What should I do if the balcony double glazing fogs?

Nowadays, more and more families will be more willing to choose double glazing when installing window glass. Because double-layer glass is superior to ordinary glass in terms of sound insulation and heat preservation. However, after using it for a long time, we will find that water vapor is generated between the two layers of glass, which not only affects the appearance but also hinders our vision.

Let's first take a look at the cause of water vapor generated by glass lamination: everyone knows that the sealing of double glazing relies on sealant.

Finished. After the sealant has been used for a certain number of years, its sealing effect may not be so good, and water vapor will naturally enter the interlayer. Another reason is the desiccant inside the frame.

After a long time, it expired. <>

In fact, to fundamentally solve the problem of air leakage of double-glaze, of course, it is to replace it with a new one. But this is a new one, one is troublesome, and the other is not low. So if you want to solve the current problem first, then the following methods can be recommended to you. <>

Now that water vapor has been generated, we need to get rid of it first. The sealing strip can be removed and the water vapor can be evaporated by the heat of natural light; Or after the seal is removed, use a hair dryer.

Blow to the side to let the vapor run down the water. Then attach the sealing strip. After installation, it is best to use glass glue again.

Put all around to make the seal better. In addition, there is a rough and effective way, which is to remove the glass directly, remove the sealing strip, and then clean all the sealing glue on the glass, and wipe the inside of the glass with a cloth, preferably with alcohol. Then ensure the dryness of the glass, install the glass on the window frame, it is best to add moisture-proof strips to the edge of the window frame, fix the glass with sealing strips, and finally use glass glue to put a layer of glue around to ensure its tightness.

If the windows of your house are originally double-layered, then this is under the management of the property and you can find the property to deal with it. If you install it yourself, if you want to ensure the use of double glazing, it is best to find a professional to help you change the glass.

The above is the treatment method of water vapor from double glazing, I hope it will help you.

Then you can turn on the indoor air conditioner, let the water vapor in the air evaporate, and the fog will disappear.

Buy a double-glazed wiper. This item is designed for double-glazing and keeps the glass clean.

The sealant on the insulating glass can be removed with a tool, and the glass window can be cleaned again, and after it is dry, the glass sealant can be painted. You can leave the window open for a while to make the temperature difference between indoor and outdoor smaller, until the fog dissipates.

Car glass is easy to fog, teach everyone a good way.

1. If there is fog on the glass, we can use a towel to wipe the fog, and then open a small crack in the glass to let the outside air flow indoors, which can effectively help us solve the problem of fog on the glass.

2. You can also buy some anti-fogging agent to apply on the glass, if the glass is fogged, we can use a dry towel to wipe all the fog on the glass, and then apply the anti-fogging agent to the glass window, which can maintain the glass fogging problem for a long time.

3. Put dish soap and soap in water, wait for the two to melt, soak them with a rag, and wipe the fogged glass, which can prevent fogging from happening again, because soap and dish soap will generate a film on the glass, which can be used instead of anti-fog film, and this method is also very easy to use.

The reason should be that it is winter, and then the outdoor temperature is lower than the indoor temperature, and there is a lot of water vapor in the air, and then because of the temperature difference between indoor and outdoor, it liquefies into small water droplets attached to the glass.

Method: I think it is possible to open more windows to convection the air. Or use the laundry or hand sanitizer or detergent at home to flush the water, then use a cloth dipped in the glass to wipe the glass, and then use a dry cloth to wipe off the remaining water and traces. It should be better this way.

If the balcony double-glaze fogging is fogged, you can find the manufacturer to replace the glass, or find a maintenance person to repair it on site.

For double or multi-glazing installed in the home, one of the most common problems is fogging inside the glass if the quality is not up to standard. In severe cases, water may ingress.

The so-called finding a manufacturer to replace the glass means that after we find that the double-glazed glass of the balcony is fogging, we can find a glass manufacturer. Usually the first thing they need to do is to replace the glass. This is also the most common way to deal with glass fogging.

Or just find a professional window maker or installer to deal with it on site. <

For the double glazing that appears behind the home, we must not deal with it blindly. Because there are a lot of ways to inflate in the middle of double glazing. Examples include the most common double-walled vacuum glass, argon filled glass, and ordinary air. So we should treat different situations differently.

When we buy double glazing, we have to ask what kind of gas is filled between the door glasses. It's also convenient for us to fix glass problems.

If the new windows in our home are double glazing, we must carefully check the specifics of the double glazing. Because double glazing is actually made of single glazing. Therefore, it is likely that there are some quality defects.

We focus on inspecting the inside of the glass for scratches and for fog inside the glass. <>

For double glazing, the sealant around the glass should be carefully inspected before installation. Qualified double glazing has a uniform sealant around Anji. If you find that the sealant around the double glazing is uneven, or there is a glue opening, it must be stopped in time. It is not recommended to install such glass.

Conclusion<>

For double glazing that is often used in the home, we must pay attention to some of its common cases. For example, the problem of fogging up of double glazing is very common. Therefore, it is recommended that the double-glazed plastic steel windows or broken bridge aluminum alloy windows purchased by our company should also be carefully inspected before installation.

After installation, check again. This ensures that our windows are qualified.

When the double glazing on the balcony is fogged, it may be a problem caused by unqualified quality. At this time, it is necessary to clean up in time, so when buying glass, it is necessary to prevent water ingress and buy some first-class glass to avoid the problem of glass fogging.

If the balcony double-glaze fogging should consider whether it is the middle fogging, if it is the peripheral fogging, wipe it with a rag, now there are many tools to clean up the fog, and it is more convenient to use, so the effect of defogging is better. When there is a problem with the quality of the glass, it must be repaired, and many double-layer glass will fog in the middle, so it should be replaced in time, and the glass can be replaced by the manufacturer, because this is a glass quality problem. First of all, we need to look at the quality and processing of this kind of glass, and then replace it in time to solve the problem of glass defogging.

Now there are also many professional defogging personnel who can find professionals to check and understand the situation of the glass out, and then remove the glass for reinstallation or the pressure strip inside is damaged, so as to replace it. Also check the sealing of the double glazing, if there is sealant around it.

You can place some aluminum strips on the periphery and then open the glue can not be used again, to replace it in time, to repair the condition of glass fogging, it is necessary to glue the glass in advance.

Remove and re-seal so that there is no fogging.

And the treated glass should also be sealed with glue in advance, so that it can be installed and used for a period of time can be observed, the effect must be selected first-class glass, otherwise it will affect daily life, because after the double-layer glass fogs up, it is difficult to clean up in the middle, which will affect people's sight. When buying this kind of glass, it is also necessary to understand in advance what kind of gas is filled in the middle, so as to carry out the correct maintenance, so the quality of the glass needs to be guaranteed, so as to be able to find the right solution.

First of all, you can check whether it is the fogging of the glass caused by the temperature difference in the room, and then check whether it is the fogging caused by the problem of the sealant, if so, you can remove the glass, open the sealant to wipe the fog inside, and then reseal.

You can replace the glass from our glass manufacturer, find a professional maintenance personnel to deal with it, or you can remove it by adding a sealing strip yourself, and then wash the glass and brush it with sealant.

In this case, it is still relatively difficult to solve, and you can ask the relevant personnel to remove and clean the middle glass, or wait for it to subside naturally, which takes a long time.

You can properly open the window for ventilation, but also pay attention to the effect of the sealant, if the sealant is aged, it should be replaced in time.

What to do if there is water mist in the middle of the double glazing of the balcony! Hello, I am glad to answer the <> method of dealing with water vapor and fog in the middle of the double-layer glass: 1. The fogging of the double-layer glass is the cracking of the sealant, but the water ingress is not only the problem of cracking, but also because the sink is not opened on the profile during installation, or the sink has been blocked.

If the water level is already higher than the profile below, there is a chance that water will leak in from above (which is rare), and in any case the glass will need to be pulled apart and redone. It's okay to find someone to install it (if you spend your own money, you don't need to replace the whole piece of glass). Many people encounter this problem, when the sun radiates when water enters the two layers of glass, fog rises inside.

If dust gets in, it will have a great impact on its lighting and aesthetics. 2. When the double-glazed window is installed, its construction technology is not good, after the double-glazed window is used for a certain period of time, the sealant cracks the phenomenon, resulting in water vapor entering the interlayer of the double-glazed window, with the increase of temperature, the water vapor evaporates, and when the double-glazed window is in contact, it becomes a small water droplet, which leads to the phenomenon of double-glazed fogging. When the double glazing is installed, its sink is not properly installed, causing its water level to be higher than the profile, which causes water to flow into the interlayer of the double glazing.

Under the irradiation of sunlight, the water evaporates to form fog, which causes the fogging phenomenon of double glazing. 3. If the partition strip in the double-glazed window is installed, a glass gasket can be added to the double-glazed window. Remove the original septum on it, and reinstall the partition strip, pay attention to the pasting position of the septum strip and the edge part of the glass window to maintain a certain distance, generally 2-mm is the most suitable.

And when installing glass windows, be careful not to get water on the septum, so as not to affect the installation quality. 4. If the fogging phenomenon is caused by the temperature difference is too large, the window can be opened for a while to make the temperature difference between the inside and outside of the chamber smaller, until the fog on it dissipates. 5. When the water mist is just formed, the glass can be disassembled, cleaned with diluted hydrofluoric acid, and then re-hollow treatment.

6. After the formation of water pin fog for a long time, it can only be replaced with a new insulating glass, because the glass has deteriorated at this time and cannot be cleaned and cleaned. 7. Double-layer vacuum glass has the effect of isolating noise, and there is water mist phenomenon in the double-layer insulation glass interlayer, indicating that the glass sealing performance is not good, and air infiltration will also affect its performance. Hope mine can help you <>

Do you have any other questions?

What causes balcony wall-mounted glass to fog? Kiss! Hello, I am happy to answer the reasons for <> for you as follows:

1. The drainage design of the window is unreasonable, and the air pressure balance hole and drainage hole are not opened or the water cannot be discharged, and the water vapor enters the glass interlayer after evaporation for a long time to produce fog. 2. The installation position of the separator is unreasonable. The septum is glued along the edge of the glass, causing the septum to come into direct contact with the rainwater, and when the water is adsorbed, water vapor is generated between the glass.

3. The overall sealing of the glass is not tight, the sealant on all sides is uneven, and there are places that have not been glued, I hope my Huixiang Qinga can help you <>

Do you have any questions about its return?

Summary. Hello dear! The balcony is double-glazed and the outer glass fogging is where the warm and cold air meet.

1. Sealant cracking: During the installation of double-layer glass, if the construction process is not in place, after a period of use, its sealant will crack, causing water vapor to enter the glass. As the temperature rises, the water vapor will slowly evaporate, and eventually fogging will occur.

2. The sink is not installed: when installing the double glazing, if the sink is not installed, then the rainwater will flow into the glass interlayer in rainy days. In this way, when sunlight hits the glass, the water inside evaporates into a mist.

3. Unreasonable installation of the middle spacer: If the installation of the double-glazed middle spacer is unreasonable, there will also be fogging. Because the septum is glued along the edge of the glass, if there is no gap, it is easy to come into contact with rainwater, and after the rainwater is adsorbed, the glass will form a fog phenomenon.

Hopefully, this service will help you <>

<> you can click on my avatar to follow me, and if you have any questions in the future, you can consult me again, and look forward to serving you again. Wishing you well; Have a good life and all the best! If you are satisfied with my service, please give a thumbs up<>

Once again, I wish you all the best! Peace and joy.

What is the cause of fogging of the balcony double glazing outer glazing.

Is it normal to find fog outside the glass of the balcony sliding window that has just been installed?

Hello dear! The balcony is double-glazed and the outer glass is fogged up, and the air meets the warm and cold. 1. Sealant cracking:

In the installation process of double-layer glass, if the construction process is not in place, after a period of use, its sealant will appear to crack the sun, causing water vapor to enter the glass. As the temperature rises, the water vapor will slowly evaporate, and eventually fogging will occur. 2. The sink is not installed

When installing double glazing, if the sink is not installed, the rainwater will flow into the glass interlayer on rainy days. In this way, when sunlight hits the glass, the water inside evaporates into a mist. 3. The installation of the middle spacer is not reasonable

Double-glazed separators, if not properly installed, can also cause fogging. Because the septum is glued along the edge of the glass, if there is no gap, it is easy to come into contact with rainwater, and after the rainwater is adsorbed, the glass will form a fog phenomenon. Hopefully, this service will help you <>

<> you can click on my avatar to follow me, and if you have any questions in the future, you can consult me again, and look forward to serving you again. Wishing you well; Have a good life and all the best! If you are satisfied with my service, please give a thumbs up<>

Once again, I wish you all the best! Peace and joy.