parts: the crystal, crown, pushers, seals and batteries of the quartz movement (those included in the service price list, excluding specially shaped mineral glass and sapphire crystal);

4.Restore water resistance (in the case of a water-resistant model);

5.Refurbished case or bracelet (two-tone, gold-plated and PVD-plated case and bracelet, wash only).

Hello, glad to answer for you!

How to care for your watch:

1. Avoid scratches.

2. It is forbidden to bump.

3. Do a good job of waterproofing.

4. Replace the battery in time.

5. Pay attention to the use temperature and keep away from the magnetic field.

6. The mechanical watch is wound every week.

Omega Watch Care:

1. What should I do if the buckle is deformed?

The deformation of the buckle not only affects the comfort of use, but also affects the wearing safety of the watch. After the buckle is deformed, it should be sent for repair as soon as possible. Metal straps are divided into solid and hollow cores, and the straps of high-end watches are made of solid cores, and the quality of hollow cores is relatively poor.

2What should I do if the watch is broken?

If the watch buckle is broken, you don't need to replace the entire strap, just replace the buckle. The replacement of the clasp requires a visit to a professional Blancpain repair point, which ensures the quality of the clasp and allows for a wider range of options.

Maintenance method of mechanical watch:

1.If it is a manual mechanical watch, the mechanical watch should be wound regularly, and it is recommended to wind the mechanical watch around 8 pm.

2.Automatic watches, such as insufficient arm movement, need to manually wind the watch, and the rotation of the crown needs to be controlled within 20 turns.

3.If an automatic watch has not been worn for more than 40 hours, it is necessary to turn the crown twenty times to activate the movement's drive system.

4.Regardless of the water resistance of the watch, it should be avoided as much as possible, and if it does, wipe it dry and make sure that the crown is locked at all times. It is best to replace the waterproof ring once a year.