How can you tell if a vehicle can pass through a very narrow road, or if you can pass a car on a nar

By looking at the position of the left and right side mirrors, you can determine whether the width of the road can be passed.

The most accurate way is to stop the vehicle and go down to the site to investigate, which is safer.

Generally every driver will look for a signature thing, for example, your car wiper can be judged by it, or by the rearview mirror.

It's so troublesome, find someone who is wider than you, and it's over.

For people who often drive, they must be able to grasp the width of their vehicles, and they can judge in advance whether they can pass when crossing some very narrow roads, but it is not necessarily the case for novices, especially when passing some 10 tons or taking some rural roads, the vehicle is often prone to scratches or falls into the pit. If a novice wants to cross such a narrow road, he needs to straighten his vehicle first, observe the front and back of the car first, and be sure to slow down when crossing a very narrow road. <>

First, set the vehicle in the right place

In passing through the very narrow road so that the driver can first straighten the vehicle, if the body is inclined then it is very easy to cause the phenomenon of scratching behind, especially on some narrow roads ready to turn, be sure to pay attention to the gap between the front and rear wheels. Many novices may feel that as long as their front car can pass, the back will definitely pass, so they will confidently steer, and then it is easy to cause the angle difference and the rear wheel to scratch. Therefore, when walking on such a narrow road, the first thing to do is to make sure that the body in front of you can pass, and keep walking in a straight line, and wait until the body is completely past before turning.

2. Reduce the speed of the vehicle

When driving on rural roads, or on that kind of narrow road, the most worrying thing is to be able to drive, if you are an old driver, you will definitely pull over normally, but novices are not necessarily. When novices take this kind of road, they must put their eyes on the lane, first observe the distance between the two vehicles from the rearview mirror to determine whether they can pass normally, if they can't pass, they can get out of the car to check it, and then slowly slow down to open the distance between the two vehicles. <>

Under normal circumstances, driving on this very narrow road, the owner will have a general understanding of the width of the road surface and the width of the body, and the current vehicles are particularly high-tech, and there are 360-degree panoramic cameras when reversing or driving, so you can also pass through this very narrow road at low speed according to the trajectory line in the camera.

You can look at the width of the road, then look at the width of the vehicle, and if you are unsure, you can get out of the car to observe, or drive a little slower to see if he can pass; You can see it through the rearview mirror, if the rearview mirror is 40 50 cm away from both sides of the road, it is okay to pass, if it is less than 40 cm, it is not easy to pass.

It can be judged by the rearview mirror, but also by years of driving experience; Straighten the body first, observe the gap between the front and rear wheels, and then keep driving at a low speed, effectively observe the surrounding situation, and make judgments based on your own driving experience, or you can make accurate judgments based on panoramic images.

First of all, we must slow down the car, lean the car to the right, and then we have to see how long the distance between the left side of the car is, and we can also straighten the body and observe the difference between the front and rear wheels.

When driving a vehicle, you will encounter any kind of road. The most troublesome thing is to go on the narrow road. The distance between the two cars is large, and you are afraid that the right wheel will be crushed.

The distance between the two cars is small, and I am afraid of scratching. It's a real headache, especially for novice drivers with little driving experience. In fact, meeting a car on a narrow road mainly involves two issues, namely how to meet the car and how to judge the position of the right wheel, the core of which is the judgment of the position of the right wheel.

As long as the position of the right wheel can be accurately judged, you can try to increase the lateral distance with the opposite vehicle under the condition of ensuring your own safety, so as to ensure the safety of passing vehicles.

Encounter oncoming cars on narrow roads. The road is narrow enough for two cars to pass. In this case, newbies will definitely be scared.

A useful technique is to slow down when you see an oncoming car, but don't pull over and make room for the other person before you come up. Give yourself a safe space. The car on the opposite side arrived, so lean to the side first.

At this time, the space on your side will be slightly richer. As soon as you hit the direction, it's gone. Generally, there are two left-turn lanes, and the second left-turn lane in the middle can be turned around.

The left turn lane can make a U-turn without a no-U-turn and ensure safety signs. Another is not to obstruct the passage of other vehicles and pedestrians when making a U-turn. Paragraph 2 of Article 49 of the Regulations for the Implementation of the Road Traffic Safety Law of the People's Republic of China:

Motor vehicles may make a U-turn in places where there are no signs or markings prohibiting U-turns or left-turn markings, but they must not obstruct the passage of other vehicles and pedestrians in normal driving. "But if there is a guardrail at the intersection (the guardrail reaches the white line), don't make a U-turn when you turn left at a red light in China, because the U-turn is likely to be photographed and you will turn around when the green light comes.

If the guardrail is a few meters away from the white line, make a U-turn according to the above regulations. Because there are no actual reference points for narrow roads, most of them are based on our own experience, and most of our own experience comes from our driving on city roads. So don't take it seriously when walking on city roads, and learn how to judge the wheel base if you have the chance.

Due to the design of the vehicle, the rearview mirror is definitely the first to hit the obstacle, but generally we don't pay attention to the distance between the rearview mirror and the obstacle. Because the rearview mirror does not touch the ground, except for the rearview mirror, which is the tire, the position of the tire is important to the driver.

When encountering a very narrow road, you can get out of the car first to observe the situation, roughly compare the width, and be sure to leave enough turning radius, otherwise any problem is prone to scratching. After that, slow down and look at the rear mirror at all times to avoid scratching.

You can see if the width of the car is particularly wide, if it is not wide, it can be passed for general roads. Therefore, it needs to be measured well, and it needs to be done well**There are no other obstructive items.

The bottom of the heart should be for the width of the body have a number, first of all, the driver should have a rough judgment on the width of the road, because the driver is located on the left side of the vehicle, so the left side of the distance is definitely more calm than the right side, so the vehicle can be properly attached to the left. If we want to cross a two-meter-wide path with a width of 1,700 mm, we can pass.

Vehicles should be as straight as possible before entering the narrow road.

Straighten the body and observe the gap between the front and rear wheels. You can use a 360-degree camera, so you can take good measurements.

Generally, when returning to my hometown during the holiday, because the roads in the countryside are generally narrow, and there are houses or ditches on both sides of the road, this is a great test of the owner's judgment and driving ability. We can only move forward if we have properly assessed whether the vehicle can pass or not. Once the assessment is wrong, it is easy to drive off the road and cause the vehicle to be scratched.

So how can you make an accurate judgment? I'll tell you.

Clause. 1. Drive the car upright and observe the margins of the front and rear wheels.

When passing through narrow intersections in the countryside, be sure to straighten the body, because if it is tilted, it will increase the lateral width of the body. For very narrow roads, it is easy to cause scratches to the vehicle. And when the car is ready to turn on a narrow road, the first thing you need to do is observe the margins of the front and rear wheels.

A lot of newbies think that as long as the front wheel passes through an obstacle, it can turn. In fact, this thinking is very incorrect. When turning with the turn signal in advance, there will be a gap between the steering angle of the rear wheel and the front wheel, which is easy to increase the chance of scratching.

Therefore, the owner needs to make sure that the rear wheels pass through the obstacle before turning.

Clause. 2. Reduce your speed and observe your surroundings.

It is very necessary to drive at low speeds. When driving back to their hometown, many novice car owners are most worried about encountering oncoming cars. The old driver recommends that everyone maintain a normal posture, keep their eyes on the driving lane, and then observe the distance between the two sides through the rearview mirror to determine whether they can drive normally or avoid.

Clause. 3. Assess roads and vehicles.

Generally, when driving on narrow roads, car owners should make a rough judgment about the width of the road and the width of their own body, and then drive on the left. After all, the driver is more familiar and confident about the distance to the left side of the vehicle. If your vehicle is equipped with a 360-degree panoramic image, you can pass at low speeds depending on the road on both sides.

With these skillful driving skills, you can easily determine whether your car can be driven on narrow roads. It can be seen that driving in this environment not only tests the driver's driving skills, but also tests the driver's mentality. Only by maintaining a good attitude, not being nervous or panicking, can you proceed to the next step.

Finally, I would like to remind you that you should drive civilized and travel safely, thank you.

Generally speaking, drivers need to judge by the naked eye, if it is some novices, I recommend getting out of the car directly to check, after making a more general judgment, you can know whether the car can pass.

To judge the angle and direction, you should improve your driving skills, and if you can't judge the road, you should choose another road.

We should visually measure the distance between the car and the narrow road, and secondly, we should have a basic understanding of the approximate width of the body.

You can refer to other cars to see if the size of the car can pass, and you have to judge it yourself.

How do you know if the width of a narrow road vehicle can pass? First of all, the driver should have a rough judgment on the width of the road surface, and then estimate the road and body conditions, for example, the width of the road to be passed is two meters, and the width of the body is 1700mm, then it can be passed. In addition, the driver is located on the left side of the vehicle, so the distance between the left side is more relaxed than the right side, so the vehicle can pass appropriately to the left.

Filial piety is the precautions for cars passing through narrow roads: 1. Before entering the narrow road, the vehicle should be straightened as much as possible: if it enters obliquely, the width of the vehicle through it is reduced, so that the probability of collision will be greater.

2. The difference between the front and rear wheels should also be noted: when passing through some narrow doors and isolation piers, it is necessary to ensure that the rear wheels pass through and then carry out steering operations. 3. Make good use of the rearview mirror to observe the situation behind the car

Generally, after the front of the sedan passes, as long as the rearview mirror can pass, there is no problem in the back, because the rearview mirror of the sedan can basically cover the inner wheel difference. If you find that the rearview mirror is not in sufficient position after the front of the car, you need to reverse. 4. Probe observation if necessary:

If the above methods are still not at ease, you can lean in to observe, but if it doesn't work, you can stop and observe. Especially when you know how to drive, don't have a fluke mentality. 5. Reduce the speed of the vehicle

When driving in narrow lanes, slow down and distance yourself from the workshop to avoid scraping with other vehicles. Especially when passing through some narrow lanes full of cars on the side of the road, it is even more important to be vigilant and slow down, because there will be blind spots on the side of the road at this time. @2019

When encountering a narrow road, how to judge the width of the car and pass safely? Veteran drivers share these four experiences.

But all friends who have driven a car often encounter narrow roads, so narrow that they have to meet the car. Originally, the road was very wide, but it was made narrow because there were cars parked on both sides. At this time, many novice drivers can't know exactly whether they can successfully control the vehicle and drive steadily, maybe a mistake will make the body a face, but if their car is scratched, it is quite passable.

If you rub someone else's car again, then it's going to be troublesome. So how do you know if you can pass safely when you meet the car?

First of all, the road and vehicle condition are estimated. If the road is narrow, you should slow down, so keep the direction and pass slowly. Since the driver is located on the left side of the vehicle, the distance between the left side is definitely more relaxed than the right side, so the vehicle can be properly attached to the left.

If the car is too fast, the driver will not have much time to react, and it is more likely to scratch when passing through narrow lanes.

Second, the wheel gap should be well controlled. If our car needs a small change of direction when it meets the opposite car, then many people will think that as long as the front wheel steering is well controlled, and once the front wheel passes the other car, it is easy to play the steering wheel. But in fact, this kind of operation is the most likely to lead to scratching.

Therefore, when you can drive, you must ensure that the rear wheels are also passed before you can do the steering operation.

Then, look in the rearview mirror. After the front of the car passes, many people do not pay attention to whether the rearview mirror can pass, after the front of the ordinary car, only the rearview mirror can come over, and the front one is not troublesome, because the car's rearview mirror is based on the nature to cover up the inner wheel difference. If you find that the rearview mirror can't accompany the front of the car during the process, then reverse the car and start again, don't be too troublesome!

Finally, the probe observes. When passing through the narrow road, if the driver has been sitting in the car to observe or there is a blind spot, therefore, you can poke your head out of the window, so that the field of vision will be wider, see more clearly, and it will be easier to judge whether the car can pass through the narrow road, so that you will have more confidence in your heart. Especially when you want to meet the car, you can't take a little chance.

In summary, when meeting the car, leave a fair margin in advance, and you can't really park in place and let the other party pass first. Anticipate and prepare in advance, so as to prevent scratches as much as possible.