-
<> house that has been renovated. It can be redecorated by removing the ceiling. Or use the integrated ceiling to renovate the ceiling after sound insulation and noise reduction.
Alternatively, you can consult a sound insulation and noise reduction company. The general treatment method is to remove the original ceiling sealing plate and add sound insulation materials. and spread along the wall.
If you figure out the sound propagation along the structural solid, you will know that the ceiling sound insulation effect alone is not very good, unless you can make six shock-absorbing soundproof walls in the room, which is the so-called room within a room, which is completely isolated from the building solid, so as not to be disturbed by vibration sound.
It doesn't do much for low-frequency noises like footsteps. Low-frequency noise is characterized by strong penetration. Imagine if you feel the floor slabs and walls vibrate when you hear this footsteps.
That's right, that's the penetrating power of low-frequency noise. The upstairs family has 2 children, and there is a lot of noise every day, and there is a family downstairs who is sensitive to sound.
Yes, if you smash a stool and a bowl upstairs, you will definitely not be able to do it. But general walking, moving stools, talking, snoring or something, making a soundproof ceiling is still quite effective. The most important thing for soundproof windows is the choice of soundproof glass, and the common double-layer glass, insulating glass and laminated glass on the market, among which the insulating glass has the best thermal insulation performance, the sound insulation effect of double-layer glass is general, and the sound insulation effect of laminated glass is the best.
This can be done sound insulation everything has advantages and disadvantages, the top sound insulation is mainly ** in the vibration of the floor The noise generated, the sound insulation effect will be better, but the noise generated by the vibration belongs to the low-frequency sound, and it is difficult to completely isolate it. It is recommended to coordinate with the upstairs to pay attention to it. In addition, as a sound insulation, the best sound insulation is to deal with the room on the side of the noise generation, so as to effectively reduce the vibration of the structure and reduce the noise, and the other side is actually very low.
-
Personally, I still need to install a sound-absorbing roof, because although the 150-square-meter conference room is not very large, when there are many people and the microphone is used for a meeting, the noise is still loud.
-
If there is a sound amplification equipment, you need to add a sound-absorbing roof, because this can play a certain sound insulation effect.
-
A: I think the decoration of the 150-square-meter conference room needs a sound-absorbing roof, because the volume of the meeting is relatively large, which may interfere with the office of others.
-
Need. This prevents disturbing others, and a sound-absorbing ceiling is installed in the meeting room so that the content of the meeting does not leak outside.
-
This kind of thing still needs to be installed, because the area of this conference room is still relatively large, and it still needs the blessing of this function.
-
The conference room has a lot of knowledge in the decoration, and the choice of materials also needs to be carefully considered. More often, in fact, the decoration level of the conference room determines the quality of the enterprise, so if it is the decoration of the conference room, is it suitable to use sound-absorbing soft packaging materials? In this case, the answer seems to be very appropriate.
Because in the conference room, because many meetings will involve the company's development direction and even some company secrets, the sound insulation effect of the conference room must be very good. And among the many sound-absorbing materials.
Are meeting rooms suitable for acoustic panels? Therefore, in the decoration of the conference room, soft packaging can be used to reduce the propagation mode of decibels. Those who have seen the attraction effect of soft packaging also know that this method will significantly improve the decoration grade of the entire conference room.
The most important point is that this decoration method is not particularly high in terms of budget, so even if the budget for the decoration of the meeting room is not very sufficient, you can safely use the method of attracting soft packaging.
In addition to the decoration of the conference room, if the decoration of other places, such as the design of sound-absorbing soft packaging, this scheme can still be used, but this method is required. There's plenty of space, so it looks better. If it is only used in a small area, it is recommended to use fabric sound-absorbing board or wooden sound-absorbing board, which is not very high in cost and can be controlled within a relatively reasonable range, but the visual effect is more suitable for small-area house decoration.
Convenience: cutting, sawing, planing, nailing, painting, gluing, most of the industrial design adopts socket, bayonet and joint design, therefore, the installation is time-saving, fast, simple to install, and easy to construct.
Stability: waterproof, moisture-proof, mildew-proof, anti-corrosion, moth-proof, termite-proof, effective flame retardant, weather-resistant, heat preservation, energy-saving, can be used in the outdoor environment with large changes in climate form for a long time, and does not deteriorate, does not become brittle, and the performance is not long. Authenticity:
The appearance is natural and beautiful, elegant and chic, with the wood feeling and natural texture of solid wood, with a sense of simplicity that returns to nature, showing the detailed texture and color texture of design and product materials, and also reflects the unique aesthetic feeling of modern architecture and material aesthetics through different design forms.
-
Yes. I think such a large conference room can accommodate a lot of people at one time, so it is very noisy, and this thing can be installed to isolate some sound.
-
Yes, because this kind of large conference room will be used for meetings, pay attention to the sound reduction treatment, be sure to reduce the noise, so that the meeting is more convenient.
-
No, I personally feel that the conference room does not need a sound-absorbing roof, and the use of good materials for decoration can play a soundproof effect.
In order to ensure the normal development and operation of the enterprise, there are often some meetings between major employees and managers to understand the recent situation and problems of the enterprise. And in order to ensure that the students receive a better education, the teachers also often have some meetings on teaching methods and progress. It can be seen that meetings occupy a very important part of modern people's work. >>>More
Any meeting room with broadband internet access can be used. >>>More
The laser pointer in the conference room has no effect on the human body. Generally, the power of the whip laser pointer is 5 10MW. The so-called laser pointer of more than 200MW can light a match, burn through a black balloon or a plastic band, which is scratched to the human body will feel warm. >>>More
The placement of the seat card is an important part of the work of the meeting. The seating signs are placed in a standardized manner and the seating arrangements are orderly, which can make the participants feel valued and respected, reflect the importance of the organizer and its staff to the meeting and a better level of holding the meeting, and guide the formation of a good meeting order. Zhijue has been engaged in office system work for a long time, and the following is combined with relevant rules to introduce you to the seating arrangement and corresponding precautions according to the type of meeting. >>>More
Office decoration per square meter of ordinary decoration costs about 300 500 yuan per square meter, in addition to different regions, style decoration company selection of materials, these will affect the decoration of the **. Then the most common decoration of the office is the partition, which can be made of light steel keel, gypsum board, and generally 120 150 square meters. Therefore, these ** are uncertain, and should be decided according to the actual situation and hobbies of the owner.