When the old house is renovated, should the old floor tiles be removed and the new floor will be lai

After living in this house for a long time, they all wanted to redecorate and live in a different style. In particular, many people want to replace tiles on the ground with wooden floors. Three suites were installed, telling you that, in fact, there is no need to remove and replace them if the tiles on the ground are intact.

You can lay the wooden floor directly on the tiles. There are many issues to consider in the renovation and reconstruction of old houses. In general, owners do not change what they can use at home.

If they can save some, they can save some, such as flooring, floor tiles.

Wait. We can't remove the floors and tiles when we renovate, and it costs less to remove.

In general, there are two ways to replace the floor tiles, one is to remove the floor tiles and then lay the wooden floor again, and the other is to lay them directly on the floor tiles. If the original tile floor is uneven and sloping, it cannot be laid directly. It needs to be removed.

The specific treatment method is to dismantle - level - lay the floor. Regardless of whether the old tiles should be removed, we should also measure the threshold height of the new gate. After the new flooring is laid, the floor elevation will occupy a significant floor height.

Before the new floor can be laid, all the original bricks must be removed. The demolition project is very troublesome, plus a lot of friends, this is the first time to renovate.

In order to avoid this situation at home, before removing the floor tiles, we must first communicate with the construction team and whether it is necessary to remove the floor tiles laid at home; We should also communicate with the master who lays the floor, and finally measure the height of the threshold. The practice of laying wooden floors directly without removing the tiles saves the money brought by the two processes of removing the tiles and leveling the ground. In addition, the construction efficiency is higher, which shortens the decoration construction period.

This should be very convenient for those who need an emergency check-in or for office workers! Laminate flooring is recommended.

First of all, it is cost-effective. In addition, laminate flooring is usually thinner. In addition, before laying the floor, it is better to lay a moisture-proof film on the tiles, which will not only prevent moisture, but also allow the floor heating temperature to cool down more slowly if there is underfloor heating.

If your home has not been renovated for several years, and there is no obvious wear, deformation, mildew, etc. on the floor, it is recommended that you do not need to replace it directly. Just find a flooring manufacturer to renovate. It should be noted here that the surface of the old floor needs to be sanded when it is renovated, but if it is laminate flooring or laminate flooring with a surface thickness of less than 4mm, it cannot be sanded, which will destroy the wear-resistant layer of the floor surface and reduce the service life of the floor.

The old floor tiles must be demolished and then the new floor tiles are not possible to lay the new floor tiles on the old floor tiles, which is not very good, and it is particularly easy to cause our floor to be uneven.

It is recommended to remove the old floor tiles and then lay a new floor, otherwise the floor will be uneven, and it will be affected by later living.

If the old floor tiles are not very good, they need to be removed, depending on the layout of the old house decoration and the decoration of the old house.

If you don't want to remove the old floor tiles, can you put another layer of floor tiles on top?

No, now many people want to save their budget and settle the decoration time by themselves when decorating. Therefore, when many people buy a second-hand house, for example, they want to redo the tiles when they have tiles on the ground, but they don't want to put all the tiles on them. Then at this time, it is desirable to be able to lay a layer of tiles directly on top of the original tiles.

Such a statement sounds strange. In real life, few people would choose to do so. Although it sounds simple and can save money and budget to a great extent, it faces many problems in the process of using it later.

Extended information: First of all, when pasting tiles, one of the problems to be paid attention to is the degree of combination between the tiles and the ground, because if the tiles are firmly connected to the ground, then in the subsequent use process, the tiles will not fall. Because the tiles are very frequent in the subsequent use process, plus they need to be used every day.

So if it falls, it will make you face a lot of bad situations in the future use process. Therefore, when pasting tiles, higher requirements will be put forward for the degree of adhesion, so that they can be firmly bonded to the ground, so as to ensure that the tiles are in a more solid state. But if it is directly on the original tile, this degree of bonding will not be enough.

How to remove old floor tiles.

1.The demolition of the floor tiles of the old house can be divided into two situations, one is to remove the original floor tiles, and the other is to directly lay new floor tiles on the surface of the old floor tiles. In addition, the floor tiles should be renovated to pay attention to the level of the ground and the raised ground height.

2.Remove the old bricks: if the old bricks are partially damaged, empty or falling, and the enamel surface is worn or dirty, it is recommended not to remove them and replace them, just repair them; If you only consider replacing some old bricks, it will be a great difficulty, because after many years of use, it is likely that you will never find the same color of floor tiles again, and using other colors will affect the effect very much.

3.Direct laying of new floor tiles: There are also some brick wall renovation materials on the market, including floor tile surface treatment agents, floor tiles and mosaic adhesives, which are relatively easy to use and stronger, and can be directly applied to old bricks; In addition, laying new floor tiles on the surface of the old bricks can save time and effort.

<> can. Knocking out the floor tiles and resurfacing them will make the newly applied floor tiles stronger. However, it is necessary to pay attention to removing and resurfacing the floor tiles

First, first of all, find a suitable location for the demolition work, it is recommended to choose the location of the staggered layer between the floor such as the toilet and the door, but in the process of demolition, you need to pay attention not to touch the heating pipe, water pipe and other pipes, and pay attention to turn off the electric switch, etc., to prevent accidents caused by the demolition work. 2. When removing the old floor tiles, pay attention to remove the cement layer under the floor tiles until the original plastering layer is exposed. Third, when laying new floor tiles, the ground should be paved first, and professional workers can be asked to deal with it.

The newly laid wooden floor should be waxed immediately, and the floor joints should also be sealed with wax.

Waxing prevents moisture from entering the solid wood floor and prevents dust from entering the knife edge. After waxing, it is necessary to cover and protect it with film, etc., and then arrange the tail opening, and consumers should be reminded here that the wax of some cleaning companies is not used properly, which will react with the quality of the paint on the surface of the floor, resulting in discoloration, so it is necessary to choose carefully.

Individual seriously bulging or damaged tiles need to be removed, after shoveling, repair with mosaic surface tile surface treatment agent, and after the surface of the old tile is as smooth as the old tile, then paste the new tile with tile adhesive, which is more firm.

I was going to redecorate my house, and although the original kitchen and bathroom floors were tiled, I still wanted to change the style. However, seeing that the tiles did not appear hollow and cracked, I felt that it was a pity to remove them! I heard that you can directly lay new tiles on top of the old floor tiles, but I don't know if it will work?

It works! However, there are still two scenarios.

For floor tiles, this is perfectly fine! But the premise of directly laying new tiles must meet the following conditions:

The old floor tiles do not have large areas of hollowing and cracking;

The glazed surface of the tile has no obvious damage and warping;

The drop of the ground flatness is controlled within 3mm.

If the old floor tiles meet the above conditions, they do not need to be removed! Think about the labor cost of removing tiles, which can also save a lot of money

There is still room for discussion about floor tiles, but if it is wall tiles, this practice is not counted. What's with? Because the glaze of the tile is relatively smooth, if the tile is directly laid on the top, there is not enough adhesion between the two, and under the influence of gravity, the tile is easy to loosen and fall off.

What about laying new tiles directly on top of the old ones?

We know that there are two commonly used methods of tiling: cement mortar and special tile adhesive, in the process of transformation, considering the adhesion strength between the tiles, it is recommended to use tile adhesive, the impact is relatively small.

Here's how. Clean the surface of the old tile first, then use tile adhesive to make a layer of foundation painting on the old tile, and apply a layer of adhesive to the back of the new tile (the thickness of the application only needs to cover the texture on the back), and then you can directly apply the new tile.

Then use a rubber hammer to gently tap the edge of the new tile to make local adjustments, here pay attention to reserve a certain gap space (tile expansion joint), wait for 24 hours after the adhesive is dry, and use the grout to finish the seam to complete!

Finally, I want to say that although there is no problem with this practice, you should know that the old tiles have already taken up the height of the space, and adding another layer will take up an additional 4-5cm, so you should think carefully before doing it.

Yes, but to lay another layer of sand sauce cement and then floor tiles, I feel that the floor is lower.

Yes, our family bought a second-hand house in the decoration if the floor tiles are removed to thousands of dollars, this is the cost of working hours and transportation of construction waste, and later discussed with the decoration master whether it is possible to directly lay the wooden floor, the decoration master said no problem, you directly paved on the line, and now the floor is so flat and saves money on other materials, and you do not install floor heating, so we directly lay a layer of wooden floor.

For the overall effect and later service life, it is recommended to dismantle the shop.

No, it should be changed.

According to your description, this situation is not possible, and it is recommended that you remove the old floor tiles before putting on the new tiles.

First of all, the condition for not dismantling the old floor tiles is: the old floor tiles do not have a large area of hollowing, warping, etc., and the flatness must meet the requirements of the wooden floor (the difference in the flatness of the ground is not more than 3mm), so that the new floor tiles can be laid on it.

After the old floor is removed, how to deal with the floor tiles to be laid with new floor tiles?

Hello, if the old floor is removed, to lay new floor tiles on it, the ground can be seen to see if it is uneven, if it is not leveled, generally after leveling, grinding will be able to re-lay the new floor tiles on it. There is no need to deal with it when there is a slippery swim, and it is OK to pave the floor tiles directly with cement mortar, but it must be paved after paving.

Summary. Hello dear. If you want to directly pave the new tiles on the old floor tiles, this method is completely OK, but you must meet these conditions, the first is that the old floor tiles do not have a large area of hollow cracking, the second is that the old floor tiles have no obvious damage and warping, the third is that the drop of the ground flatness can be controlled within 3mm, if these conditions are met, then there is no need to remove the old floor tiles, think about the labor cost of removing the tiles is still relatively expensive, This will save you a lot of money invisibly.

If you don't want to remove the old floor tiles, can you put another layer of floor tiles on top?

Hello dear. If you want to directly pave the new tiles on the old floor tiles, this method is completely OK, but you must meet these conditions, the first is that the old floor tiles do not have a large area of hollow cracking, the second is that the old floor tiles have no obvious damage and warping, the third is that the drop of the ground flatness can be controlled within 3mm, if these conditions are met, then there is no need to remove the old floor tiles, think about the labor cost of removing the tiles is still relatively expensive, This will save you a lot of money invisibly.

When the old tile is paved with new tiles, it is necessary to use tile adhesive, it is a powder adhesive, containing a certain amount of formaldehyde, do not move in in the short term after use, otherwise formaldehyde will harm our body, I hope you can keep in mind this, of course, if the floor of your home is relatively low, or want to pave new tiles on the old tiles in the bathroom, then it is not recommended that you use this renovation method, because the low floor and the bathroom are relatively wet, after the new tiles are paved, The moisture of the old tiles is not easy to dissipate, so that the new tiles will be hollowed out or even fall off after a long time.