What is the difference between diatom mud and silica?

Diatom mud and silica are both a new type of wall decoration materials, and silica is a secondary processing and purification product of diatomaceous earth. The silica content of silica is above that, the silica content of diatomaceous earth is about 85%, the specific surface area (porosity) of silica is 3-5 times that of diatomaceous earth, and the adsorption capacity of silica is significantly higher than that of diatomaceous earth. In terms of appearance, diatom mud is mainly expressed in the form of texture, and silica is embodied in the form of wallpaper patterns; In terms of formula system design and production process control, silica decorative wall materials are much more complex than diatom mud; In terms of product formaldehyde evolution rate, moisture absorption and discharge, mold prevention and other performance indicators, silica decorative wall materials should be obvious due to diatom mud.

At present, the wall material products with silica as the main functional filler in European countries are developing rapidly, and there is a momentum to replace traditional latex paint.

Silica is better than diatom mud, diatom mud in my living room, silica in my bedroom. The hands in the bedroom are soft to the touch, and the diatom mud in the living room does not feel like in the bedroom, and the diatom mud in the living room looks too rough, and every time I return home, it makes people feel very dry, and I am ready to replace the living room with silica next month.

The oxygen and ecological wall materials I use at home should be the main raw material of this silica.

In terms of composition, the composition of silica will be better.

I think silica is better than diatom mud.

Activated carbon is a kind of preventive adsorption material, the effect of pure adsorption of formaldehyde by diatoms will be a little better, because the release of formaldehyde is relatively large, the release period is long, in addition to formaldehyde, it is recommended to use a variety of methods together, and several easy-to-use methods are recommended for everyone.

2.Open the window ventilation is the best way to remove free formaldehyde, when the window is opened, there will be a steady stream of fresh air will dilute the indoor air containing formaldehyde to achieve the purpose of purifying formaldehyde, but the window is easily affected by the weather, and the effect is also affected by the house type when used.

4.In the case of high temperature, it can promote the conversion of formaldehyde in the bound state into free formaldehyde and reduce the total content of formaldehyde, because formaldehyde penetrates deep into the board, although formaldehyde cannot be completely removed, but its effect is still very obvious.

5.The fan can assist in opening the window for ventilation, many houses are not necessarily transparent, and the effect is not very good when the window is opened, so the fan can be used to accelerate the air flow in the room and quickly discharge the free formaldehyde in the air

Diatoms are pure.

Diatom purity is better than activated carbon, because the porosity of diatom purity is very high, and the activated carbon is 5,000 to 6,000 times, so that its adsorption power is dozens of times that of activated carbon, and it has a strong adsorption force.

The pure pore size of diatoms is the same as that of formaldehyde molecules, so the effect of formaldehyde adsorption is stronger. Diatoms also have a decomposition effect, which can automatically decompose harmful gases in the air and will not produce secondary pollution, while activated carbon only adsorbs but does not decompose. Therefore, diatom purity is better than activated charcoal.

Diatom pure is much better than activated carbon, but these two methods are not efficient, and the most commonly used aldehyde removal methods are as follows

1. Muguang blue spray, it is a photocatalyst, which can go deep into the interior of the decoration material to decompose formaldehyde.

2. The odor machine, which removes aldehyde by filtering formaldehyde, is sold by a certain treasure.

3. Moqing stone, this is what many people will choose, its removal efficiency is 20 times that of activated carbon, and it is not easy to achieve absorption saturation, and it will not be reversed release.

1. Muguang blue, it is a photocatalyst, which can effectively release the internal formaldehyde removal of formaldehyde materials in depth, which can be bought on a certain treasure.

2. The odor machine is removed by filtering formaldehyde, which can ensure a healthy indoor environment.

3. You can buy some Moqing stone of the goddess of the bamboo sea and put it at home, this is made of natural ore, it can effectively decompose formaldehyde and release harmless gas, Tmall can buy it, and it is not very expensive.

Activated carbon needs to be sunned, because activated carbon can only be adsorbed, adsorption to a certain extent will be saturated, if not taken out to dry, it will be released again, and re-released will be in the air, causing secondary pollution.

The pure porosity of cyanogen diatoms is relatively high, which is thousands of times that of activated carbon, and it automatically decomposes after adsorption, so there will be no saturation and weak adsorption. The effect is naturally better than activated charcoal.

If formaldehyde is adsorbed on the diatom mud wall at home, it has been staying at home, and I don't know when it will be released, you can go to the Goddess of Zhuhai to buy some ink stone, it uses the principle of ion exchange, so that it can efficiently decompose formaldehyde, and formaldehyde will never be released again after being decomposed.

X4T6G1, activated carbon packaging is best sealed packaging. Because the air is more or less permeated with a variety of organic macromolecular substances, especially in the newly renovated store or home storage cabinet in the phenolic concentration is very large, these substances will be adsorbed by activated carbon, over time, the adsorption performance of activated carbon will be reduced or even unusable because of the adsorption of these substances. Therefore, the higher the adsorption value of activated carbon, the more it should be sealed to prevent the performance of activated carbon from being interfered with by the outside world.

2. Some of the counterfeit activated carbon on the market is passed off as a semi-finished product of activated carbon, and the carbonized material can only become real activated carbon after the "activation" process, and the activation process is the most important process of manufacturing pore structure in the activated carbon manufacturing process. The carbonized material lacking this process can be said to have almost no adsorption performance, which makes consumers suffer a lot. Because the carbonized material does not have the process of activating and forming pores, the surface is smoother than the activated carbon, and the color is whitish, slightly metallic, the feel is harder than the activated carbon, and the weight is much heavier.

There is a considerable part of the counterfeit activated carbon using inferior raw materials mixed with diatomaceous earth firing, its carbon content is very low, most of them are inactive substances, the color of this carbon is relatively white, the feel is very heavy, the length of the particles is longer, the strength is also very high, colliding with each other will make a crisp sound similar to ceramic percussion, with hand break will find that there are white fine particles on the section, we must pay attention to avoid being fooled when purchasing.

Many people think that diatom mud is safe and environmentally friendly, absorbing formaldehyde and absorbing water and moisturizing, in fact, it is similar to the function of activated carbon, and the formaldehyde can only be adsorbed and can not be decomposed and removed.

It is a new type of wall decoration material, and the performance indicators of silica are significantly better than diatom mud. Diatom mud is mainly a texture pattern, which is relatively rough; Silica is mainly a wallpaper effect, silky and delicate. Of course, silica is also much more expensive than diatom mud.

Depending on the decoration style, as long as there are rice meters, it will be better to choose silica.

There is an essential difference in terms of materials, there is no comparison, Zhongding diatom mud is the best choice in diatom mud.

More than 80%-90% of the activated carbon is composed of carbon elements, including powdered activated carbon and granular activated carbon, which rely on microporous adsorption on the carbon surface to achieve the effect.

Diatom pure is a new generation of air purification products with diatomaceous earth, tourmaline and other pure natural mineral materials as the main components, the main component of diatomaceous earth is SiO2, so high-quality diatoms are pure gray-yellow or milky white, and the porosity is 500 times that of single-volume activated carbon.