-
The dust mist gun uses the principle of high pressure to spray water in the form of a fine water mist and deliver it to the place where the dust rises and floats. The fine water mist adheres to the dust particles in the air, and the moist particles continue to adhere to it, so that the particles with a certain weight fall to the ground under the action of gravity, so as to achieve the purpose of dust reduction.
The types of dust and fog cannons include fixed dust and fog cannons, mobile dust and fog cannons, tower dust and fog cannons, multi-functional dust suppression vehicles, etc. There are many dust fog guns used in general construction sites, such as mobile dust fog guns, multi-functional dust suppression vehicles, etc.
The gun of the multi-functional dust suppression vehicle can spray fine water mist, and its bottom nozzle can also spray fine water mist near the ground. However, the multi-functional dust suppression vehicle is large in size and small in flexibility, and is suitable for large-scale construction sites.
Bian Xiao of Huali Electromechanical learned that at the project site of Country Garden Tianqin Garden in Zhengzhou, Henan, there are several dust reduction fog guns to prepare for spraying water mist and controlling dust.
Then the leadership put forward three requirements for the construction project:
The first is to speed up the progress of construction. It is necessary to clarify the time node and make every effort to do a good job in earthwork removal at the construction site.
The second is to strengthen service guarantees. The office should work closely with the project unit to track the whole process and promote cooperation.
Third, do a good job in dust control and management on the construction site. Intensify continuous management, reasonably set up fog cannon machines, external spray systems and other equipment, and fight the battle of atmospheric dust reduction.
For small construction sites, mobile dust collector fog guns can show great power.
-
Construction site spray dust reduction series products is a new generation of independent research and development of multi-functional spray dust reduction equipment, the use of two types of special chassis modification, with safe and reliable operation, water mist range, small water consumption and other characteristics, the model spray system is suitable for urban street haze control, open-air coal storage, coke, sand, stone and other industrial and mining enterprises yard spray dust suppression, construction sites, housing demolition and reconstruction sites, site leveling sites and other spray dust reduction, public places, green garden spraying sterilization and disinfection; The water cannon for front washing, rear sprinkling and rear operation is suitable for urban road environmental protection dust reduction, road cleaning, and billboard cleaning and environmental protection operations. The left and right greening watering devices can be used for the watering operation of the highway green belt.
Dust control from construction and demolition, unloading and transportation of construction waste or waste residue, local dust control from mechanical operations, and road dust pollution control in heavy-duty vehicle transportation; Dust reduction, moisturizing, cooling and disinfection in hot places; Airports, schools, highways, stations, docks, public places, and sports venues are sprayed to reduce dust and cool down.
Stockpile: open-pit mining, open-pit stockpiling yard, coal gathering station, power plant coal yard, coking plant, truck unloading port, coastal port shipment, transshipment coal, open-pit or closed unloading area, ore, bulk powder handling and other dust pollution control;
forest protection, urban landscaping, street trees and other tall trees spraying to control pests and diseases;
-
There is no difference in the name of the same equipment, for example, Mandarin eats, Cantonese says food, the same meaning, I am doing waste gas treatment equipment.
-
Large, there will be water and puddles on the ground, suitable for heavy dust and not afraid of water, which has basically been eliminated. Spray dust reduction uses a high-pressure plunger pump to pressurize, and then cooperate with the fogging and dust reduction nozzle to produce micro-mist particles, which float in the air, the size is close to dust, and it is easy to adsorb dust on the ground without producing stagnant water, which is suitable for most factories. Now environmental protection promotion of several sprays to reduce dust, after the installation of spray, but also to transform, down the cost is higher.
-
Hello, spray dust removal spray out of water particles, spray dust removal fog particles are different in nature, the traditional method of dust removal we all know that the use of tap water to solve the dust problem, is the use of water droplets in the process of evaporation and dust particles in the air combined, the specific gravity increases, and then land. As we all know, in the process of coal mining, drainage is a very important problem, and the accumulation of water in the channel can easily cause accidents such as collapse. However, the artificial fogging system has changed this situation, because the water particles produced are very small, extremely easy to evaporate, combine with the dust particles in the air, and then settle, but do not form stagnant water, artificial fog is an ultra-fine fog particles suspended in the air, and the fog contains a large number of negative ions.
It can increase the oxygen content of the air and greatly improve the environment in which people live and relax. Chongqing Yisen Wujing Environmental Protection Technology Co., Ltd. is a professional company specializing in the development and development, engineering design, construction and after-sales service of high-pressure micro-fog, artificial fog, fog and atomization humidification equipment systems. Provide customers with a full range of services in the field of spray, artificial fog application and comprehensive solutions.
The company adheres to the modern enterprise management mechanism, professional management personnel of various projects, scientific decision-making system, perfect quality control methods, and excellent product quality, and has been well received by customers for many years. Adhere to the policy of "quality first" and "integrity management", pay attention to product quality and installation quality everywhere from the ideology and work, and achieve careful design, careful organization, careful command and careful construction to ensure that the quality of the project is excellent. High-pressure micro-fog and artificial fog use water as raw material to achieve the effect and purpose of landscaping, cooling, humidity control and dust removal, and are widely used in landscape landscaping, stage landscaping and air purification.
Artificial fog and fog forest systems are suitable for hot springs, rockeries, natural artificial landscapes, ecological gardens, botanical gardens, flower gardening, animal husbandry, indoor and outdoor large-scale public entertainment places, industrial plants, open-air restaurants, stalls, etc. The functions are cooling, humidification, sprinkling, disinfection, deodorization, dustproof, environmental protection, etc.
-
It is for dust protection.
Under the action of a certain water pressure, the water mist nozzle splits the water flow into water droplets less than 1mm, and the water droplets can absorb the dust of the construction site.
If cultural relics or ancient tombs are found during the construction, they should be properly protected, and should be reported to the relevant local departments in time before the construction can be continued. If permanent stakes for surveying or long-term observation points set up by geological and ** departments are found, they should be protected.
When laying earthwork construction in the section with above-ground or underground pipelines and cables, the written consent of the relevant management departments should be obtained in advance, and measures should be taken during the construction to prevent damage to the pipelines, prevent landslides, and avoid serious accidents caused by excavation.
When excavating earthworks, it is necessary to prevent subsidence and deformation of adjacent buildings or structures, roads, pipelines, etc. If necessary, it should consult with the design unit or construction unit, take protective measures, and observe the settlement or displacement during construction.
-
There will be a large amount of construction dust and secondary pollution during the use of the construction site, and the environmental department has requirements for the prevention and control of the construction site.
Spray dust reduction is one of the dust reduction methods, it is the use of high-pressure plunger pump to increase the tap water to 50kg-60kg pressure, the pressurized water through the high-pressure resistant conveying pipeline by the high-pressure atomization nozzle atomization to atomize it, the production of micro-mist particles, the diameter of the droplets is about 10-20 m, so that it can quickly absorb heat from the air, complete gasification and diffusion, attach the condensation of suspended dust in the air, so that it falls to the ground, so as to achieve the purpose of spray dust removal and air purification.
-
High-pressure spray tung dust reduction equipment is an environmental protection equipment that uses high-pressure water mist to condense dust particles and settle them to the ground. It has a good effect, which can effectively reduce dust pollution in industry, transportation and other fields, improve air quality, and protect people's health.
However, there are some disadvantages of high-pressure spray dust suppression equipment, such as:
High cost: The initial investment of high-pressure spray dust reduction equipment is large, and it is necessary to purchase high-pressure pumps, nozzles and other equipment, and install and maintain them, which is difficult for some small enterprises or rural areas to bear.
High energy consumption: High-pressure spray dust reduction equipment needs to use high-pressure pumps to raise the water pressure to a certain extent, which will consume a lot of electricity and increase production costs.
Limited scope of application: Since the high-pressure spray dust reduction equipment relies on water mist to condense particles, it is only suitable for some coagulable particles, and the effect is not good for some non-condensable or chemical particles.
High operational requirements: High-pressure spray dust suppression equipment requires professionals to operate and maintain, which is difficult to achieve for some enterprises that lack technical personnel.
To sum up, although high-pressure spray dust reduction equipment can reduce dust pollution in the air to a certain extent, it also has some of the above disadvantages and needs to be comprehensively considered.
-
We are searching for you: construction site dust spray system, **, list Hello! Regarding the **list** of the dust suppression spray system on the construction site, I can provide some basic references** and the corresponding configuration information:
1.High-pressure pump: about 5000 yuan, it is recommended to choose high-quality products of domestic brands.
2.Nozzle: According to the specific needs to choose the corresponding model, roughly in the range of 300 yuan to 1000 yuan, it is recommended to choose a nozzle that can be rotated 360 °, which can achieve better spray effect.
3.Water management bureau, joints and other auxiliary materials: about 300 yuan.
5.Installation and commissioning costs: depending on the scale of the project, roughly between 5,000 yuan and 10,000 yuan.
In general, the first of a basic construction site dust reduction spray system is about 20,000 yuan. Of course, the specific ** should be comprehensively considered according to the actual situation of the project, the materials used and the maintenance and other factors.
-
Spray dust reduction equipment such as fog cannon machine, fog cannon truck and sprayer products, the use of high air pressure to pressurize water, through the pipeline input to the high-pressure nozzle atomization device to form a water mist floating in the air, water mist through the fog system to send the water mist to a long distance, water mist can adsorb fine dust and suspended particles in the air, so as to achieve dust reduction.
Once I went to Xiamen Shihushan Wharf to take a boat, I saw a fixed one, the fog cannon said Otto environmental protection, and the water mist sprayed was very spectacular.
-
The spray dust reduction truck can be used for dust reduction on the construction site or in urban areas, spraying pesticides and disinfectants, and it also has the function of sprinkling cherry water trucks, which can sprinkle water for the road surface and greening. The specific assignments are as follows:
Dust reduction at the construction site or in the urban area, spraying pesticides and disinfectants.
Illustration of the sprinkling of the key surface of the road celery.
The watering map of the green belt is shown in the first bush.
The above are the main functions of the spray dust reduction truck.
-
The principle of dust suppression sprayer:
1) Under normal circumstances, the manpower-driven sprayer relies on hydraulic power, that is, hydraulic pressure, and pumps the liquid out through hydraulic pressure.
2) The pneumatic sprayer relies on the action of air flow to spray, and can carry out low and micro spraying. Compared with the hydraulic sprayer, the uniformity of the droplets is better, and the droplets are smaller, and the drift or targeted spraying can be carried out.
Spray dust reduction technology is a very common technology, the use is also very extensive, Guangdong Fenghua environmental protection equipment has a lot of the use of spray dust reduction technology to work, spray dust reduction is a new type of dust reduction technology, the principle is the use of spray particles due to its very small, the surface tension is basically zero, sprayed into the air can quickly adsorb various sizes of dust particles in the air, the formation of effective dust control.
3) Centrifugal sprayer is a spraying instrument that uses the centrifugal force when the centrifugal nozzle rotates at high speed to disperse or atomize the liquid medicine. The size of the sprayed droplets is relatively uniform, the droplet diameter is adjustable, the centrifugal nozzle speed is high, and the droplets are small. It can spray pesticides with high viscosity.
Can be used for both ultra-low volume sprays and low volume sprays.
The dust removal effect of the spray dust suppression vehicle is very good, it uses advanced "cloud and fog" technology, which can atomize the aqueous solution into micron-level water mist, like the water mist of Hunan Jiujiu Mine Spray Dust Suppression Vehicle is 10-150 microns, which means that the same volume of water can be expanded by tens of thousands of times, plus his fog cannon device has a high range to cover tens of thousands of square meters of dust source area. The water mist sprayed by the spray dust suppression vehicle can adsorb dust particles in the air, and finally descend to the ground under the action of gravity, so as to achieve the effect of dust removal and haze reduction. With such a wide coverage, the dust removal efficiency is naturally good, and the spray dust suppression vehicle can be regarded as a dust removal weapon! >>>More