Is Binrui rusty common, and what is the quality of Binrui

Rust is common and easy to rust. The body of the Binrui model is rusted, mainly in the welded bits under the doors, the hood and the trunk, for the Emgrand.

For this popular model, which often sells more than 10,000 per month, the hundreds of complaints seem to be a bit insignificant, and they have not affected sales at all.

How to deal with Binrui rust

Clean the rust on the surface first, spray it with self-spraying varnish to prevent rust, or you can remove it and take it to electroplating and painting, remember to check it from time to time to see if there is a similar situation, if there is slight decay, you can choose gas welding.

Repair, if the rust is serious, replace it, cleaning the surface of the rust spray paint is not a long-term solution.

The appearance of the body is often rusty, which is mainly caused by direct contact between the sheet metal and the outside world, in addition to the common reasons for the collision scratch rust after long-term parking, there is also a situation that when driving, the small stones bounced up by the tires of the front car caused by the point collision, which will cause the paint surface to peel off one by one, resulting in small rust spots.

Binrui rust is widespread. The rusty parts are mainly concentrated in the four doors, and the solution given by the manufacturer is to replace the doors free of charge during the warranty period.

Methods of rust prevention in automobiles1. Check the humidity of the place where it is easy to accumulate water.

For the inner and outer edges of the wheels, the bottom corners of the doors and trunks, the keyholes of the doors and the moving parts of the wiper racks, etc., it is necessary to check frequently, and at the same time, keep the drainage holes of the doors and body parts unblocked, and check the humidity of the covering in the car.

2. The soft lacquer surface is used as a sealing glaze.

It can seal the glaze on the car body, which can form a solid protective film in the form of a network and improve the hardness of the paint surface.

3. It's best not to cover the car clothing.

If the vehicle is parked outdoors, if it is windy and rainy, the inner layer of the car coat will repeatedly whip the car paint, especially if the wind and sand blow into the car coat, it will scratch countless small scratches on the car body, and the paint will be blackened for a long time.

The reasons why it is not recommended to buy Binrui COOL: the bumps are obvious, the space is small, and the paint is thin.

In terms of comfort, it is very poor, the tuning is on the hard side, and the bumps in the road are obvious. The space in the rear row is very small, the trunk opening is small, it is very inconvenient to put things, the paint is also very thin, and a small branch is slightly scraped to make it bigger, which is an obvious trace.

Things to keep in mind when buying a car

1. The first step in buying a car is to choose the model and the configuration to be purchased. When choosing a car, you should first determine what type of car to buy according to your budget. Then consider the sensitivity of several other parameters, such as fuel consumption, maintenance costs, space, noise level and loading capacity.

2. In terms of configuration selection, you can consider your own needs. But you also need to determine the necessary configurations, such as sunroofs and so on.

3. After selecting a few models of your favorite models, you can go to the 4S store to see the car and take a test drive. When you take a test ride, you should slide to see the details of the car, such as space, interior style, whether the seats are comfortable and storage space, etc., and you can experience the power, comfort, silent noise reduction performance and other aspects during the test drive.

Hello dear, <>

I'm glad to answer for you, it is not recommended to buy Binrui for many reasons, such as abnormal brake noise, decent space, insensitive power response, simple car function, obvious suspension beating, small rear space, high fuel consumption, abnormal noise, unsatisfactory suspension performance, gearbox shift frustration, these are unbearable. Geely Binrui, as a compact family car under Geely, focuses on high quality, but in the actual use process, the quality of the model is very average, the quality stability is relatively poor, and there are often many small problems, and the price of Geely Binrui this car is relatively high and cost-effective, so it is not recognized by consumers and the market. <>

Three-cylinder engine. Binrui overall strength is not low, but because of the full range of three-cylinder reasons, users see daunting, Binrui equipped with a 6-speed dual-clutch gearbox will still have frustration, especially in the low speed of the second gear to the third gear, the frustration is obvious. Secondly, in order to achieve the ultimate fuel economy, Binrui will cut off the clutch when the vehicle is coasting, although the fuel consumption is reduced, but when you give fuel again, the clutch needs to be combined again, which will also increase the frequency of frustration.

The following should be paid attention to when driving during the run-in period:

1. During the run-in and maintenance of the new car, the oil, coolant, and battery electrolyte should be checked frequently to see if they are sufficient, and they must be replenished in time if they are missing.

2. Do not drive with full load, the various parts of the new car are just processed, the run-in period of the new car will produce a lot of debris in the engine, and the shock absorption system of the new car, the transmission system and the brake system are all new parts, the joint part of each other is not very tight and smooth, and the full load exercise will cause damage to the engine and other components due to excessive load.

The above content refers to Encyclopedia-Binrui.

Because it is a three-cylinder engine, the power is relatively weak.

The model focuses on youth, fashion and sports, and a total of 7 models have been launched, with a guidance range of 10,000 yuan. Geely Binrui will be offered with two powered engines, and will also be available in seven body color options.

Appearance: Geely Binrui, as the first sedan under BMA's global modularization, made a new appearance in 2018! Geely Binrui adopts the latest generation of family-style front face shape, with a galaxy echo front grille and double C air intakes, headlights integrating high and low beams, and LED daytime running light strips.

From the side, Geely Binrui adopts a fluid body design that runs through the shoulder line of the front face.

Binrui is of good quality

**Compared with the real grandson, the performance is very practical in all aspects, and the market sales are very high. The most satisfying thing for Geely Binrui is the comfortable handling performance.

Not only is the chassis well-tuned, but the interior is also spacious and comfortable. Although the suspension shock absorption is uncomfortable, it has rich power performance, relatively low fuel consumption, and high cost performance.

Spatial Measurements:

This compact car from Geely Binrui has the structure of a 4-door, 5-seater sedan. After the 178cm tall experiencer adjusts the front seat to the lowest, the headroom is 3 fingers, the front row remains the same, and the rear row has 2 fingers of thick headroom and more than 2 fists of legroom. The rear legroom is very generous.

For specific size parameters, please check the body size of Geely Binrui.

Binrui steering wheel adopts a flat-bottom shape, the feel is also very good, and the multi-function buttons on both sides are fully functional, which can control functions such as multi-** and vehicle driving assistance systems. The vehicle features a 7-inch full LCD instrument cluster that can switch the background color according to different driving modes.

Summary. Kiss! The reasons why it is not recommended to buy Binrui are as follows: 1. There are more choices of models of the same level; 2. The car is updated quickly; 3. The space is relatively small, and after comprehensive consideration, it can be concluded that it is not cost-effective to buy Binrui, but this is only a suggestion and does not represent all consumers.

Kiss! The reasons why it is not recommended to buy Binrui are as follows: 1. There are more choices of other models of the same level of liquid liter combustion; 2. The car is updated quickly; 3. The space is relatively small, and after comprehensive consideration, it can be concluded that it is not cost-effective to buy a colorful Xurui, but this is only a laughing suggestion and does not represent all consumers.

1, the same level of the family to choose more and spike bend Binrui at the same level of the model choice too much, if you particularly like Binrui, it is completely according to your own preferences, but you can take a look at more, the same level of models in the market performance is more excellent, so, when choosing, to consider according to many factors, 2, the car is more state posture new generation fast car market replacement is very fast, look at Binrui may be very good, but then look at other models, found more good-looking excellent, so, Whether to buy or not depends on the consumer's love. 3. The space is relatively small, Binrui is a compact SUV, for home use, the space is relatively small, because of the opening of the three-child policy, the best general vehicles are basically going to the large space, so the Binrui is a little too small.

Hello dear! It is not recommended to buy Binrui, because Binrui's ** is not advantageous in the same level of car, and Binrui's performance space is not advantageous in the same ** car. In addition, in 2019, when Binrui was listed, all the vehicles with the configuration were taken off the shelves, and there is only Binrui on the market at present, which cannot meet the needs of many consumers, so naturally many people do not recommend buying Binrui.

Reason for the failure: Binrui's voice recognition system is not very intelligent It may not be very convenient, the shock absorption is unstable, the feeling of driving to 80 yards is a little floating, the fuel consumption in the urban area is a little unaffordable, the gear lever shift is not too smooth, the start is a bit meaty, but it is relatively safe, the one-button start sometimes has to be pressed 2 times before starting, the central control intelligent voice response is slow, and the source accompanies and the tire noise is too loud. The color of the seat, originally focused on the light gray seat of Binrui, but there is no such color when it comes to the crack crack car, only black, which is a fly in the ointment.

The tire noise is too loud, I hope that the 19 models can cancel the use of exquisite tires, because it is a car bought last year, so it is an off-white interior, not resistant to dirt, but this year's factory car has been replaced with a black interior, a little regret did not buy a month or two late. There is still a gap between the sound insulation effect and the Emgrand GL, especially at high speed, and the tire noise is indeed obvious. Dear, I wish you a happy life!