In the south, there is more rain in spring and summer, how to prevent solid wood furniture from gett

Avoid opening windows when it is rainy, it is best to put the furniture in a place with better ventilation conditions, and try to open the windows as much as possible when the sun is shining to maintain indoor ventilation, so as to effectively prevent solid wood furniture from collecting moisture.

Do not open the window to prevent moisture when it rains, turn on the dehumidification function of the air conditioner on rainy days, do not wipe the solid wood furniture with a wet cloth, do not place the furniture by the window, and do not let the furniture touch the ground directly.

First, don't place solid wood furniture next to windows, and secondly, you can use some tiptoe to keep these furniture off the ground.

Solid wood furniture is very obvious after being damp, not only the paint on the surface of the local discoloration, the more serious mildew spots are also normal, the damp parts may appear swelling and deformation, in the connection parts of the wood, and even cracking.

If the solid wood furniture is seriously damp and there is condensation or mildew spots on the surface, you can put a pack of desiccant inside the furniture to absorb moisture, and wipe a layer of walnut oil to isolate the moisture after absorbing and drying with a dry towel on the outside.

The daily maintenance of solid wood furniture should also be noted, which can be maintained with special detergents and waxed regularly. If the solid wood furniture is slightly damp, it only needs to be dried in a ventilated place, and must not be exposed to the sun or roasted with fire.

Introduction:

Solid wood furniture refers to furniture made using solid wood. Generally, solid wood furniture will be divided into two types: pure solid wood furniture and all solid wood furniture.

Solid wood furniture is divided into beech, teak, maple, oak, red toon, ash, elm, poplar, pine, etc., among which beech, teak, and red toon are the most precious.

China's solid wood furniture industry is in a good situation of operation and development, and the Zhiyan Data Research Center shows that with the continuous expansion of China's solid wood furniture industry operation market, the operation of China's solid wood furniture industry will usher in a new development opportunity.

When it comes to rainy days, the furniture in our home will be moldy and damp, so we should put more desiccant in the wardrobe on weekdays to absorb moisture, put a package of desiccant in every corner of the wardrobe, the top and the bottom, and usually encounter good weather, when the sun is particularly bursting, you can open the window, and open the cabinet doors of all the furniture, so that the sun's light can shine directly in, expose the furniture to the sun, and can also effectively remove the traces of moisture. <>

When we usually clean at home, we generally don't choose a wet rag or a wet mop to wipe the table and mop the floor. Because wiping the table with a wet rag for a long time, wiping the furniture will cause the wood to be invaded by moisture, and it is easy to mold and damp for a long time, especially when it rains, it will be more obvious, when mopping the floor, we try not to put the mop next to the furniture, because the mop is wet, so we can take a dry cloth to wipe off the local dust to avoid the furniture from contacting moisture. <>

We can move the furniture out a little distance every once in a while, so that the wardrobe and the wall are not so tight, because our wall is very damp, and the wardrobe and the wall are so close that the wardrobe will also be easily damp, so when placing the furniture, the wardrobe can be separated from the wall by one foot, so that the wall and furniture will reduce the phenomenon of moisture. <>

In fact, the furniture in every home is subject to moisture, but don't worry. When you're not busy at work, you can turn every piece of furniture in your home and twist the side that is often hidden on one side of the wall and expose it to the sun for a day, which will reduce its dampness. You can choose to dry it once a month, so that for a long time, your wardrobe, sofa, and furniture will definitely not get damp and moldy, and you can also put some desiccant and open the window frequently for ventilation.

Back to the south of the day, even the rain will make the furniture damp, furniture wants to be moisture-proof, to be treated by type, mainly leather, fabric, solid wood more. First of all, if it is leather furniture, we can use a soft dry cloth and lanolin to protect it from moisture. Secondly, if it is solid wood furniture, we need to use detergent and protective wax for maintenance.

In addition, if it is fabric furniture, it can be washed and dried. <

We often encounter some small troubles in life, such as furniture will be particularly damp in rainy weather, will be corroded, moldy, smelly. Regarding furniture moisture-proof, there are actually some skills, and different furniture moisture-proof skills are also different.

First of all, if it is leather furniture, we can use a soft dry cloth and lanolin to protect it from moisture. Leather furniture will become very hard if it gets wet, and it will fade and deform over time. Then, we can wipe off the moisture on the surface of the leather with a soft dry cloth, and then apply a layer of maintenance oil, which can be leather oil or lanolin oil, which can soften the leather and also prevent moisture.

Secondly, if it is solid wood furniture, we need to use detergent and protective wax for maintenance. Once solid wood furniture is wet, it will rot and mold, and it will fall off. Don't worry about the moisture return of solid wood furniture, we can use protective wax or detergent to apply to the surface of the furniture, and then gently wipe it, as long as a protective film is formed on the surface of the furniture, it can maintain the glossy sense and avoid the erosion of moisture.

In addition, if it is fabric furniture, it can be washed and dried. If the fabric furniture is damp, it will generally look dirty and easy to stick, but it is also very convenient to deal with, we just need to clean it and then dry it. If you don't want to clean, there is usually a more convenient way, which is to use a vacuum cleaner to suck up the dust first, and then cover it with a sofa towel.

The above are some tips about the moisture-proof furniture.

Close the doors and windows in the morning and evening to avoid humid air entering the house, and you can put a little desiccant at home to dehumidify.

Windows should be closed in advance, moisture-proofing, and electric heaters should be installed at home for drying.

Reduce the inflow of humid air: close the windows in the morning and evening The harm of humid weather is serious, and the first thing to ensure that the home is protected from moisture is to prevent moisture.

1. The selection of plates is the key: the box board accounts for a large part of the furniture, and if you want to choose good furniture, the main materials can not be sloppy. Not only should Qiaozhen be waterproof and moisture-proof, but also environmentally friendly materials that meet the national E1 standard are the key to protecting the health of your family.

2. The installation process should be in place: when installing the wardrobe, it is often necessary to dig holes in the box board, and the multi-functional edge banding strip can tightly wrap the cutting edge of the plate and play a better role in waterproof and moisture-proof. If the installation is not appropriate, it is easy to leave a gap and give water vapor a chance.

3. Back protection is very important: the back panel veneer can not only be waterproof, but also prolong the life of the furniture. In the process of choosing furniture, consumers must pay attention to the details on the back.

The use of double decorative veneer back panel can completely avoid the exposure of the MDF substrate, and water will no longer have the opportunity to enter the board from the back of the cabinet, which is a good helper for water and moisture resistance.

4. Observe the subtleties: Places that are not easy to notice can have serious consequences due to neglect of protection and attention. When choosing, you must not let go of the small parts, whether the furniture production is professional, through the observation of the details, you can be filial piety, you can do the change of heart.

A small part of the humanized design is the key factor in the success or failure of the purchase of furniture.

1. Solid wood furniture

Generally speaking, solid wood furniture has undergone a strict drying process before leaving the factory, but this does not mean that it can be left without moisture-proof cultivation. In the moisture-proof work of solid wood furniture, it can be maintained with a special wood furniture cleaner, which can be evenly coated on the surface of the furniture with protective wax or special detergent, and then gently wiped to form a protective film on the surface of the wood furniture to keep the furniture shiny and moisture-proof.

2. Leather furniture

For leather furniture, the leather of leather furniture will be cold and hard after moisture regain, and mildew spots will appear on some less ventilated surfaces, and even deformation or discoloration of colored leather surfaces after moisture. Therefore, if there is leather furniture at home, it is best to wipe off the moisture on the surface with a soft dry cloth, and then wipe the surface with special mink oil, lanolin oil, leather oil, etc., which can not only soften the leather, but also prevent moisture and mildew; Also consider putting some desiccant appropriately to keep it dry.

3. Fabric furniture

The resurgence of fabric furniture will generally show moisture, easy to stain dust, and it is easy to appear dirty when sticking together. Therefore, the fabric sofa should be used with a special vacuum cleaner to suck up the dust on its surface, and it is best to use a sofa towel with good water absorption performance and clean it frequently.

4. Rattan furniture

It is relatively easy to prevent rattan furniture from moisture, and the advantage of rattan furniture is that after it is dried, it will return to its original shape and size. Therefore, when rattan furniture is damp, it is necessary to be careful not to put heavy pressure to prevent deformation, as long as it does not let its woven shape and its gap become messy.

5. Metal furniture

When metal furniture is wet, the metal handrails or legs are corroded, especially the surface of iron furniture is faded and spots. Therefore, metal furniture should be often scrubbed with a damp cloth and soft detergent, try not to use it in a humid environment, and pay attention to waterproof and moisture-proof, once rust should be brushed off in time, such as wet weather is best cleaned with a dry rag.

In the southern region, during the rainy season, how to prevent mildew from wooden furniture?

1.Indoor ventilation is required. If the air is humid, it is necessary to reduce the opening of windows, so as not to have too much humidity in the room and affect the use of wooden furniture.

If the indoor air cannot be circulated, you can open the window at noon or in the afternoon and put some charcoal indoors to help dehumidify the furniture. Keep it dry and pay attention to the time of ventilation and avoid opening windows in the morning and evening, as the humidity outside is at its highest during these two times. It is best to ventilate at noon when the sun is at its highest and the temperature is at its highest.

Of course, you can also put some charcoal, desiccant, and dehumidifier boxes indoors while opening the window. A dehumidifying bag with a variety of fruit and floral scents can absorb moisture and fill your home with a pleasant scent. After using it for a while, remove the desiccant from the dehumidifier box and put in a new one, which can be used again.

2.Wooden furniture should not only be close to the wall, but also keep a distance of about 1cm from the wall to avoid the invasion of moisture. You can also wax furniture. If it is moldy, you can apply a layer of furniture wax or furniture essential oil to the moldy part.

3.If water droplets appear on solid wood furniture, wipe them with a dry cloth dipped in a special furniture cleaner. Detergents can form a protective film on the surface of furniture, preventing water vapor from penetrating into the interior of the furniture to a certain extent.

4.Timely treatment of water vapor, moisture is the natural enemy of natural wood. Once the furniture is found on the water, it needs to be wiped with a dry cloth in time, and the window should be opened for indoor ventilation and dehumidification. If the weather conditions do not allow, you can turn on the dehumidification function of the air conditioner.

5.Newspaper can be laid at the bottom of the wardrobe, and the inside of the chest of drawers, etc., and the newspaper can be used to absorb the moisture of the confined space, because the newspaper has a good water absorption performance, can absorb part of the water in the wardrobe, and has a certain effect on preventing mold on the clothes.

6.Regular waxing, regular waxing of wooden furniture can also be limited to avoid mold. The wax prevents water beads from adsorbing and thus moisture. In addition, in the wet season, it is necessary to increase the cleaning and maintenance of wooden furniture.

Wooden furniture can be hung with some moisture-proof supplies, which need to be dried after the rainy season, so that they can be well moisture-proof.

When choosing wooden furniture, try to choose leather, and it is best to use a soft dry cloth to remove dust, wipe the leather surface to apply special lanolin or leather oil, and often to maintain.

Blowing an electric fan on furniture will blow away the moisture from their surface and will make them drier.

The finished wood is kept in a different state according to the humidity environment, and if the humidity changes too much, there will definitely be problems. My friend, a long time ago, my father moved professionally from Fujian Province to Jinan, and when he moved, he had a good set of solid wood furniture.

It turned out to be like shooting every night. Until the heating households in Jinan were completely bleak. Consumers generally only pay attention to style, quality and brand when choosing furniture, and almost do not understand the influence of the differences between the north and south regions of furniture, and often only people in the industry know.

In the case of solid wood household products, the direct cause of the influence of the area is the moisture content of the wood.

Generally speaking, all wood itself contains a certain amount of moisture, and furniture factories often dry the wood after purchasing it and before producing furniture. The balance point is handled as much as possible, but not all factories have this kind of precision processing capability, and it is difficult to inspect even without a precision specialized organization. As a result, many so-called "North-South Quality Problem" products were born.

There are generally no quality problems when selling products to customers in the region, but the problem is that there are large differences in temperature and humidity between the north and the south.

Solid wood furniture due to the difference between the north and the south, the board.

Deformation and cracking are mainly caused by the polarization difference of temperature and humidity, the difference in temperature often causes deformation, and the difference in humidity often causes cracks. Some consumers reported that the solid wood furniture he bought at the local furniture factory showed cracks for a period of time after use, why is this? The reason is simple.

Raw materials are purchased in other places, and there are problems with the local natural wet and dry balance or manual treatment, so problems can also arise after a while.

When we buy solid wood furniture, the difference between north and south is only one of the factors, choosing a quality brand from a large manufacturer is the most important, and only a furniture factory with scale has the quality assurance of raw materials.

In addition, if you choose a possible solid wood furniture with a book structure, this technology can avoid some deformation problems in the process. In the south, the moisture content inside the wood of furniture is high, but the humidity of the surrounding environment basically does not change much and can be said to be constant. Therefore, it will remain in its original form during use and will not have problems.

Suddenly in the north, a radish without any protection, like putting it directly in the refrigerator, does not take long, dehydration will wilt. The northern climate is dry, and the rapid loss of moisture can cause the wood to shrink strongly. However, the dehydration shrinkage rate of a tree in three directions is different, the size of the wooden block is different, and the breadth of shrinkage is also different, and a tree with large and small furniture, different lengths and widths is connected together, and when they shrink to different degrees, strong stresses will be generated, which will lead to damage to the expansion of the furniture.

In the case of a table, for example, the table shrinks by 5 mm and the table shrinks by only 1 mm. So good furniture should consider this issue.