On the tile wall of the living room, there is no hole, how to hang the LCD TV on the wall?

I want to hang it on the tiled wall in the living roomLCD TVAnd don't want to make holes in the tiles, although it is a bit difficult but not impossible? Here, Brother Yu will give you a few tricks!

1.The first move. I don't know if this friend has heard of itNail-free glueThis product?

This is a very good glue-based product that can be stickywood, stone, metal, plastic, tile ordrywallBesides, if the cow breaks a little, it is possibleSticky for everything!

Therefore, if you want to hang the TV on the tile without opening the hole, you can consider using nail-free glue, and there should be no problem with gluing the bracket of the TV to the tile with nail-free glue, but I dare not guarantee the bearing capacity, nor dare I guarantee the service life? For the safety of your TV, please think carefully and use it carefully!

2.The second trick. If you don't worry about its bearing capacity, you can consider using itMarble gumMarble gum isDry-hung stoneWith the adhesive, do you think how heavy the stone can be hung steadily, let alone an LCD TV?

YesMarble gumFix the bracket on the wall, wait for the marble glue to fully solidify, and test the bearing capacity to see if it can hang the TV?

Note: Marble glue is suitable for the pasting of stone and pendants, because the surface of the tile is relatively smooth, which may affect the bonding effect of marble glue, do not dare to ensure the quality of long-term use, in order to ensure the safety of expensive LCD TVs, please use with caution!

Speaking of which, it seems that these two glues are a bit mysterious when used to fix the TV bracket? It's not that the stickiness of these two glues is not strong enough, but it is attached to the smooth surface of the tile, even I feel that they will lose their due stickiness, if the smooth surface of the tile is polished and then glued on, there will be absolutely no problem, but this is no different from opening holes in the tile?

Therefore, in order for such a good LCD TV to be safely and securely hung on the wall, make a few holes in the tileExpansion screwsWouldn't it be safer to secure the TV stand?

Is it that hard to make a few holes in the tile wall to secure the TV stand? Use a glass drill bit to drill through the tiles first, and then use themPercussion drillsDig a little deeper into the wall, which will not cause much damage to the tiles, and can also hang the TV firmly, what is there to worry about? I don't want to hang the TV in the future, the tiles can still be repaired back to the original state, what are you afraid of?

Previously, it was said that it is possible to use "nail-free glue" or "marble glue" to hang a TV on a tile wall without opening holes, but it is not practical and unsafe. So after going around a lot, it is finally recommended that the bracket must be opened, and the fixing bracket is the most reliable! What do you think?

If you want to make the LCD TV without punching holes, it is still not possible,Unless the TV wall is made with a groove that is larger than the TV,So that you can put the TV on it,There is no need to hang it at all。

Use stickers, or communicate with the manufacturer when buying a TV, and ask them to provide stickers, and now many TVs can be hung without punching stickers!

With nail-free glue. Some of today's nailless adhesives are very easy to use, and they can be fixed with brackets without punching holes.

You can use a floor-standing LCD TV stand to hang the TV on the wall. The following introduces the specific installation method for reference, first prepare the materials: floor-standing LCD TV bracket, LCD TV, level, screwdriver.

5. Fix the panel to the conversion head with screws, and pay attention to the screws not to be tightened first.

7. After the panel is adjusted to the level, tighten the screws.

10. Tighten the anti-slip screws.

Holes have to be punched, four holes made.

Tips for installing LCD TV racks on different types of walls:

1. Ordinary brick wall.

No special tools or techniques are required for installation. Just drill a few holes in the wall with a percussion drill and hang the TV on the wall.

2. a board wall. Slab walls are divided into solid wood walls and gypsum board walls. As long as the thickness of the solid wood is 50px, the ring is directly filled with self-tapping screws.

If it is a drywall wall, you need to choose the right anchor point, use an art design knife to hang the point first drill a hole in the center (the size of your finger), and then hang the hole in the shelf for an article of 50px thick long wooden plank, so that the self-tapping screws through the drywall use the wooden slats, the pressure size increases.

3. Marble walls.

The marble walls are divided into monolithic marble and decorative marble. For monolithic marble slabs, choose glass drills. When using a glass drill bit, water the glass drill bit when drilling to avoid burning the glass drill bit.

If the glass drill is too difficult to penetrate the wall, you can use a percussion drill to drill halfway through, but the percussion drill must be placed on the gear of the electric drill, otherwise it will crack the marble.

After punching, you can install the expansion screw and tighten it. For patterned marble, it is necessary to be more careful when drilling, because the patterned marble itself has a texture on it, and a larger vibration force will cause the crack to increase.

4. Glass curtain wall.

Behind the glass walls are brick walls and slab walls. If there is a brick wall behind the glass wall, the selected glass drill bit must be larger than the impact drill bit on the brick wall. After the glass hole is drilled, a percussion drill is used to drill through the brick wall inside.

In order to prevent the glass from shattering when using screws, it is best to use a large screw expansion tube as a filler ring.

The thickness of the filler ring can be selected to be a little thicker than the glass, and then the screws are tightened. If there is a wall in the glass plate, drill the hole out of the glass with a glass drill, the glass hole should be a little bigger, after drilling the hole, you can put the ring, and then use the self-tapping screws, the selected self-tapping screws must exceed the thickness of the glass and the thickness of the wood.

5. Fix the panel to the conversion head with screws, and pay attention to the screws not to be tightened first.

7. After the panel is adjusted to the level, tighten the screws.

10. Tighten the anti-slip screws.

This is impossible, even if the TV is very thin, the weight is still there, and the TV cannot be hung directly on the wall without punching, if you really don't want to punch holes in the wall, you can only use the TV cabinet.

It would be better to hit with a charge drill, and then add an expansion bolt, so that the permanent problem will be solved at once.

If you don't punch holes, you can't install a TV hanger, and you can't hang a TV. Glue the TV stand, the firmness makes people doubtful, whether it can withstand the weight of the TV is hard to say.

If you want to hang the TV on the wall without punching holes, you can buy a vertical hanger and stick it directly to the wall.

LCD TV (liquid crystal display), also known as liquid crystal display, LCD, uses a substance between solid and liquid state, organic compounds with regular molecular arrangement, heated to present a transparent liquid state, after cooling to appear crystalline particles of a turbid solid state of substance. The world's first liquid crystal display device was manufactured by Sharp in Japan in the early 70s of the 20th century, and was called TN-LCD (twisted nematic) liquid crystal display.

The molecular structure of the liquid crystal used for liquid crystal displays is similar to that of a thin matchstick, and it is called Nematic liquid crystal, and liquid crystal displays made of this type of liquid crystal are also called liquid crystal displays (LCDs). The LCD TV is in the liquid crystal between two glasses, add voltage, through the molecular arrangement changes and zigzag changes to reproduce the picture, the screen through the collision of electrons, create a picture, and form a picture through the perspective reflection of external light.

Buy a vertical hanger. You don't need to punch holes, just put it against the wall, but the vertical hanger is a bit expensive

Holes need to be punched. It takes 4 to play.

The ** distance of a wall-mounted TV is at least 3-5 times the diagonal distance of the TV display. The installation height should be suitable for the owner to sit on a stool or sofa with eyes at eye level or slightly below the center of the TV. The center point of an ordinary TV is about a meter above the ground.

According to the requirements of the installation location, ensure that the installation surface is free of buried water, electricity, gas or other lines.

Assemble according to the rack instructions. Depending on the TV mounting location, mark the location of the rack mounting holes, and then drill the holes in the marked locations. Then fix the hanger with screws, etc.

It should be used to punch the way to place the expansion screw,After all, it is stable,Generally, the TV hanger is used in this way,After all, the size of the TV is large,The weight is also heavy。 I think that the hook such as a common quartz clock is not firm.

Generally, the pylons should be drilled with at least four holes.

Hello: When you hang an LCD TV on the wall, you must make a hole in the wall, not on the TV. Punching four holes in the wall is to press the hanger of the TV, and when the hanger is installed, just hang the LCD TV.

If you want to press the TV stand without making a hole, put it on the TV table. The other is to use a TV stand, which is directly poked on the ground, with pulleys, which is very convenient to move.

There is no need to punch holes in the TV, the easiest thing I've ever seen is a bracket with two holes. The stand and TV are not together and need to be purchased at the time of installation. If you don't want to make a hole, you can use the base under the TV, but then you have to put it on the table.

There is another way, after all, nonsense, which is to make a hole in the roof and then hang the wire, but this technology is rarely adopted, so there are not many people who will install it.

If your TV doesn't have a hole to hang on the wall, there are a few ways to hang it on the wall:

1.Use special TV hangers: Some TV hangers are designed for TVs that don't require holes.

These hangers typically use glue, magnetism, or adjustable clips to hold the TV set. Make sure you choose the right hanger that will support the weight of your TV and securely attach it to the wall.

2.Use self-adhesive hooks or cloud nails: Some self-adhesive hooks or cloud nails can provide a temporary point of support on the wall.

You can attach hooks or spikes to the wall and use them to hold the bottom of the source view. Make sure to use the appropriate quantity and quality of hook dust removal or cloud nails to ensure the stability of the TV.

3.Use a floor stand: If you can't hang your TV on a wall, consider using a floor stand.

This bracket is usually a free-standing structure on which the TV can be placed. Floor brackets are available in a variety of styles and sizes, and you can choose the right one for your needs.

Please note that when installing your TV, always follow the manufacturer's installation guidelines and ensure that the installation process is safe and secure. If you have any concerns about installing a TV, it is advisable to seek professional advice or seek professional installation services. <>