What is the growth habit of the singles tree? How to maintain a potted singles tree?

How to maintain a potted singles tree?

1. Soil: It is best to use loose sandy soil, which needs soil with good drainage performance, which can quickly discharge excess water in the soil.

2. Temperature: I like to be warm, but the light in summer is too strong, so I need to give proper shade, and there is less light in winter, so I should place the potted plants in a well-lit position.

3. Watering: drought resistance, the demand for water is not large, watering once a month can be, do not water too much, it is easy to cause water accumulation in the pot to cause plant root rot and other phenomena.

4. Light: If you like light, you should place it in an open air with good light, but you should give proper shade in summer to prevent too strong light from burning the plants.

5. Fertilization: During the growth period, you can apply a diluted Pica water-soluble fertilizer every 7-10 days, the plant will enter the dormant period in winter, during which you can not fertilize, and you can continue to fertilize when the temperature gradually rises, and you can not apply thick fertilizer to prevent burning the roots of the plant.

Growth habits of the single tree: The single tree is native to East Africa and South Africa. Due to the hot climate, drought and lack of rainfall, the amount of evaporation is very high.

Under such harsh natural conditions, in order to adapt to the environment, the singleton tree, which originally had leaves, has become smaller and smaller after a long period of evolution, and gradually disappeared, and finally became the strange appearance it is today. If the tree has no leaves, it can reduce the evaporation of water in the body and avoid the danger of dying by drought. Although the singles tree does not have green leaves, its branches contain a lot of chlorophyll, which can replace the leaves for photosynthesis and produce nutrients for plant growth, so that the singles tree can survive.

However, if you plant the singles tree in a warm, humid place, it will not only multiply easily, but it may also grow some small leaves! These small leaves can increase the amount of water evaporation, thus maintaining the water balance in the body. This is called survival of the fittest!

The singles tree is more suitable for growing in a warmer environment, and it can withstand arid climates. The soil for cultivating singles trees should be fertile, loose and well-drained.

Hello friends, light-loving plants, potted plants placed on the balcony, bright and ventilated places can be, more drought-tolerant, dry watering not dry and watering, extensive management can.

Everyone must be familiar with the model stick and Singles' Day before the debate, so have you heard of the singles tree? How could such a species of singles tree have such a strange name? In fact, because the singles tree is produced in a dry hell, the survival rate of the leaves is low, and it is almost a bare trunk, so it is vividly called the singles tree.

Let's take a look at how to raise a singles tree and how to breed a singles tree.

Warning] Singles Tree: After the stem is broken, the white milk can make ** red and swollen, and it can cause blindness if it accidentally enters the eye.

How to raise a singles tree Singles tree breeding method.

1. How to raise and breed singles trees.

Singles trees can be propagated by cuttings, and the time of May or June is suitable for cuttings.

At this time, the temperature is relatively warm and not hot, and the plant is strong in vitality, so the success rate of choosing single tree cuttings is high.

Choose a sturdy shoot, preferably with about two nodes, and slowly take root after 3 weeks after inserting it into the soil.

Second, how to raise the soil of the single tree.

The single tree itself is produced in a poor and barren soil, so the soil only needs to be drainable.

In the process of planting the singleton tree, let it bask in more sunlight, and sufficient light can naturally help the singleton tree grow healthily.

Proper shade in summer and plenty of sun in winter.

3. How to raise and water the singles tree.

The requirements of the single tree for water are relatively general, and there is no need for high frequency watering in the process of planting, and the water is handed over every 3 days in spring and autumn, and it can be increased once in summer.

After the temperature breaks 30, the singles tree will start to semi-dormant, and it is time to consider stopping watering.

Suitable temperature: Singles tree likes warmth and drought tolerance, salt and wind tolerance, likes light, and generally grows at a temperature of about 25-30.

Suitable soil: Well-drained soil is more suitable, as singles trees are inherently drought tolerant.

Suitable humidity: single tree is drought tolerant, salt tolerant, wind resistant, humidity is not easy to be too large, dry is better.

Proper light: The single tree is good and should be placed in the open air, but avoid exposure to the sun.

Watering Singles tree is a succulent, very cold-tolerant, not coarse too much water, usually should not be watered too much, or not dry, remember to be dry before watering. In the summer high temperature season, beware of watering after exposure to the sun, which will cause leaf drop. When the summer temperature is above 30, the plants are dormant and semi-dormant, and watering should be controlled.

Soil Singles trees need to change their potting soil every 1-2 years, mainly with new loose sandy loam. When the single tree grows to a certain period, the potting soil should also be replaced.

Light Singles trees are drought tolerant, salt-tolerant, wind-resistant, barren-tolerant, and prefer full sun. The key to flowering is to keep it in a sunny area all year round, but avoid exposure to the sun.

Fertilization The single tree enters the dormant period in winter, and the fertilization should be stopped. If the temperature is low, fertilization is prone to root rot. During the growing season, apply a thin liquid fertilizer containing nitrogen, phosphorus and potassium that is ripe once in 7-10 days, and do not over-concentrate.

Prevention of pests and diseases Singles trees are susceptible to charcoal disease and leaf spot disease, and need to be sprayed with methyl mobzine wettable powder. If the indoor ventilation is poor, the stems and leaves of the singleton tree are susceptible to scale insects and need to be sprayed with dimethoate emulsion. Please refer to the drug leaflet for details.

Remember not to water too much, which is easy to cause root rot, and the leaves will appear yellow or even gray mildew, and in severe cases, they will rot. We need to pay attention to ventilation and drainage. When the condition is severe, carbendazim can be sprayed.

Pruning of singles trees is usually carried out when transplanting or repotting. Transplanting is to prune and repot the overly long taproot or injured root system, and properly thinn the old roots, rotten roots and overly dense roots.

Singles trees need to be mixed with humus soil, garden soil, and fine sand in accordance with the ratio of 2:2:1 to make soil, and usually place the singles tree in a good light place for maintenance, usually need to master the principle of soil not drying and watering, and apply a thin phosphate fertilizer every half a month, and first prepare tools when pruning each time to avoid sprinkling plant juice to touch the **.

Singles tree likes to be in the soft sandy flower soil, generally mixed with humus soil, garden soil, and fine sand in accordance with the ratio of 2:2:1 to cover some perlite on the surface of the soil layer, so that the soil breeds singles trees, which can not only provide water and nutrients to it in time, but also increase the ornamental value of singles tree pots.

Generally, the singles tree can not accept the sun for a long time, otherwise its branches and leaves will gradually weaken, reducing its ornamental value, the singles tree needs to be placed in a good light place for maintenance, which may avoid the singles tree from growing, but the summer afternoon sun is scorching, it is easy to dehydrate the plant, so it is necessary to do a good job of sun protection measures.

When it comes to how to raise the single tree, in fact, the drought tolerance of the single tree is particularly strong, it is particularly afraid of waterlogging, so watering must not be too frequent, follow the principle of soil not drying and not watering, it does not have a high demand for nutrients, usually every half a month to apply a thin phosphate fertilizer, fertilizer should not be too thick to avoid rotten roots.

Every time you give a singles tree, you need to pay attention to it, it is easy to touch the juice when pruning and cause **disease, so it is usually necessary to prepare tools to avoid ** touch and injury, you need to cut off the yellow, weak, old branches, and over-dense parts of the singles tree, if you find that the stems and branches of the singles tree are too long, you also need to prune it properly, and you can keep 3 5cm.

After pruning the singles tree each time, you can select the sturdy branches for cuttings, first of all, you need to loosen the soil properly, the pruning part of the branches will flow a lot of juice, then you need to apply plant ash to it, and then insert the branches into the soil, sprinkle water and wait for the branches to take root.

1. Watering: The single tree is a succulent, very cold-resistant, not coarse and too much water, usually not watered too much, or not dry, remember to be dry and then watered;

2. Change soil: Singles trees need to change the potting soil once every 1-2 years, and the new loose sandy soil is mainly used to search for lead soil;

3. Fertilization: The single tree enters the dormant period in winter, and the fertilization should be stopped and the thin liquid fertilizer containing nitrogen, phosphorus and potassium should be applied once once in the growing season for 7-10 days, and it should not be too concentrated;

4. Pest control: Singles trees are susceptible to charcoal disease and leaf spot disease, and need to be sprayed with methyl mobzin wettable powder, if the indoor ventilation is poor, the stems and leaves of the singles tree are susceptible to the damage of shell insects, and they need to be sprayed with dimethoate emulsion, remember that watering should not be too much, and pay attention to ventilation and drainage;

5. Pruning: The pruning of the single tree is generally carried out when transplanting or changing the pot.

1. Flower soil: It does not have too many requirements for flower soil. However, because it is relatively resistant to waterlogging, it needs to be nourished with soil with good enough drainage.

2. Temperature: The most suitable temperature range for it is 25-30. It is more afraid of cold, so when the temperature is relatively low at the end of the year, you need to keep it warm.

3. Light: It likes light, and it should be provided with enough light. However, in the middle of summer, it needs to be properly shaded to prevent it from getting sunburned.

4. Watering: It is afraid of waterlogging and has strong drought tolerance. Therefore, watering it should keep its flower soil dry and not overdone.

5. Fertilization: In the growing season, you need to apply some necessary fertilizers, about once every 7-10 days. In winter, it will be dormant for a short time, at which point the application can be suspended.

After every 1-2 years of cultivation, the nutrient content in the soil will drop to a relatively low level, and it is also prone to compaction. At this time, it needs to be replaced with soil to provide it with a better environment.

It is prone to leaf spot. Therefore, when breeding, it is necessary to spray some lower concentration of liquid medicine every once in a while to prevent this disease.