How to make a wall with fabric? What are the precautions for fabric wall decoration?

Cloth background wall decoration should pay attention to the wall surface to be prepared to paste the wall cloth should be flat and dry, free of dirt and dust, and the color of the wall should be uniform. The wall surface that has been brushed with paint will inevitably appear after several years of use, and the uneven place of paint peeling, cracks or dirt will inevitably appear, and the excessively thick coating material layer will affect the absorption of the wall surface of the wall, so that the wall surface can not be well pasted on the surface of the wall. Therefore, before laying the wall covering, it is necessary to remove the original wall skin and carry out the necessary wall treatment.

Applying a layer of glue to the wall can prevent the wall from absorbing adhesive and making the wallcloth sticky firmly, and it can also make the wall slippery, so that the wallcloth can be slid to the correct position. Use an adhesive brush to evenly coat the entire wall If the slurry sticks to the painted wooden components, it should be wiped immediately with a damp cloth or sponge, otherwise it will be difficult to remove once it has set. After brushing the glue, you can install the wall covering.

Extra-wide walls are installed horizontally. Starting from the shady corners, fix the exact position of the wall covering, fix the pattern with infrared rays, perpendicular to the ground. After the cloth edge is fixed on the wall, it can be laid gradually, paying attention to flatness and fastness.

The wall cloth is about 2 meters long vertically, but do not press quickly, the vertical part must be fixed, first evenly laid along the vertical direction, and then gradually laid and scraped in the direction of pasting, while paying attention to the continuous scraping in the same direction, evenly picking out the air, to ensure that there is no wrinkle and slowly paved (try to avoid pasting the wrong position, open the wall cloth and repeatedly pave, which will cause the wall cloth to wrinkle).

This link is very important, be sure to scrape the cotton twice in order, until there are no bubbles until the construction is completed, wipe off the excess glue with a wet towel, and carefully check whether there are bubbles. If there is, use a needle to exhaust, or use a needle to inject glue to scrape flat, pull out the door, window, socket, and flatten the corner wall cloth with the corner as soon as possible. The junction between the wall, the ceiling and the floor line should be scraped flat, and the excess corners should be neatly cut off by the artist

Please close the doors and windows during and within 2 days after construction, do not ventilate, and let the wall cloth dry naturally, otherwise it will be easy to crack. Wash regularly with a vacuum cleaner or damp towel. If there is oil or dirt, it can be washed with detergent and then wiped dry.

The decoration of the fabric background wall needs to pay attention to: 1. The wall surface to be pasted with wall cloth should be flat and dry, free of dirt and dust, and the color of the wall should be uniform and consistent. The wall surface that has been brushed with paint will inevitably appear after several years of use, and the paint layer that is too thick will affect the wall surface to absorb the wall cloth glue, so that the wall cloth can not be well pasted on the wall, so the original wall skin needs to be shoveled off before paving the wall covering, and the necessary wall treatment is carried out.

Second, the glue on the wall is first applied to the wall, which can prevent the wall from absorbing the adhesive and making the wallcloth not sticky firmly, and can also make the wall slippery, so that the wallcloth can be slid to the correct position. Using an adhesive brush, apply the slurry evenly over the entire wall. If the slurry gets on the painted wood components, wipe them off immediately with a damp cloth or sponge, otherwise it will be difficult to remove them once it solidifies.

The extra-wide wall is horizontally mounted. Starting from the shady corner, after fixing the exact position of the wall covering, use infrared rays to match the pattern and perpendicular to the ground. After the cloth edge is fixed on the wall, it can be gradually paved, while paying attention to the flatness and fastness.

Step 1: Use the infrared flower meter to fix the wallcloth perpendicular to the ground and fix it in an accurate position. If it is not allowed to be fixed, it will cause the cloth to wrinkle and uneven.

You can buy some suitable fabrics and find professional personnel to make them; Pay attention to the funds, choose the right materials, choose good-looking patterns, choose the best fabrics, and do a good job of moisture-proof treatment.

The requirements for wallpaper wallcovering can be ordinary putty walls. The requirements for putty walls are: first; Walls are required to have a second hardness; The smoothness of the walls is required.

First, let's talk about why walls are required to have hardness. If many walls are made relatively soft, the construction effect is not very good, and the wall skin is easy to fall off, therefore, the hardness of the wall skin wall should be well completed.

I've seen a beautifully renovated homeowner before. He asked if we could put wallpaper or wallcovering directly on the wall? Actually, it's okay to stick it, but it's best not to stick it directly to it just to be on the safe side.

Stickup. Since many developers have relatively soft walls, these are basically not putty powders, but fossil powders used for industrial use. During the renovation and construction, they came across many such neighborhoods, and the walls were very loose and slippery by hand.

It will drop the slag, some of which will be peeled off after being glued directly to the wallpaper with a certain pull, and the cement layer will be pulled down directly. So, if I have to shovel off this wall surface, others say I can apply latex paint directly here, but it may not feel it for the time being. After one to two years, you may notice cracks in the wall.

Slag,Therefore, for the general fine decoration room, whether you are pasting wallpaper, wall covering or latex paint, you must check the walls.

In addition, the requirements must be done well, and the yin and yang angles must be leveled, which requires a very high level. For example, since the wall covering is monolithic, the upper part is narrower and the lower part is slightly protruding, so it is not flat when folded. The other is polished walls.

Try not to have particles on the walls and do a very smooth polish, because when there are sand particles, the wall covering will be wrapped, and if there are sand particles inside, even if it is small, you can apply wallpaper to the wall After the wrap is wrapped, there will be obvious protrusions on the surface, but after cutting it all out, it may not be found that the gravel is very small, so a smoother wall is required.

The third is the wallpaper and wall covering during the construction process. There is a difference between them. The wall covering is pasted in one piece, and there are no joints

If it encounters a window, it will be dug out, so there may be some loss. The wallpaper can be spliced and the loss is slightly smaller. The height of the wall is meters.

Depending on our area, it is meters. In fact, it is not only two to three meters that come out of the factory. With this height lost, the room must have some ceiling, perhaps two meters, four or five meters.

However, the calculated area is also calculated on the basis of two meters eight, which is common throughout the country. Therefore, during the construction process, it is necessary to pay attention to the loss of wall materials compared to wallpaper.

If you want to decorate with wall cloth, the first thing to pay attention to is that the wall must not be wet, the wall surface should also be smooth, the choice of wall cloth is also ***, the material needs to be waterproof, try to choose a big brand wall cloth with beer.

I think we have to pay attention to choosing a good wallcovering, because if the quality of the wallcovering, then the gain outweighs the loss, buy a better one.

First, the treatment of the wall and the wall is the first priority.

For wall covering, the wall belongs to the concealed project, and the wall treatment should do the following:

1. Do a good job of waterproofing.

Water seepage in the wall is a big no-no. To prevent water seepage on the wall, it is necessary to do a good job of waterproofing engineering, which is particularly emphasized here that the wall next door is the wall of the bathroom, and on the wall of the bathroom, it must be waterproof, so as not to make the wall cloth affected by the dampness of the bathroom.

2. Ensure smoothness.

If the wall is pitted, it not only increases the difficulty of construction, but also makes it difficult to ensure the quality of construction and affects the appearance. The method of judging whether the wall is flat is extremely simple, it can generally be observed with the naked eye, or with the help of an incandescent lamp illuminated in the corner of the wall, or you can use a long wooden stick against the wall to see if there is a gap.

Second, the wall covering should meet six conditions.

1. Install the floor. 2. Install the baseboard. 3. The door sleeve and door are installed. 4. Wood paint is completed. 5. Lay the air conditioning hole. 6. The holes of the curtain hanging rods are laid.

3. Precautions after the completion of construction.

After the construction of the wall covering is completed, you also need to pay attention to some details, such as ventilation, cleaning and maintenance. Pay attention to these details, and a room decorated with wall cloth can always maintain a beautiful and clean effect.

In addition to the big white wall, the decoration of our home is not just a variety of paints, but we all know that the paint itself can not fully achieve environmental protection, no matter what the cover, there are some formaldehyde, decoration is a very happy thing, so the material is the key point, now if you still paint the wall with paint, then you are really stupid.

There is a material that people use less for the surface of the wall, and you feel that it is not like paint or fixed on large white walls. In fact, these are some misconceptions about people who don't use it. Fabric wall wall decoration cloth, this material is the wall cover stuffy cover.

Listening to the name, you know, the fabric wall wall upholstery fabric is undoubtedly a cloth, in fact, it is almost the same, and there are many colors to choose from.

Wall paints have been around for a long time, but why aren't they so popular? In fact, everyone is still waiting, due to technical problems, this wall covering is not very mature, there are some flaws, but the current process does not have to worry.

Fabric wall upholstery has advantages that latex paint and other decorative materials do not have. Because it's a fabric, you don't have to worry about its eco-friendliness. Due to the process, it also has the characteristics of sound insulation, waterproof, flame retardant, abrasion resistance, antistatic and mildew resistance.

The advantage, you can't see the hole that exists in the wall, you can say that it is transparent. It has a variety of patterns, we can choose the pattern of the wall covering according to the style of the house, these are not problems.

1. Keep the wall clean and dry.

2. Apply tape to the crack and press hard.

3. Confirm that the space has been covered with tape, then cut the tape with a knife, and finally brush with mortar.

4. Let it dry naturally, then gently rub and grind.

5. Fill enough paint to make the surface smooth.

6. Cut the extra tape.

1. It is necessary to brush the interface very evenly.

2. Cracks: Under normal circumstances, the chain is bent and white cowhide latex is used to adhere to the cracks.

3. Leveling: The irregular surface of the wall should be smooth, and the general plastering is more commonly used, and the difference between the concave and convex surfaces is not more than centimeters.

4. Subsidized cloth: required.

You can get it for free

With the improvement of the quality of life, people's requirements for decoration are getting higher and higher, from paint to wall covering, from cement wall to overall decoration. Many people don't know how to paste the wallcovering, so let's take a look at the 6 steps of how to paste the wallcovering.

Clean the foundation of the wall with a clean sheet, scrape the putty, and then polish the wall after it is dry to make it smooth and clean, and then apply a layer of base film to avoid the wall from being damp, and the wall cloth is not easy to be damaged if it is often replaced in the future. If the wall has been painted with latex paint before, the floor paint must be applied before the wall covering is applied. This is due to the fact that latex paint absorbs water easily, and the wallcovering will be difficult to stick to.

In order to avoid the wallcovering from getting dirty, before pasting the wallcovering, it is necessary to clean up the scene, the sharper the wallcloth knife for cutting the wallcovering, the more convenient it is to cut it clean, and avoid dragging mud and water.

The next step is to adjust the glue, open the packaging of the material, pour the special glue and water in proportion, and stir it evenly with the machine until the slurry is formed, which are all preparations for how to paste the wall covering.

As for how to paste the wall covering, first of all, use a brush to apply glue on the back of the wall covering, and pay attention to the surrounding edges should also be coated to ensure the quality of the construction.

How to paste the wall cloth, usually by the door, or from the dark corner, from top to bottom, with a scraper from top to bottom, from the inside to the outside, gently scrape the flat wall cloth, so that the wall cloth is close to the wall as far as possible without gaps.

Cut off the excess wall cloth at the top and bottom ends to avoid sharp edges. The remaining pieces of wall cloth can actually be saved and not thrown away, and may be used for future repairs. After attaching the wallcovering, wait patiently for 24 hours for it to fit well with the wall.

If you want to hang something or ornament on the wall, you should draw a "V" on the wall cloth where the nail is nailed, so that it can be used when repairing it later, and it will not be troublesome.

If you want to paste the wallcovering, you can do it according to the specific six steps of how to paste the wallcovering, and the wallcovering also has the advantage that it will not be too troublesome to change each time, which is very suitable for different needs in different periods.

You can get it for free

Wall cloth can beautify the room and protect the wall, so many people will choose wall cloth when decorating, but how to paste the wall cloth is also a science, today I will introduce you to a few tips on how to paste the wall covering.

**How to paste the wall cloth before, to ensure that the wall is neat and smooth, if the wall is dirty, you can use a soft cloth to wipe gently, the wall is raised, you can use a small shovel to shovel off the raised part, and then brush the paint, there are cracks, to fill in well, to avoid affecting the effect and beauty.

Before pasting the wall covering, use the perpendicular line tool to measure and prepare, choose the position of the wall cloth, pay attention to the position of the 4 corners of the wall cloth, and avoid the oblique pasting.

After the preliminary work, the formal wallcovering, how to paste the wallcloth is skillful. Do not apply the wallcloth glue when the hairy hands and feet, to be calm, fold the wallcloth, and then wipe the glue side, while folding the wallcloth, so as not to get the glue, you can use the S-shaped folding method, simple and scientific, the order can not be mistaken, it is above, left, bottom, and finally right, so that the effect will be smooth and beautiful.

When it comes to how to paste the wall cloth, but also pay attention to the symmetry of the pattern, if it is not symmetrical, no order, the effect will be very unsightly, while pasting to pay attention to whether the pattern of the pattern is symmetrical, timely according to the pattern to adjust the position of the paste, if it is a problem with the printing and wall cloth itself, you can contact the business to exchange, do not stick it hard.

After the wallcovering is pasted, the whole wallcovering can be brushed with a flat brush, up and down, left and right in order, and the position around the seam and the wallcloth can be crimped with rollers.

The wall cloth is sometimes attached to the socket or the like, at this time, it is necessary to use a utility knife to cut out the excess wall cloth of the ruler Tong, if there are bubbles after pasting, use a fine needle to puncture the bubbles and smooth them carefully.

The above is how to be sleepy and funny to paste the steps and some tips, and so dry the wallcovering, it will be done, although the wallcovering is simple, it is also a science, I hope to help you.

You can get it for free