How to fix the bathroom bomb light when it is not on?

Bath bomb light does not light up repair method:

1. You can check whether the bulb is in poor contact or a single bulb is burned, in this case, you can change the bulb. Check to see if the top wire on the bath bomb is burned, and if so, replace it if it is safe to do so.

2. Check whether the zero line contact of the bath bomb is good and whether the lamp head is loose; Open the switch panel to see if the switch is in bad contact and whether the link line is interrupted.

3. The power of the bath bomb lamp is too large, and the line heats up quickly and burns out. In this case, first of all, we must understand the power of the bath bomb, the wire used by the bath bomb with high power is generally more than 4 square meters, and it is best to use 6 square copper wires, and do not use lead wires cheaply.

The bath bomb light is not lit - maintenance precautions:

1. The bath bomb is an important electrical appliance in the bathroom, when the bath bomb lamp encounters a problem, you can cut off the main circuit and then check, if you want to replace the circuit, you can replace it yourself, if you don't have a line to pass, you can contact the merchant or an electrician for maintenance, do not disassemble and repair it yourself.

2. After the bath bomb is turned on, the bath bomb will refract its own warmth through the bath bomb lamp after its own start, and its light can quickly heat up within a few seconds.

3. The bath bomb lamp has a lighting function, which uses soft lighting bulbs and is made of different quartz materials, which makes the thermal effect very high.

My bath bomb light isn't as bright as it used to be when it's turned on. It's almost dark and you can't see anything, and it takes 3 or 5 minutes to see things. But what is the reason why it is not as bright as before?

How to repair the bath bomb light that does not light up:

1. Check whether the bulb is in poor contact or if a single bulb burns out.

1. If one of the bath bomb lamps does not light up, directly check whether the bulb is in poor contact, or maybe a single bulb is burned out, under normal circumstances, the bulb is damaged, just replace it with a new one.

2. If it is poor contact, it depends on the poor contact of the bulb or the poor contact of metal accessories, which also needs to be repaired.

2. Check whether the top wire of the bath bomb can be burned.

1. Generally, under the premise that the four bulbs are not lit, first check whether the top wire of the bath bomb can be burned, and if so, stop replacing it under the condition of ensuring safety.

2. Use the universal meter to find the cause first, then reconnect the line, keep the power supply unblocked, and finally overhaul it.

3. Check whether the neutral line contact of the bath bomb can be good.

Check whether the zero line contact of the bath bomb can be good, whether the lamp head is loose, first turn over the switch panel, check whether the switch contact is poor, and check whether the link line can be infixed.

Fourth, the power is too large, and the line is burned.

1. The power of the bath bomb lamp is too large, and the line heats up quickly and burns out, in this case, first find out the power of the bath bomb, the power of the bath bomb, the wire used is more than 4 square meters, it is best to use 6 square copper wire, do not cause danger due to greed for cheapness.

2. If it is caused by this reason, replace the line first, and want to match the bath bomb, and pay attention to maintenance in future use.

In the past, taking a bath in winter can be said to be a very troublesome thing, and the temperature is very low and you will shiver from the cold when you take a bath. But now this kind of problem can basically be solved, as long as you install a bath bomb at home. Bath bombs now have the effect of heating, so that you don't feel particularly cold when you take a bath, and the heating methods mainly include lamp heating and wind heating, and lamp heating is the most commonly used.

So what's going on when the lamp heater is not on?

These places can be checked.

The lampholder is not in good contact, or there is a problem with the wiring. It is recommended to tighten the warm lamp or replace the warm lamp with another warm lamp in another location for troubleshooting;

Check if the heat lamp is black or white. If this phenomenon occurs, it is recommended to replace the heating lamp directly.

When the heating lamp is turned on, the lighting is automatically turned off by the light heating product. This is a heating and lighting interlock circuit, which is normal.

It depends on personal choice.

Advantages and disadvantages of the lamp warm bath bomb Pros:1The temperature rises quickly, it is hot when opened, and it is as warm as the sun;

2.Low power consumption, one bulb is about 250W, four fully open is 1kWh, and 1 kWh is 1 hour.

Cons: 1The range is small. Only when the lights are warm, the bottom is warm. High altitudes are hot in the first place. Usually the head and feet are not hot enough. The rest of the bathroom was not warm. If the floor is low, the head will be hot.

2.High brightness. If there are children in the house, please be careful. If the child is staring, glare can affect the child's vision development.

3.There are certain safety hazards, because the heating power is too high, and the temperature is too high, there is a danger of bulbs.

Advantages and disadvantages of air heater bath bomb Pros:1Blowing hot air to heat the entire bathroom in a few minutes;

2.Warm air can blow cold winds, so it can be used in summer;

3.The relative light temperature does not limit the height of the floor;

4.The ventilation function is strong, and the air remains fresh after opening;

5.On rainy days in the south, clothes can be air-dried.

Cons: 1The temperature rises more slowly than the lamp is warmer. It is best to open it for a few minutes before taking a bath;

2.The power consumption of air heating is large, and most of the air heating is, much more powerful than lamp heating, and naturally much higher.

Lamp Bath Bomb** is relatively cheap. Under normal circumstances, you can buy a good lamp bath bomb product within 500 yuan. The lamp bath bomb itself is a warm type, **cheap.

The air heater is actually similar to a heater, and it is slightly more expensive, usually it costs more than 500 yuan, so the difference between these two bathroom heaters is very large. One is more than $500 and the other is less than $500.

If your toilet bomb light doesn't come on and you find that the bulb isn't damaged. Well, this could be due to several reasons:

1.Poor wire connection: This is one of the most common reasons for state registration.

Poor wire contact will cause the current to not pass through properly, which in turn will cause the bath bomb light to not light up. You can first check that the metal contacts in the bulb's interface and lampholder are clean and loose-free. If it is loose, you can use a screwdriver to tighten the screw, or if the contact point is defective, you can use pliers to squeeze it tight.

2.Bath Bomb Light Switch Failure: If the wires are in normal contact and the bulb is still not lit, then it may be a bath bomb light switch failure. You can use a universal meter to check if the switch is working, and if a fault is found, you need to replace the light switch.

3.Power line failure: If the bath bomb light is still not on, then there is a high chance that there is a power line failure.

In this case, you need to check the wire splices or power lines for short circuits. If this is the reason, it is best to contact a professional maintenance worker for the chain roller to be inspected and repaired.

In short, to fix the problem of bath bomb light not illuminating, you need to understand the cause and repair method. If you don't know how to inspect and fix, be sure to seek the help of a professional to ensure your safety and proper repair methods.

How to repair the bath bomb light when it doesn't turn on:

1. If there is only one bath bomb lamp that does not light up, it is generally because the bulb is burned out or the contact is not good, in this case, you can directly replace the new bulb.

2. If the four bath bomb lights are not lit, the wire at the top of the bath bomb should be checked to see if the line is burned out, and after determining that the wire is burned, it should be replaced.

3. The circuit connection in the switch panel is not in place, in this case, the disconnected line needs to be connected, or the new circuit needs to be replaced directly.

4. The power of the bath bomb is overloaded, and the inlet wire with higher power needs to be replaced.

Precautions for using air heater bath bombs:

When used, the safety performance of the air heater bath bomb is stronger than that of other types of bath bombs. However, its outer shell is metal, so it is easy to conduct electricity. In this way, we can't splash water on it when cleaning or using, which will cause a short circuit.

And some people want to save electricity, wait until the bath bomb has the heat, turn it off, and then open the high collapse reed when it is cold. When this is frequently turned on or off, the use time of the bath bomb will be greatly reduced, and the comfort of our use will be affected to a certain extent.