The manual automatic start step is correct, and the manual automatic operation sequence

1. When starting, put the gear on the P gear or N gear, then step on the brake and start the car. The gear is placed on other gears, and now the vast majority of cars, you can't start the car, which is the protection mechanism of the car to prevent the vehicle from suddenly running forward or backward by starting by mistake.

2. When the vehicle starts, step on the brakes and hang into D gear, and then slowly release the clutch, and then refuel the throttle after the vehicle walks out of a few meters. On smooth roads, you can always hang D gear to move forward, and try to avoid slamming on the accelerator, otherwise it will increase excessive fuel consumption.

3. When encountering a climbing road, try to change to a climbing gear, which not only has a strong power output, but also avoids the hard operation of the engine.

4. The manual automatic gearbox is very useful in traffic jams, because if it is only hung in D gear, traffic jams go and stop, the gears will automatically switch back and forth between gears, which will inevitably aggravate the wear and tear of the gearbox, so in the road conditions of traffic jams, it should be changed to manual gear in time, if the speed is about 20 kilometers, you can hang the gear in 2nd gear; More than 30 kilometers are hung in 3rd gear.

5. When driving in automatic transmission, when encountering a downhill road section, do not hang into N gear. Most drivers think that this is fuel-efficient, but in fact, this will only lead to a reduction in the amount of lubricating oil by the oil pump, and even burn out the gearbox.

6. When the vehicle is parked, it is best to put the car gear in the P gear and turn off the ignition and pull out the key. In this way, the gearbox can be protected, and in addition, when parking on uneven roads, the handbrake should be tightened and then turned off, otherwise the vehicle will have a little forward or backward after the ignition is turned off, which will form an impact on the gears of the gearbox and damage the gearbox.

The automatic manual transmission is a transmission method that combines the manual shift and automatic shift of the car, which is a kind of automatic transmission. Its biggest feature is that it combines the advantages of automatic transmission and manual transmission, which is the most convenient to operate while giving the driver freedom, so that the driver can freely choose his own suitable gear and shift time, thus greatly improving the driving pleasure.

Hand self-integration, correct start steps, hand self-integration, correct start steps, the hand brake should be turned off in front of the car, pull it down and then use the key to start the car.

The easiest starting step is to ignite directly, and then you can directly use the manual transmission if you want to, and you can break it to the right if you want to.

To start the step correctly from the one, first of all, you should put some advanced directions and use a hand difference. Then you can filter it with a high-grade machine.

If you start correctly together for the first time, you can also put your gear in neutral and activate the key door.

Under normal circumstances, we are generally accustomed to using the manual start method first, and then switch to the automatic mode after the operation is stable.

For a car with a manual automatic, we were at the normal start. The automatic mode is selected first. After the car is running, we can push it into manual mode.

The correct start step of the first one, if you use the automatic word to hang directly to the ground, if you want to collect yourself, you can hang directly to the m.

In this way, the car needs to be put in P gear when starting normally.

Write it down and you can start it by following the normal operating process.

Start correctly together without doing the hand in the book, and do more than one step of the correct solution is to step on the brake start button, or if you can open it.

If the simplest step is to start correctly, then you can press it, and it will be able to start on its own after this start.

The all-in-one machine has a red power button switch, double click its part, and the system interface can appear.

The correct way to start the hand is to use the hand and the computer at the same time.

There's really no right step for this, you just have to follow the process, it's very fast.

The correct step of hand self-integration, the first step of hand self-integration should be to make strokes first, and then write the main topic.

How to open the hand automatically? Teach you how to drive a self-contained car in a minute.

In fact, one of his correct start-up steps is very simple, as you can see, there are generally situations in life.

The phone is written correctly, and the boot steps are the same as the normal boot.

Self-integration starts the steps correctly, and you can start it in a specific way.

The operation also has to score a goal to start the review, the road should be repaired, and as soon as you rest, you feel that it is more reliable, which is the safest.

The correct start of the hand is actually a process of switching.

The establishment of the correct start step, when the other than the start, I will consult.

Before the start, the piano was all artificial, and when I broke up with him, I thought it was very good to still have it all idle.

As well as the correct starting steps, you have to check this or find a professional driver to tell you about it.

If the manual self-integration is the correct start-up step, this is through the linkage state. Then you can start it accordingly.

The correct starting step is to use the brake for starting.

The correct way to stop starting: Start: Start the vehicle only when you are in second gear of P and N.

Start in N gear, and when your car moves forward as it is after starting, you can first plug in the power (without starting the engine), press the brakes to pull the gear to N, then ignite, and then hang up to D gear to keep moving as it is. In this way, there is no need to apply a reverse shock to the transmission by side-selling through the R-speed after the slag fire is ignited at P speed. Parking:

After the car enters the parking position, step on the brake to pull the gear lever to N gear, pull the hand brake, release the foot brake and turn off the ignition, and finally step on the brake to push the gear lever into P gear! Of course, this is also the protection of the transmission for excellence. The steps are as follows:

1. The gears of the manual automatic integrated car are introduced: parking gear (P), reverse gear (R), neutral gear (N), forward gear (D), sports gear (S), and manual parking gear. Please note that parking is not "parking"; 2. When using it for a long time when parking, please use it with the handbrake.

Rear gear, driving backwards. Neutral. Please do not coast in n gear.

The short-range towing car is in N gear, and it can wait for a long time in red minutes or more), N gear. Of course, you can also wait in P gear. Forward gear, open casually.

Sports Archives. The reason for the delay in the upshift timing is that most of them have at least upshifted by 2500 or more, and they don't use the 6th gear, so the S gear is only 5th gear. Handbook; 3. Manually switch gears, push up and downshift.

It is possible to start in 2nd gear. When advanced, release the throttle, do not step on the brakes, do not downshift, supply fuel, the speed is too low, and automatically drop to the appropriate gear. If you don't actively upshift when driving, you can step on the red line to rpm.

How to open the hand automatically? Teach you how to drive a self-contained car in a minute.

Now the car on the market can be divided into automatic transmission and manual transmission, friends who like to drive buy more manual transmission, but as the traffic on the road is becoming more and more congested, many customers choose to buy automatic transmission, the car factory in order to meet customer needs, and finally launched a manual automatic model.

Now the car on the market can be divided into automatic transmission and manual transmission, friends who like to drive buy more manual transmission, but as the traffic on the road is becoming more and more congested, many customers choose to buy automatic transmission, the car factory in order to meet customer needs, and finally launched a manual automatic model.