-
Use 150 grams of miscanthus nitrate (also known as Yuanming powder), 150 grams of salt and 2500 grams of cold water to make a solution. Spread the fur board upwards on the board, spray it with cold water first, dip it in the prepared solution with a brush, and brush it every 2 hours until the skin board is fully soaked in the solution, then dry, and gently rub the fur with your hands, it will change from hard to soft.
-
If you want to repair a mink coat that is not particularly deformed at home, you can sprinkle some hot water on the back, lay it flat and dry, try to straighten it with your hands, and after drying, iron it with an iron and remember to master the temperature and strength, it should be able to restore its original appearance.
-
Brush the hardened part of the leather board with hot soapy water or laundry water, let it stand for half an hour, and then gently rub it with your hands to fully soften the leather board.
-
Keep it clean. Wearing a mink coat should be kept as clean as possible, and it should not be worn in snow or rain. If the fur is unintentionally wet or stained, it must be disposed of in time, wiped off with a dry cloth, and then placed in a dry and ventilated place to dry.
If there is usually dust and dirt on the clothing, it should be dusted off in time, and the dirt should be wiped in the direction of the hair with a hot towel to avoid contamination of the fur.
-
If the mink sweater clothes become hard, it is recommended to send them to a professional laundry shop for maintenance. If the wool fabric is dirty, it must be cleaned immediately to avoid leaving marks. The longer the stain stays on it, the less likely it is to be washed off; In addition, if the stain penetrates into the fiber over time, it will inevitably rub hard when cleaning, which will more likely cause damage to the clothing.
-
This is achieved with salt and alum water (5 grams of salt and 10 grams of alum in 500 grams of water). Moisten the leather board, dry it and rub it evenly to restore its softness.
-
Mink skin will generally harden when exposed to water or heat, you can brush the hard part of the leather plate with hot soapy water or laundry detergent water and let it stand for half an hour, gently rub it with your hands, and it will slowly soften.
-
Wearing a mink coat should be kept as clean as possible, and it should not be worn in snow or rain. If you inadvertently get wet or stained, you must deal with it promptly, shake off the water droplets from the hair needle, and then hang it in a well-ventilated room. Do not place it in an excessively hot place, such as near a heater.
As this will dry out the fur and leather surfaces of the fur. After the fur has dried, shake it again.
-
Then this mink is to say, well, the surface is very dirty, if you want it to be partially soft, it is in winter, when it snows, you put it on the clean snow, gently knock it with a stick, it will have an effect.
-
Opi is better at home, you don't have to be at all, you have to go to a regular store to help you recover.
-
The solution was made with 150 grams of miscanthus nitrate, 150 grams of salt and 2500 grams of cold water. Dip a brush in the prepared solution, apply every 2 hours until the skin plate is fully soaked with the solution, then dry, and gently rub the fur with your hands to soften.
-
You can sprinkle some hot water on the back, lay it flat to dry, try to straighten it with your hands, and after drying, iron it with an iron and remember to master the temperature and strength, it should be able to return to its original appearance.
-
Summary. Mink is inherently tough, so to make it soft, some special measures need to be taken. 1. Use the soaking method:
Soak the mink in warm water for 5-10 minutes, then take it out and wipe it with a towel to let the water evaporate fully, and then gently wipe it with a cotton cloth or soft cloth to achieve a better effect.
Mink is inherently tough, so in order to make it soft, you need to take some special measures before you can get rid of it. 1. Use the soaking method: soak the mink in warm water for 5-10 minutes, then take it out and wipe it with a towel to let the water fully evaporate, and then gently wipe it with a cotton cloth or soft mold cherry cloth to achieve the best effect.
Fellow, I really didn't understand, I can be more specific.
2. Use the thick paste method: find a thick blanket to wrap the mink and put it in the sun to dry for a period of time, so that the mink will become soft and blind. 3. Use the friction method:
Find a soft cloth, put the mink blind lead skin on it, and gently rub it with a soft cloth to increase the elasticity of the mink and make it soft.
-
If the fur is washed directly in water, it will cause the skin to harden and shrink. If your mink is hard and shrinking due to water, come to Waltai, Waltai's professional fur care center, ordinary dry cleaners use petroleum and perchloroethylene solution, which is harmful to the fur, so there is not enough knowledge and conditions in fur care, please go to a special fur care store. Shenyang Fujin Huatai Fur not only gives you peace of mind but also saves time and effort.
If you have any needs, you can call ** at any time to consult, you can also chat with us, all over the country can be mailed, we will serve you wholeheartedly!
-
Summary. Hello, glad your question answered below.
Guangrui fur professional master said that the fur like mink fur usually only needs to be gently wiped with a cotton towel moistened with water, and then used a soft brush to dry it after the brush is ventilated and dried (can not be exposed to the sun), can not be dried or dried with a hair dryer, and when it is about to dry, it can be brushed lightly with a soft brush or wooden comb.
If you want to repair the mink that is not particularly badly deformed, you can use a household mink softener to spray it on the leather surface to soften, lay it flat, and try to straighten it with your hands. After the shape is dried, remember to master the strength of the degree, and you can return to the original appearance.
However, if the perm shrinkage and hardening are more severe, this method will not work, so do not try to avoid damage again. You can go to the manufacturer's professional technical master fur care company for special treatment.
Hello, I'm glad that your question is answered as follows Guangrui Fur Professional master said, like mink fur, usually only need to use a slightly moistened cotton towel to gently wipe the hair, and then use a soft brush to brush the hair after ventilation and drying (can not be exposed to the sun), can not be dried or dried with a hair dryer, when it is about to dry, use a soft brush or wooden comb to brush lightly. If you want to repair the mink that is not particularly seriously deformed, you can use the household mink softener liquid Li Zheng to soften it on the leather surface, spread it flat, and try to straighten it with your hands. After the shape is dried, it is necessary to master the strength of the good degree, and it can be restored to its original appearance.
However, if the perm shrinkage and hardening are more severe, this method will not work, so do not try to avoid damage again. You can go to the manufacturer's professional technical master fur care company for special treatment.
-
Hello, I am inquiring for you here, please wait a while, I will reply to you immediately When wearing mink, be careful not to touch salt, alkali, acid, oil, especially hair dye, perfume, etc
The use of self-heating claypot rice is as follows:1. First of all, self-heating rice. >>>More
1. When starting, put the gear on the P gear or N gear, then step on the brake and start the car. The gear is placed on other gears, and now the vast majority of cars, you can't start the car, which is the protection mechanism of the car to prevent the vehicle from suddenly running forward or backward by starting by mistake. >>>More
The lifting method is not the same, the algorithm is not the same, generally according to the principle of moment balance, pay attention to check the lifting to the maximum angle when the goods are not unloaded.
Enter the area and get the decoration for free**].
There are many waterproof materials, and the more common one is a self-adhesive waterproof membrane, which is relatively simple in construction and has a wide range of applications. So what are the specific steps of self-adhesive waterproofing membrane construction? What problems need to be paid attention to when this kind of coil is constructed? >>>More
Backup Contact: Select the contacts in the menu - Application - File Management - Backup - Backup Content to back up immediately. In addition, the software that comes with the machine cannot be exported (except for those solidified in the system), as long as there is a software installer and reinstall it again. >>>More