How can there be a layer of MDF on a multi layer solid wood cabinet door?

Because MDF is a kind of board that is pressed under the condition of heating and pressurization after being crushed, separated from the fiber, and dried with resin applied to the natural wood fiber as raw material. Features: uniform internal structure, smooth and flat surface, good load-bearing, not easy to deform, good aesthetic effect.

Because MDF is a kind of board that is pressed under the condition of heating and pressurization after being crushed, separated from the fiber, and dried with resin applied to the natural wood fiber as raw material.

Features: uniform internal structure, smooth and flat surface, good load-bearing, not easy to deform, good aesthetic effect. MDF (fiberboard):

It is a man-made board made by processing wood or non-wood plants into fibers and adding adhesives to use at high temperature and high pressure. According to its different densities, it is divided into: high-density board, medium-density board, and low-density board.

Commonly used is MDF.

Advantages: excellent powerless performance, uniform material, no dehydration problem. The performance of MDF is close to that of natural wood, but without the defects of natural wood.

The internal structure is not easy to warp, crack and deform, and is suitable for various machining. The surface is smooth and smooth, the material is fine, the edge is firm, and it is easy to shape, avoiding problems such as decay and insect moth. High flexural strength and impact strength.

MDF can be carved and other special-shaped shapes. Disadvantages: Poor moisture resistance, poor re-nail ability, and not easy to fix.

In terms of cost saving, medium and lower grade solid wood doors are all done this! Save labor and materials! The highest-end pure solid wood is also spliced into a small strip!

The advantage of this is that it does not deform! That's a big mistake, the vast majority of doors and door sleeves of carpentry are Aosong boards, and you have to use Aosong boards to mix oil, so it is cheap and easy to operate! If you want pure wood, that's no!

However, the multi-layer of solid wood generally refers to the outermost bark of solid wood, which needs to be decorated on the surface of the Ousong board. If you don't use Osson board on the surface, if you use Osson board (Osson board) on the surface, also known as OSB Of course not, my family is made of mahogany, are you fooled.

In fact, this kind of solid wood encryption board.

The process or directly use the multi-layer board (MDF + intermediate multi-layer board), which is higher than the cost of using multi-layer board alone. The encryption degree board is mainly because of the milling and surface stability of the MDF, and the paint effect is better. multi-layer board due to the plates.

Quality problems can lead to paint dents, delamination, etc. However, if you use MDF directly, most of the market will feel that it is relatively low-end. Therefore, on the premise of taking into account the market and the completion effect, MDF is used on both sides to strengthen stability, and solid wood is used in the middle. Board.

Multi-layer solid wood cabinet doors aboveMDFIt's because of the need for styling. The substrate of MDF is wood fiber, glue is added to form the board through high temperature hot pressing, and MDF is actually common and commonly used in life. Many of the shaped door panels are made of MDF, because MDF can be used in a variety of shapes, such as European, Chinese classical, etc.

Plate Encyclopedia:

When you hear the name, you will know that the multi-layer board is a cabinet board formed after the multi-layer thin board is glued, and the multi-layer wood splicing in the middle is also different, with three layers, five layers and so on. There is a difference in the thickness of the panel, generally speaking, the cabinet panel will be thinner than the door panel. However, as a kitchen cabinet panel, multi-layer panels are not ideal to use.

Paint-free board. In the past, it was used more in the consumer group, and the color of the cabinet was generally used in the home, and there was no need for redundant processing and painting, and the paint-free board was made of melamine.

Impregnation and veneers made of different colors and textures, there are many types of veneers actually used in the board.

Including solid wood boards, MDF.

Thick core board and ecological board.

Wait a minute. Many small manufacturers will say that it is healthy and environmentally friendly under the banner of paint-free, and the board is processed through a series of processes before entering the house. Lots of whole house customization.

Brand manufacturers in the paint-free board push less, whether it is environmental protection or later use of few customers are still willing to choose, but a small number of groups are still more audience.

What to do if MDF makes a cabinet door! Hello Fiber, happy to answer for you. The cabinet door with MDF, which has been installed, even if it feels bad, do not go to the damaged ridge, that is to say, in the process of use, we must be cautious and pay attention, the most feared MDF is damp and.

If you don't feel good, replace the MDF door and use a different door. If you don't change it, you can continue to use it. 1. MDF is a kind of synthetic board, which is made of wood powder slag and some sawdust plus glue containing formaldehyde and benzene, which is environmentally friendly and easy to have an adverse impact on the health of the cherry blossom residents.

2. The MDF fiber is relatively finely crushed, the internal structure is loose, the nail holding force is poor, and the screw is easy to loosen after screwing. The moisture resistance is poor, and the water swells and is easy to deform. The strength is not very high, generally use MDF to make wardrobe cabinet doors, the height can not be too high, and its height is generally not exceeded.

Hope mine can help you! Do you have any other questions?

Because MDF has stable performance, impact resistance and easy processing.

Medium density fiberboard (MDF)), the full name of density fiberboard, is made of wood fiber or other plant fibers as raw materials, prepared by fiber, applied with synthetic resin, and pressed under the condition of heating and pressurization.

According to its density, it can be divided into high-density fiberboard, medium-density fiberboard and low-density fiberboard. Among them, the nominal density of MDF fiberboard ranges from 650kg m to 800kg m.

The surface of the MDF is smooth and flat, the material is fine, the performance is stable, the edge is firm, and the surface of the board is decorative. However, MDF has poor moisture resistance. In contrast, MDF has a worse grip force than particleboard, and if the screws are loosened after tightening, it is difficult to fix them in the same position.

Generally, the wardrobe cabinet body is made of 18mm thick materials (particleboard, MDF, solid wood board, composite multi-layer board, finger joint board); The door panel (sliding door is made of 9mm wood material "UV panel, double veneer, corrugated panel, louver panel, painted panel" or 5mm glass sliding door; Swing doors are generally made of 16mm or 18mm materials); In general, hardware is matched for wardrobe manufacturers, and they do not produce it. There are also a few businesses that produce their own hardware for wardrobes.

My personal suggestion is to use MDF for wardrobe door panels, multi-layer boards for cabinets, and molded boards are actually based on MDF.

Regarding wardrobe panels, there are generally two types: the door panel (that is, you can meet) and the cabinet (the cabinet itself).

Door panels: particle board (particleboard), MDF (generally MDF), solid wood composite (most sellers in the market will say that it is solid wood, and it is necessary to ask clearly when avoiding the weight and lightness, it may be all veneer, it may be that the door frame is solid wood, and the inner frame is the ...... of MDFSolid wood (i.e. all of it is solid wood. Rubberwood is basically finger jointed, and if you brush it with open paint that you can see the texture of the wood, you will see obvious splicing marks).

Precautions. 1. Always keep the MDF dry and clean, do not wash with a lot of water, and pay attention to avoid long-term immersion of the MDF. If the MDF has oil stains and stains, it is necessary to pay attention to remove them in time, and you can use a household soft neutral detergent to warm the water for treatment, and it is best to use a special MDF cleaning protection solution matched with the MDF to clean it.

Do not use corrosive liquids such as alkaline water and soapy water to contact the surface of the MDF, and do not use flammable materials such as gasoline and other high-temperature liquids to wipe the MDF.

2. It is recommended to place a pedal pad at the door to prevent dust particles from being brought in and damaging the MDF; Overweight items should be placed smoothly; When carrying furniture, please do not drag it, it is advisable to lift it.

3. Please use household detergent to clean the stains and oil stains on the surface of the MDF, and do not use a large amount of water to clean the MDF. If there is a stain on the surface of the MDF, it can be dried with a non-dripping tide mop. If it gets chocolate, grease, juice, drink, etc., just wipe it off with warm water and mild detergent.

If it is contaminated with lipstick, crayons, ink, etc., it can be gently wiped with methanol or acetone.

4. In winter, attention should be paid to increasing the humidity on the surface of the MDF, mopping the floor with a damp mop, and appropriately increasing the surface humidity, which can effectively solve the gaps and cracks of the MDF. If there is cracking in individual positions, please notify the sales unit in time to fill the part. After filling, the surface humidity should be increased appropriately to facilitate the recovery of MDF.

5. The MDF should try to avoid direct exposure from strong sunlight and long-term baking by high-temperature artificial light sources, so as to avoid the surface of the MDF from drying and aging in advance. Keep the windows closed during the rainy season to avoid rain soaking the MDF. At the same time, it is necessary to pay attention to indoor ventilation, dissipate indoor moisture, and maintain normal indoor temperature is also conducive to the extension of the life of MDF.

MDF has the disadvantages of poor moisture resistance, easy loosening, and low strength, so MDF is not good for wardrobe doors compared to other materials.

MDF wardrobes have the advantages of smooth surface and high toughness. But at the same time, wardrobes made of MDF also have the following disadvantages:

1. The moisture-proof performance is poor, and it will expand to a large extent after absorbing water, so the moisture-proof performance is not good.

2. The inside of the MDF is powdery, so the nail grip is not very good and not firm.

3. Because the strength of MDF is not very high, the height of the wardrobe door will not exceed two meters.

4. Because the MDF is made of fibers, we need to use a lot of glue when we produce it, which is worse than other boards, because the glue contains formaldehyde, and a large amount of use will have a bad impact on human health.

How long do MDF wardrobe doors be formaldehyde-free:

MDF formaldehyde wants to be completely released, the process is very long, as little as 3 years and more than 20 years, but as long as the formaldehyde concentration is reduced to the national standard, it will not cause too much harm to the human body. The release of formaldehyde is a long process, in this process, some correct methods can be used to shorten the formaldehyde release time of MDF, which can continue to effectively open windows for ventilation for one to three months.

You can also place some activated carbon packets, and if you use them for a long time, the formaldehyde concentration will be effectively reduced, but the activated carbon must be replaced regularly. In addition, there are green plants, and professionals are invited to professionally remove formaldehyde.

Why are wardrobe doors all MDF pro! Hello, happy to answer your <>

The pro-wardrobe doors are MDF for the following reasons: the international first-line wardrobe brands do not use large core boards, but use MDF. Nowadays, most furniture is made of MDF, mainly because MDF has excellent physical properties, uniform material and no dehydration problems.

The so-called MDF is a wood-based panel, which is made by soaking wood, arboriculture and other objects in water through hot grinding, paving and hot pressing. The cost of using MDF is relatively low and the profit is high. There are also high, medium and low-end furniture, solid wood furniture also has high, medium and low-end, high-end panel furniture is definitely more expensive than low-end real Zheng wood furniture, like some ordinary material solid wood wardrobes, such as fir, pine, and even paulownia wardrobes, ** is cheaper than the general multi-layer board board wardrobe.

In addition to the material, the composition of furniture is also affected by factors such as style, craftsmanship, and brand. I hope mine can help you! Do you have any other questions?

Summary. Hello, MDF is no harm in making cabinet doors. MDF is more suitable for cabinet doors, because MDF is less deformed than particle board.

It is used by many manufacturers to make cabinet doors. The main advantages of MDF are that MDF is easy to finish, and various coatings and paints can be evenly coated on MDF, which is the substrate for paint effect; MDF is also a kind of beautiful decorative board, the surface is smooth and flat, the color is natural and uniform, wood veneer, adhesive film, decorative board, light metal sheet, melamine board and other materials can be glued on the surface of MDF; The hard density board can also be made into a sound-absorbing board after punching and drilling, which is used in the decoration project of the building, with excellent physical properties, uniform material and no dehydration problem.

Hello, MDF is not harmful to make cabinet doors. MDF is more suitable for cabinet doors, because MDF is less deformed than particle board. It is used by many manufacturers to make cabinet doors.

The main advantages of MDF are that MDF is easy to finish, and all kinds of coatings and paints can be evenly coated on MDF, which is the substrate for paint effect; MDF is a beautiful decorative board, the surface is smooth and flat, the color is natural and uniform, wood veneer, adhesive film, decorative board, light metal sheet, melamine board and other materials can be glued on the surface of MDF; The hard density board can also be made into a sound-absorbing board after punching and drilling, which is used in the decoration project of the building, with excellent physical properties, uniform material and no dehydration problem.

Pro, general MDF, formaldehyde content will be higher than other boards, the teacher recommends that you buy brand MDF.