What color is used in the middle of red and white tiles?

The middle of the red and white tiles can be transitioned with orange, because the difference between red and white is relatively large, and the color changes from light to dark with orange.

Between red and white, I think if you want to go overboard, you can choose semi-gray, this color will be relatively good.

The process of home decoration is complex and diverse, the choice of tile color is particularly important, when choosing the color of the tile, it is necessary to decide according to the overall home style, such as modern simplicity, new Chinese, simple European and other styles on the basis of making a reasonable match. Then choose the color tone to choose, the most classic and commonly used black, white, gray, beige is the more natural and soft representative of warm colors.

Below, Dongpeng Jun takes these colors as an example to introduce some matching skills to you.

White smoky rain stone.

The soft texture and light fine lines make the three-dimensional effect of condensed white present, and the feeling of smoke and rain in the south of the Yangtze River is looming.

Applicable style: modern and simple, new Chinese, simple European.

Applicable places: living room, dining room, bathroom, kitchen, public place.

If the color of red and white tiles is jumpy, you can use pink or light blue to make a transition, which will be much better.

In the middle of the red and white tiles, I think this color is better if you have a pink class, and if it is black, it is not good, too much.

Hou white tiles in the middle with color transition, when you buy tiles. Then the boss is more professional, and there should be many styles for your reference.

What color is the brick.

With burgundy--- there is a little purple, which is more gorgeous, and it combines red enthusiasm with black oppressive burgundy, and regrets.

It is often regarded as a noble color in religion, a symbol of supreme authority. People who like to drink early and have a red Lu Sen tend to have a traditional and classical family, are conservative and know how to control people, and are very strict with themselves.

If you don't tear down the door and it's not on a plane. The effect will be better with two kinds of bricks, and I plan to remove the balcony door in the near future and now the ground inside and outside is flat, you can consider the same color of floor tiles, and then directly use a piece of marble to overdo the groove under the door.

There must be a height difference between the living room and the balcony floor, and you can use different colors of floor tiles to make a grid (commonly known as a doorway stone).

Gypsum board, preferably with relief, the background wall is also more suitable, try to choose a light color of the wooden background wall board, solid wood and composite solid wood is ideal, you can try to use and tile color similar to the board, it is best to have a special texture on the surface, in general, your house style is based on simple style, try to avoid the use of too complex color board.

From 3@3@3@build@material@net.

If you want a natural transition between colors, you need to use some intermediate colors for the transition. Color blending is to a large extent the spiritual place of interior decoration planning. No matter what kind of decoration style, it needs to be done through color matching.

Among the many decorative considerations, interior color matching techniques are more important. The younger brother will next introduce some common knowledge about indoor color matching skills.

The first is the color distribution, some people say, "red and green can go hand in hand", in the same space, the color distribution is not coordinated, which makes people feel uncomfortable. Therefore, if you use multiple colors in the same space, you have to pay attention to the change in tone. Generally speaking, when the contrast of various colors is very strong, it is necessary to mix a color into each color so that each color contains the component, so as to weaken the strength of each color and achieve the purpose of enhancing harmony.

In the color planning of home decoration, white harmony is often used to reduce the intensity of various colors, increase brightness, and make the colors of the whole space harmonious and natural.

Also of particular importance is the color transition, when decorating a home, the colors around the interior space cannot be exactly the same. Therefore, when one color surface is converted to another color surface, the color in the middle of the two colors needs to be used for the conversion to prevent the color from changing stiffly and causing undesirable feelings.

For example, from a red floor to a yellowish wall, there should be a skirt and skirting boards of intermediate color so that the color can smoothly change from bright red to pale yellow. On the same façade, it is also necessary to make color conversions according to the strong sections. For example, when a predominantly black ** is hung on a white wall, a purple or gray frame or moldings are needed for the transition.

In home decoration planning, the application of various decorative lines first plays a role in color transitions.

The color should be fine, not bells and whistles, not all at once from white to black or red.

It is best to choose a relatively similar color as a choice, if it is a warm color, such as white or warm yellow to match.

It's best to use black and white over, as it looks more minimalist and atmospheric.

It's just that the color doesn't have any color, it's best to have one color, if it's a warm color, then it's all warm.

Be sure to choose a light-colored color, otherwise it is unlikely that there will be excessive links to be eliminated.

Don't change colors too much to make the transition, you can't change from red to green all at once.

It is best to choose a similar or the same kind of color to decorate, and the most important thing is to match reasonably.

Most of the houses now are beige white, gray, clean and stable.

Slowly transition between light green and white with lighter greens and whites.

When choosing floor tiles, it is important to consider the following aspects: First, it depends on the brand. Only well-known brands of floor tiles, the quality of their building materials can meet the national standards, and the content of harmful substances can be within a safe range.

Second, it depends on its anti-pollution ability, if the family is very busy and can only clean once in two or three days, then choose the one with better anti-pollution ability. Third, if there are elderly people and children at home, you must do a slip resistance test when purchasing.

Specifically, the selection of floor tiles can start from the following aspects:

1.To see if the color of the tile is pure. Mainly observe whether the color of the back of the tile is uniform and consistent.

2.It is necessary to observe whether the particles of the cross-section of the tile are fine. The cross-section here does not refer to the cutting surface around the tile, but to the fracture of the tile fragment.

Generally speaking, the fracture is fine, hard and brittle, and the color is the same. Because the ceramic tiles with fine particles have strong waterproof ability, while the tiles with large particles are easy to soak in moisture, which affects the quality.

3.Pay attention to the thickness of the glaze layer. The thickness of the glaze layer is the thickness of the cross-section of the glaze. Glaze is the most expensive material in the cost of ceramic tiles, and the thicker the glaze, the better the quality.

4.To listen. Tap the tile to pay attention to whether the sound is crisp, such as the sound is clear and pleasant, such as the sound is dull, it is inferior.

5.Test the waters. Consumers can pour some water on the back of the tile and pay attention to how quickly the tile absorbs water. After a few minutes, see if the marks left by the water on the front are obvious. The density of tiles that infiltrate slowly after the water disperses is large, and the marks left by the water are not obvious, so they are regarded as the top grade.

6.Warp. Take two bricks back to back and face to face to see if they can be in close contact, and there is no phenomenon that the gap is too large to judge whether there is warping.

7.Infiltration. Find ink to apply to the surface for 1 hour and then scrub to see if there are traces, no traces are good bricks, and those that have infiltration are resolutely not selected.