It is better to make a bed for carpentry or buy a bed, which wood is unlucky to make a bed

Do the math how much it will cost you to renovate your home

Whether it is a bed made of woodworking, or a finished bed bought in the store, each has its own benefits, can not be generalized, as a consumer, in order to buy a suitable for themselves, and cost-effective bed, you can consider the following aspects.

1. Consider from the degree of firmness.

When choosing materials, you can choose thick solid wood boards, and then reinforce, so that the bed is more durable, and the finished bed made by the store is not fixed, and the reinforcement point will be relatively few, there is no problem at the moment, there may be a sound after a long time, so from this aspect alone, the bed made by carpentry is more advantageous.

2. Consider from the perspective of decorative performance.

The bed made by carpentry is relatively single, the overall look will be more rigid, and the decorative performance is average, and there are many types of finished beds in the store, including color, modeling, etc., which cannot be made by carpentry by hand, so for the owners who want the room to look good, it is more appropriate to go to the store to buy finished beds.

3. Consider it from the best aspect.

There are a lot of beds on the veneer that can be bought, according to different brands, different materials, different processes, ** there is a big difference, you can buy expensive ones with good economic conditions, and you can buy cheaper ones with good economic conditions, and the cost of carpentry beds is not cheap, first of all, the board will be bought, plus labor costs, it may be more expensive than the finished bed after completion, so it is recommended to compare more, and then choose cost-effective according to demand.

Enter the area and get the decoration for free**].

In fact, if the economic conditions allow, then it is better to order your own bed. Especially the bed made of solid wood. However, if you have your own carpentry tools and can make them yourself, then it makes more sense to make your own bed.

Suitable for making a bed of wood row pro! Hello, glad to answer for you. The ranking of woods suitable for making beds is as follows: 1. Oak oak is a very popular wood in recent years.

Advantages: The texture of oak wood is fine, there are more intrusive fillers inside the pipe holes, it is not easy to absorb water, it is corrosion-resistant, the hardness is tough, the color is light and the texture is beautiful. So the oak home has very good wear resistance.

Moreover, the oak wood has a delicate texture, good stability, and moisture resistance, and the furniture made is durable and has a very long service life. Disadvantages: There is less domestic oak wood, mainly dependent on imports, slightly higher; And the oak texture is hard, the production process is high, in the case of the production process is not very mature, improper production is prone to deformation and cracking.

2. Fraxinus mandshurica, walnut and yellow pineapple are known as the precious "three hard and broad tree species" in Northeast China. Advantages: ash is harder and wear-resistant than pine, more friendly than mahogany, its processing performance is very high, it can be fixed with nails, screws and glue, etc., and can also be dyed and polished to achieve excellent results.

Disadvantages: The white wood of ash itself is easy to be eaten by powder beetles and common furniture cracks, and is prone to warping. 3. Ash wood is known as in Norse mythology"World Tree"- Ash wood, similar in appearance to European locust wood, is a precious wood in Europe.

Advantages: The moisture content of ash wood is usually between 8% and 12%, and the wood has good processing, lacquering and polishing properties. The strength and hardness are also very high, the bearing capacity is strong, strong and durable, and it is often used as wood for high-end furniture.

Moreover, the appearance of ash wood is simple and natural, full of artistic atmosphere, vividly showing the charm and spirituality of nature, whether it is used to create a Japanese log style, American style, or new Chinese style, it is very suitable. Disadvantages: Ash is a very scarce and precious wood.

The raw material of ash is difficult, because it is extremely demanding on the soil in which it is grown, and generally grows in fertile soils as well as forest-steppe forest podzolite loam. In addition, the drying performance of ash wood material is poor, the wood surface of ash wood is easy to fluff, and the surface is easy to peel and tear, which is easy to affect when making furniture. 4. Among the black walnut from many origins, the color, texture, texture and performance of North American black walnut are the best, and it is known as "the nobility of wood".

Advantages: North American black walnut combines stability and comfort. Because of its long growth cycle, it has the characteristics of high density, high hardness and strong compression resistance, and furniture made of black walnut is not easy to crack and deform, and is more durable and durable.

And it has good toughness and can be processed into beautiful shapes. At the same time, black walnut has good moisture absorption and air permeability, low moisture content, wood is not dry or dry, wear-resistant and rot-resistant, and the dry shrinkage and wet expansion of wood will not have a great impact on furniture. Cons:

Black closed walnut has poor toughness, is easy to be eaten by insects, and is a rare wood, with a small market share.

Buy a wooden bed and choose oak, oak is also a kind of decorative wood that everyone loves.

Oak is characterized by heavy hardness, straight grain, coarse structure, elegant color and beautiful texture, high mechanical strength, and wear resistance, but the wood is not easy to dry, sawing and cutting, and at the same time, if a large area is used, the degree of deformation is large.

Pay attention to one point when using oak, many Southeast Asian rubber wood is used to pass off as oak, and you should pay attention when buying wood and furniture. For rubberwood, the identification method is that rubberwood has an odor, is easy to be eaten by insects and corrosion.

Buying tips:

Measure the size of your room and know how big a solid wood bed you need. In general, the common sizes on the market are m*2m, m*2m, and m*2m beds. If other sizes are needed, they can be customized by the manufacturer.

The biggest advantage of solid wood furniture is that there is no formaldehyde in panel furniture, so whether solid wood furniture is environmentally friendly, the most important thing is to check the paint it uses. Ask the manufacturer for the brand of the paint, and go to the Internet to check whether the paint is environmentally friendly; Or directly check the inspection certificate of the product from the relevant environmental protection department.

Although the solid wood bed is very strong and there will be no quality problems, in order to ensure our legitimate rights and interests, the product must be required to have a warranty card. In this way, in case something goes wrong, the warranty is proven.

Don't choose the pine, it's too soft. Don't choose cypress, it used to be used by people to make coffins, which was unlucky. The rubberwood is easy to break, so it is best not to use it.

Other common wood in the world is basically enough. Ordinary people's ash at home, the good point is elm, oak, oak, teak, there is a kind of wood called Rignan, to put it bluntly, it is Australian eucalyptus, I personally think it is the best wood for furniture, because it is almost not deformed!!

This should be chosen according to personal preferences and financial ability, and go to the furniture market to see more. . .

Medium ash bar, too bad is not practical, too good is not cost-effective.

Pine and sycamore are unlucky to make beds.

Pine wood. Pine wood cannot be used as a bed, because the wood is soft, the hardness is poor, it seeps pine oil, it is easy to crack, and there are more turpentine nodes than the squire mill. The wood of pine is soft, and it is easy to get pits once it is bumped.

Its hardness is poor, and the load-bearing effect is not good. Pine oil seepage, after a long time, pine oil will be more troublesome. The smell of pine oil will be relatively large, and the moisture content of pine wood is easy to crack if it is not treated well.

Chinese parasol tree. Sycamore tree is unlucky to make a bed, Sycamore Tree Chinese Sycamore is a plant of the Sycamore family, alias Qingtong, Tung Hemp, also belongs to the deciduous large tree, up to 15 meters; The trunk is straight, the bark is green and smooth. It is native to China and is cultivated in both northern and southern provinces.

Sycamore grows fast, the wood is suitable for making musical instruments, the bark is used to make paper and rope, and the seeds are edible or pressed for oil. By the old bucket in its trunk smooth, large and graceful leaves, is a famous ornamental tree species.

Tips for making a bed

Purchase the materials and accessories you need.

You'll need a circular saw, a couple of L-brackets, 3-inch (long screws, some MDF or plywood, and a few boards of varying sizes).

Set up a basic bed frame.

Using standard butt screws, two 75-inch 2x12-style planks and two 57-inch 2x12-style planks are spliced together into a rectangular box with an area of 60x75".

Install the bottom support frame.

Insert the remaining two 57-inch 2x12 planks into the bed frame, divide the original rectangle into three equal parts, and tighten it with screws. Once you've done that, you can put aside the bed frame that is already taking shape.

Wood suitable for making bedsNowadays, most of the wood used to make beds is solid wood, but there are many types of solid wood, such as mahogany, mountain wool, camphor wood, pine, birch, mahogany, ash and so on. So, what are the best woods for beds? The following is an introduction to several types of solid wood for your reference.

1. Elm elm is the most common wood in furniture, and its advantages are: the wood grain is very good-looking, and the hardness and toughness are relatively good. But the dryness is not very good, and it is easy to crack.

2. The advantage of mahogany is that the hardness is just right, it will be very convenient to process, and it has good anti-corrosion characteristics. The disadvantage is that the density of this type of wood is average. 3. Teak is one of the most valuable hardwoods in the world and has the title of "King of Wood".

Its advantage is that it is not only waterproof, but also does not become brittle, deformed, twisted, bent, expanded and cracked, etc., it has to be said that this kind of wood has a special fragrance, which can repel snakes, insects, rats, ants, and maggots. 4. Pine can be divided into red pine and white pine. Its advantages are that the material is soft, easy to process, good drying, and has strong anti-corrosion properties.

5. Mahogany does not refer to a kind of wood, but a general term for a kind of precious wood. Its advantages are that the color is serious, the grain is precise and beautiful, and the wood is strong and heavy, and it is strong and durable. However, it is worth saying that the mahogany furniture made on the market is mostly sour branch wood and rosewood, if it is replaced by mahogany furniture made of huanghuali and rosewood, then it is very expensive, and at the same time has the effect of maintaining and increasing its value.

From the point of view of the degree of firmness, from the point of view of decorative performance, from the aspect of the best, the bed made by carpenter is good.

1. The bed made by carpentry can be customized according to actual needs, when choosing materials, you can choose thick solid wood boards, and then reinforce, so that the bed is more durable, and the finished bed made by the store is not fixed, and the reinforcement point will be relatively few, there is no problem at the moment, there may be a sound after a long time, so from this aspect alone, the bed made by carpentry is more advantageous.

2. The bed made by carpentry is relatively single, the overall look will be more rigid, and the decorative performance is average, and there are many types of finished beds in the store, including color, modeling, etc., which cannot be made by woodworking, so for the owners who want the room to look good, it is more suitable to go to the store to buy finished beds.

3. There are a lot of closed beds on the veneer that can be purchased, according to different brands, different materials, different processes, ** there are great differences, you can buy expensive ones with good economic conditions, and you can buy cheaper ones with general economic conditions, and the cost of woodworking beds is not cheap, first of all, the board will be bought, plus labor costs, it may be more expensive than the finished bed after completion, so it is recommended to compare more, and then choose cost-effective according to demand.

Good wooden bed: wax seepage cover.

1. Camphor wood.

The biggest feature of camphor wood is that it is rich in rich aroma, which can repel insects, prevent moth, mildew and sterilization, and mothballs are made by refining the spices in camphor wood. The diameter of the tree is large, the width of the wood is wide, and the pattern is beautiful. Camphor wood is fine, has a natural beautiful texture, tough texture, is not easy to break, and is not easy to crack, and is the preferred material for carving technology since ancient times.

Camphor wood is mainly used in the decoration of the back board of furniture, drawer board, especially suitcases, bookcases, cabinets, etc., China's camphor wood box is famous at home and abroad.

2. Walnut wood.

Walnut is a precious wood that is deeply loved by people, such as this precious walnut used in high-end European and American furniture. The hardness of walnut wood is medium to slightly hard and heavy, the fiber wheel structure is fine and uniform, and it has strong toughness, especially in the anti-vibration and anti-wear performance, and has a certain degree of bending and corrosion resistance. So this kind of wood is very good as the wood of the bed, because the bed is one of our very high utilization rates, so when choosing, we must choose a very good quality, which can bring benefits to everyone, and also allow us to sleep comfortably every day.