What is the reason for the water generated by the glass in the house with plastic steel windows in t

Cause. In winter, the indoor temperature and the outdoor temperature are very different, the house is humid, the moisture in the air is large, there are water droplets on the inside of the window, which is caused by the condensation of the indoor moisture and the cold air outside, and the water droplets indicate that the indoor temperature is not low, if the indoor heating is insufficient, the indoor temperature is low, and the condensation to the window is not the water droplets, but the ice.

Recommendations to address this phenomenon:

1. Don't close the windows too tightly, leaving some gaps for ventilation;

Second, it is difficult to control the difference between indoor temperature and outdoor temperature, and third, try to minimize the moisture in the indoor air.

It is the temperature difference that causes the water vapor in the air to be supersaturated and condense into water. In hot air, the saturation concentration of water vapor is larger, and in cold air it is smaller, which is why we feel drier in winter (especially in the north).

Hotter air is close to a cooler object, the air temperature drops, and the water vapor is supersaturated and condenses, and since this occurs near the surface of the object with a low temperature, the water condenses on the surface of the object.

In the case of an air-conditioned room, the temperature in the room is lower than the outside temperature in summer, and the glass is also lower than the outside temperature, so water droplets are condensed on the outer wall. In winter, the outside temperature is lower than the inside of the house, and because the glass is exposed to the cold outside air, the temperature is also lower than the indoor temperature, so the inner wall condenses water droplets.

Windows can be wiped with a mixture of toothpaste, white vinegar and liquor to prevent condensation on the glass.

Prepare tools: toothpaste, white vinegar, white wine, white socks (or clean rags), steel wool, bowls, watering cans.

1. Squeeze out an appropriate amount of toothpaste in a clean empty bowl.

2. Pour some white vinegar into the glass bowl with the toothpaste.

3. You also need to pour liquor into the glass bowl.

4. Stir the above three evenly and pour them into the watering can.

5. Prepare a sock (you can also use a clean rag) and a steel wool ball.

6. Wrap the steel wool ball in the socks to prevent the steel wool from scratching the glass.

7. Use a watering can to spray the mixed cleaning solution on the window.

8. Use a white sock wrapped in a steel wool ball to wipe the mixed cleaning solution evenly on the window.

9. There will be no dew on the windows after wiping.

<> there is water on the glass in winter, not because the windows are not tightly sealed. There is water on the glass because the window is well sealed, and the indoor temperature is high and the outdoor temperature is low, resulting in the water vapor in the room will turn into water droplets when it encounters cold glass. When there is water on the window, you can open the window, on the one hand, it can ventilate and breathe, air dry the water droplets on the glass, and on the other hand, it can make the temperature difference between indoor and outdoor gradually smaller and dissipate the fog.

Or mix dish soap and water in a certain ratio, and then dip it in a towel to wipe the glass, or you can install another layer of windows outside the window to increase the temperature of the inner window and reduce the phenomenon of water droplets on the window.

Hello, Xiaohai, a home expert, is happy to answer for you. Pro, if there is a phenomenon of flowing water in the glass, it means that the hollow seal is not tight, and the sealing has been lost, and the phenomenon of flowing water will appear when the air is circulated. This phenomenon is not produced in the case of sealed insulating glass.

Problem 1: The quality of the sealant is not good, the sealing is not strict or the glue is mixed unevenly, resulting in air leakage. 2. Because it is located in a high-pressure zone, which is different from the area where the glass manufacturer is located, the glass is deformed and easy to cause air leakage. 3. After a long time, there is a phenomenon of glass aging.

If my answer is helpful to you, please give a thumbs up (in the lower left corner), I look forward to your like, your efforts are very important to me, and your support is also the motivation for my progress. If you feel that my answer is still satisfactory, you can click on my avatar for one-on-one consultation. Finally, I wish you good health and a good mood!

1. It is not that the sealing is not tight, but because when the temperature outside the house is lower than the temperature in the house, some small water droplets will be produced on the surface of the glass in the house, which is the so-called Haqi water, which usually occurs in spring and winter.

2. There are special products for defogging and anti-fogging on the market, such as defogging agents or fog towels. Spray or apply this defogging agent to the glass, and wipe it clean, while removing the glass stains, it can also produce a thin transparent protective film on the glass, which can avoid the fog layer produced by water vapor condensation on the glass surface, and can prevent fogging for about 10-15 days at a time.

3. If the fog is very small, you may wish to open a small gap in the windows on both sides, so that the air in the house will be convection, and the temperature in the house will gradually approach the temperature outside the house, and the fog will dissipate. The advantage is that it can achieve the effect of turning on the air conditioner, but this method can be used in every situation.

Installing another layer will do the trick, and if the windows are open to the inside, installing another layer of glass can also avoid this.

Clause. 2. Disassemble the glass inside the broken bridge aluminum alloy doors and windows, and then strictly seal it again. In fact, it was said earlier that this is probably because the sealant is not well laid, so when the rainwater enters, it will stay in it for a long time, and from a lot of data, the water ingress of the broken bridge aluminum door and window glass is because the sealing is not good! If it can be sealed again, this situation can be effectively avoided.

Seal it with Peng Swelling cement, this is the way to treat the symptoms I don't really understand what you mean. If so, is it sealed and not properly handled? If the glass is not sealed, lay the glass glue! Walls and windows are not sealed with foaming agents.

Place an old towel on the edge of the window so that the water from the glass will be absorbed by the towel, and wring the towel out in the morning. Or as shown above, a strip of cloth is attached to the glass to draw the water into the cup. It can also be used in combination with glass spraying water.

Because there is no thermal insulation on the bay window and the top of the wall window, when the temperature difference between indoor and outdoor is large, the water vapor in the indoor air will condense into the bay window frame and the top of the wall window after being cold, resulting in water flowing on the window sill and dampness on the wall. The frequent presence of water in the window not only causes the window sill to be damp, but also causes the wall to become moldy and black for a long time, or makes the decorative materials moldy and warped.