Does the lime falling off the ceiling have anything to do with the inhabitants upstairs?

This doesn't matter much, the house you live in may be an old house, plastered with lime on the wall, lime this thing does not have much adhesion, the strength is not high, the advantage of Wei Yi is how much resistance to water, but when the wall is damp for a long time, because of the constant influence of the temperature and continuous expansion and contraction, so that the lime wall will loosen, and then fall off, if you can keep the temperature at home does not fluctuate much, the air humidity is not large, you can prolong the service life, no wonder the upper can not live people.

The ceiling will fall off and has nothing to do with the inhabitants upstairs, even if the occupants should fall off, it will still fall off, and the main lime guests will be separated from the wall and automatically fall off.

It shouldn't matter, the house itself is fixed. No one will affect your use. Therefore, lime shedding should be more of a quality problem. Of course, if it's been a long time, no matter how good the quality is, it will be weathered, I hope mine can help you.

It doesn't matter if the ceiling is dusty and the upstairs is not lived, it means that the decoration is not well scraped or the product quality is not up to standard.

The lime peeling of the ceiling is related to the quality of construction. As long as it's not a water leak upstairs, it has nothing to do with the fact that people can't live upstairs.

Even if there is a relationship, it is not a big problem, generally speaking, the lime falling off of the ceiling may be related to the temperature and humidity of the powder wall at that time, and it will naturally fall off slowly after a long time.

Hello. The lime from the ceiling came off and had nothing to do with the people who lived upstairs.

Yes. People live, and the breath can enhance the solidification of lime, which is not easy to fall off.

If there are people living upstairs, it should have something to do with the upstairs, and if there are no people living upstairs, it has nothing to do with the upstairs.

It doesn't matter, the quality of the house itself.

It can only be well maintained, to go to simple tinkering.

Some users' old houses do not have suspended ceilings, but simply brush putty and latex paint when decorating, and after a long time of use, there may be a situation where the ceiling wall skin falls off, maybe very little, but also pay attention, because once there is a place that begins to fall off, this phenomenon will quickly spread to the entire ceiling, because the falling place can let the air in, and the moisture will slowly invade from here, so when it begins to fall off, it must be quickly remedied, so how to remedy it?

If the top of the original building is not dry enough, or when brushing latex paint, the putty is not dry to do the paint, which will also easily cause the ceiling wall skin to fall off, it is recommended to shovel off the wall skin and then paint it with an interface agent, then use putty, and finally brush the latex paint, if you are not at ease, you can use exterior wall putty and exterior wall paint, but the effect is not as good as the interior, but it will not shell off when damp.

If it is a problem of construction and materials, brush putty directly on the floor slab, the base must be polished thoroughly, the dust must be cleaned, and the putty can be scraped and leveled only after the good wall is solid. Therefore, it is recommended that there is no need to completely eradicate it, only need to remove the bulging and cracking parts, and other parts that are difficult to eradicate will basically not have other major problems in the future. However, this is limited to a small number of shedding cases, and if the situation is in the majority, inferior materials must be used, so it is best to eradicate them comprehensively.

If the curing time of the base layer is too short, or the water resistance of the paint itself is unqualified or the use is not stirred evenly, and the water is diluted excessively, it will also cause the wall skin to fall off.

Therefore, it is recommended to pay attention to several aspects when decorating:

1. The curing time of the base layer should meet the requirements, and the surface should be dry and clean;

2.To choose the best paint;

3.It should be diluted according to the instructions for the use of the paint, and do not add water at will;

4.It is best to keep the temperature above 10 degrees during construction.

Solution 1.

The lime of the ceiling began to peel and peel off, which was caused by the poor strength. The easiest way to deal with it like yours is to apply a little better construction glue on it once or twice to enhance the strength of the lime, which should solve the problem. If it is your own house, it is recommended to remove the lime layer with a steel brush after shoveling.

Solution 2, 1, use an eraser to wipe in little by little along the edge to easily remove marks. But depending on how sticky you are, it may take a different time. If possible, alcohol + eraser works very well.

2. You can take a dry cloth stained with vinegar to cover the entire double-sided tape traces, and wait until the sticky stains of the double-sided tape are completely soaked, and you can easily remove them with a ruler.

3. You can also use heating to soften the adhesive of the double-sided tape: blow it with a hair dryer to soften the adhesive, and when the adhesive of the double-sided tape becomes weaker, it can be easily removed. If there are still small marks, wipe them off with polish remover that removes nail polish.

4. When purging, whether it is using polishing water or vinegar, it is necessary to completely soak these supplies with double-sided adhesive marks to be easily and effectively removed.

Solution 3.

Chisel first: The perimeter of the falling ceiling must be chiseled within 200 range, and in the process of chiseling, it must not be chiseled by hammering drills and other tools or manual vigorous chiseling. It can only be gently chiseled by manpower so as not to affect the surrounding area.

Then dry: the bottom surface of the original floor slab must be scrubbed with a wire brush, if the surface is too smooth, it must be gently chiseled with a chisel and then cleaned.

Then use cement leveling: use cement oil or 1:1 cement mortar to sweep the hairs in this position. After three days, the cement mortar can be leveled with a strength grade higher than the original design requirements.

Final installation: After a series of preliminary preparations, start to fill the ceiling of the falling place.

Step 1: Caulking treatment: After the ceiling is cleaned, fill the slab joints; Seam treatment: Add seam tape to the seam surface. 

Step 2: Wood board special putty interface processing: thin scrape "board worry-free putty" 1 time. (This step is more important, the board can not only be firmly glued to the wood layer, but also its surface can be well covered by the new putty powder bonding, with two-way affinity of the material).

Step 3: Scrape the "water-resistant putty" 2 times normally, and polish it with fine sandpaper after the second time it is dried and solidified (note that the construction of each putty should not be too urgent, and the second time is easy to scrape the first putty when it is not dry).

Step 4: The final finish can be interior paint, wallpaper, etc.