How to decorate the floor of the car?

With the continuous development of the economy, many cars have gotten rid of the shackles of tradition, refused to take care of the dirt in the car, and laid wooden floors in the car to make the car more classy. So, how to lay the wooden floor of the car shop, and what are the benefits of laying the wooden floor in the car to understand each other. How to make a base for car flooring, car flooring should be made with glue first.

The glue should be forked at the front and connected at the back, and the approximate position should be placed first.

In addition, before laying the floor, cut the screw holes on the floor glue, such as the air conditioning outlet, and other wiring ports, and then you can start crimping. This step is crucial to determine its flatness, and after it is done, you can start laying the floor. What are the benefits of laying wooden floors in the carThe effect of laying wooden floors in the car is very obvious, which can make the whole car look more classy and easier to take care of in the car.

Some clutter in traditional carpets is difficult to clean up, even with a vacuum cleaner.

It is also difficult to clean the feeling thoroughly, but after laying the wooden floor, you only need to wipe it with a damp towel. In addition, the wooden flooring in the car is more durable than traditional floor mats, and there is little need to replace the wooden floor, which needs to be replaced every one to two years. What do you need to pay attention to when choosing a commercial vehicle floor, pay attention to its quality when choosing a commercial vehicle floor, because there are many unprofessional places, and ordinary quality floors will be used to shoddy, or even some molded floors will be used to load the car.

Although molded flooring will be easier to install, the floor is thin and not hard enough, so it will warp, deform, loosen, and so on. The process of laying automotive floor adhesive is to remove the seats and then apply a layer of leather flooring to the floor. Each model has its own special purpose.

The advantage of installing the seat after it is laid is that it is dirty and easy to clean, and some good floor glue has a sound insulation function. The general reason is fluffy, dirty, and not easy to wipe, especially on rainy days.

When dirty, car floor adhesive refers to a layer of things laid on the bottom plate after the purchase of a new car, which is used to protect the health and cleanliness of the car.

The materials are not the same, and the workmanship is not the same. Generally there are leather, foam, etc. It is divided into an integrated glue, and the hand-sewing glue has its own advantages.

Floor adhesive is mainly used to keep the interior clean and beautiful, which can prevent dust and dirt from being left on it. Therefore, after bringing back a new car, most people will put a layer of waterproof and easy-to-scrub protection under the seat, which is floor glue.

Choose one that is easier to clean, put on mats to prevent the vehicle from getting dirty, and if you prefer, you can go to a tuning shop and install some lights.

1.Removing Old Carpets Most cars have carpets that are easy to remove, just remove the wear plates from the door frame and pull out the carpet. However, there are also vehicles that require the removal of the seat, seat belt and footrest.

To choose the right mat for the car model Depending on the model, the shape of the floor on the driving side varies. In order to better fit the contour of the side floor of the model, the owner should choose a special car type, and try to avoid choosing a universal type of floor mat so that the fit is not high.

First, apply a car-specific paint finish to the car floor, and then lay a carpet on top of it to make it look good.

In fact, you can choose a decoration of the length that suits your floor, and try to put a layer of carpet underneath, also to protect the vehicle.

The general practice of car floor decoration is no different from normal floor laying, except that his space is smaller.

If you want to decorate the floor well, we can decorate it according to your preference.

Find a better professional, choose the best flooring, to ensure the quality, the appearance is perfect.

Dismantle the seat: Use the special inner six plum wrench to disassemble the front two and rear seats, note that the main driver's seat. Remember the screw holes, air conditioning outlets, and other wiring ports on the floor before covering the floor.

It is recommended to buy a fully enclosed floor mat paving truck without floor glue. Car floor mats should preferably have a dedicated surround for safety. The fully enclosed mat is generally made of leather, wear-resistant and dirt-resistant, with leather texture, beautiful and fashionable, and it is best to completely enclose the leather silk loop.

A wire loop pad has been added to the complete envelopment of the foot pad. The wire coil material is soft and comfortable, which can relieve driving fatigue, and has the effect of adsorbing and hiding dirt, which is easy to clean.

Does a new car need chassis armor, for most people, one of the things that must be done after the car is brought back is to take a picture of the car. And with the improvement of people's concept of vehicle maintenance, more and more people will choose to protect the chassis armor of the car. However, since we can't usually see the chassis, even if we make chassis armor, we can't intuitively know how much protection it has.

Some people think that it is necessary to do chassis armor, some people do it out of psychological comfort, it is not clear whether it has any effect, and some people think that chassis armor is a waste of money, and today I will talk about these controversies.

First of all, we need to clarify the concept of chassis armor. The chassis armor we often say is a popular name, its scientific name is anti-collision and anti-rust sound insulation primer, a special elastic colloidal material, sprayed on the chassis with a general thickness of millimeters, and then naturally consolidated to form a chassis protective layer. So the chassis armor is paint, not a guard plate.

Because it protects the chassis to a certain extent, like wearing armor, it is called chassis armor, but it is just a layer of paint, not steel or iron. After defining the concept of chassis armor, let's talk about the use after spraying.

Since it is like armor, what kind of protection will it give to the vehicle after spraying, the main function is anti-rust, anti-corrosion and anti-microbottom. There are a few other accessibility features in addition to this. The biggest role of chassis armor is to prevent rust and corrosion.

First of all, because the chassis is covered by sprayed protective paint, this paint surface can isolate other impurities on the road surface, such as rain and snow snow remover and oil stains, which will cause a certain degree of rust and corrosion to the chassis. So compared with a car that has never made chassis armor, the anti-rust and anti-corrosion effect will definitely be better.

It can reduce the impact of small stones on the chassis. Secondly, because the protective paint itself has a thickness of millimeters, when the raised pebbles on the road surface hit the chassis, it will also reduce the impact on the chassis to a certain extent, including less damage when the bottom is slightly supported. The chassis armor could not resist serious bottom supports.

Note that it is a slight bottom brace, because if the chassis is subjected to a strong impact, this layer of paint protection is also ineffective and needs to be repaired. Noise can be reduced theoretically.

Yes, many friends usually travel in extreme conditions, and the carpet in the car is often stained, so they want to modify their own car with a set of wood flooring that is very easy to clean. But many people can't tell the difference between the vehicle floor glue carpet, let's talk to everyone about the difference between the floor glue and the carpet!

Vehicle floor glue carpet difference.

Floor glue: Floor glue generally refers to a kind of protective mat made of plastic on the tatami floor of the vehicle, and the floor glue is divided into two kinds, one is cut on the spot by the car decoration store, there are many levels, and the quality of the plastic is not very good. In addition, one is dedicated to a forming car, this kind of floor glue is more catering, and it is more convenient and more beautiful when assembling.

When installing the floor glue, all the car seats must be removed, which is very inconvenient when installing.

Carpet: Car mat and carpet are actually the same item, the carpet fabric is very thick and thin, and there is also a plastic or vulcanized rubber, which is completely transparent or opaque. Plastic carpets are much easier to clean than nubuck leather carpets, but they don't look as classy.

Is it necessary to modify the wooden floor of a car?

It depends. If you have to travel in dirty or cold and humid areas, then retrofitting a layer of floor glue can bring a good practical effect of moisture and stain resistance, and it is also very easy to clean the inside of the car. If you usually drive in a big city, then there is no need to modify the car floor glue, after all, the modified floor rubber must remove all the seats in the car, which is relatively inconvenient to install.

How to use vehicle floor glue.

1. Disassemble all the seats in the car first, and special attention must be paid to the fact that if your front seat is an electric seat, you must also pull out the power plug and then get the seat;

2. Use a vacuum cleaner to suck all the dust and dirt in the cargo box to ensure that there is not too much dust in the car;

3. Spread the floor glue that is compatible with the original in the car, and then use the software to cut out the floor glue on the seat mounting hole;

4. Press the edge of the rubber into the plastic under the threshold, and then peel off a little to expose the gap and stuff it into the rubber, and finally install the seat.

It is necessary to do it, because laying the floor can achieve the effect of sound insulation, it is also conducive to cleaning, and the waterproofness is also better.

I don't think it's necessary, after all, the floor of the car is just a place that is often used to step on, and you don't have to bother to do a lot of decoration, otherwise it's just a waste.

There is no need to do it, because it is just a decoration and does not have any other protective effect, so there is no need.

Depending on your personal preference, you can also do the floor decoration of the car, and it will look more beautiful.

With the continuous development of the economy, many cars are now free from the traditional shackles, refuse to take care of the dirty inside the car, and lay wooden floors in the car messy keys to make the car more classy. So, how to lay a base for the wooden floor of the car? What are the benefits of wooden flooring in the car?

Let's find out together.

The wooden floor of the car should be used as a base for the floor glue, and the floor glue should be forked in the front, and the conjoined body should be in the back, and the approximate position should be placed first. In addition, before covering the floor, the screw holes, air conditioning outlets and other wiring ports should be cut out on the floor glue, and then you can start to press the edge, this step is very critical, determine its flatness, and you can start laying the floor after you finish it.

What are the benefits of wooden flooring in the car?

The wooden floor in the car is very obvious from the effect, which can make the whole car look more classy, and it will be easier to take care of the car. Traditional blankets are very difficult to clean up if there are some debris, even if you use a vacuum cleaner to clean them thoroughly, but after laying the wooden floor, you only need to wipe it with a damp towel. In addition, the wooden floor in the car is more durable than the traditional floor mats, and the wooden floors basically do not need to be replaced, while the floor mats need to be replaced every one to two years.

What to pay attention to when choosing a commercial vehicle wood flooring.

When choosing a commercial vehicle floor, we should pay attention to its quality, because there are many unprofessional places to accompany the trouble, and the average quality floor will be selected to be shoddy, and even some molding floors will be used to load the car. Although the molded floor will be more convenient to install, this kind of floor is very thin, and the hardness is not enough, and it will warp, deform, loosen and other phenomena after time.

Article summary: The above is all about how to lay the bottom of the wooden floor in the car and what are the benefits of the wooden socks in the car, I hope it will be helpful to you. If you want to know more about it, please stay tuned to Qeeka Home.

It is better to have a car mat or a special car full surrounding.

The full-enveloping mats are generally made of leather, wear-resistant and dirt-resistant, with leather texture, beautiful and fashionable;

The full envelopment leather + wire ring is better, on the basis of the full enveloping foot pad, a wire ring cushion is added, the silk ring material is soft and comfortable, which can relieve driving fatigue, and has the effect of absorbing dirt and hiding dirt, and it is also easy to clean.

It is not called a car floor, it is called chassis armor, and a substance similar to asphalt is sprayed under the chassis to play the role of sound insulation and rust prevention. Generally, the car is equipped with the factory, if there is no construction, the brand has Henkel, etc. Maybe you're talking about laying floors and buying a good pair of waterproof mats.

First of all, protect the things you remove, especially not to get dirty, placed neatly, the owner is very concerned about these, it is best to use professional protection tools, clean when paving, the floor leather cut is reasonable and can be modified, small on the trouble, do not miss the trimming of small corners, the owner can find.

Installation process. 1. Clean up the inside of the car to ensure that there is no debris in the operating area;

2. Disassemble the seat in the car;

3. Clean the car thoroughly again to ensure that the floor is clean and dust-free;

4. Lay the floor well, pay attention to every part, and there can be no protrusions;

5. Install the original car seat;

6. The owner's belongings are in place;

7. Clean the body and interior of the car.

Thank you for adopting!!

Chinese like to use wooden furniture to show the taste and connotation of decoration. Even the interior of the car has many mounting planks. However, imitation wood planks are imitations after all.

In order to hide their pride, many friends likeCars are equipped with wooden floors。Extravagance exists, danger is unconscious.

Now there are people who buy a car and blindly choose some products to install, without thinking about the consequences at all. In view of the fact that some wooden floors in the market are installed in cars, we have replaced the wooden flooring installed on cars. We've done some research:

Most of the wooden flooring is made of plywood 5 mm thick, one board is cut and taped to the bottom of the car. Wooden flooring is installed on the floor of the family room and on the car, which is not safe. Why.

Here's an analysis. Install at home, because the home will not move,Cars are equipped with wooden floors, because the car gives the people who use it every day to move every day. People who drive can't guarantee that you won't hit someone else, and they won't hit you either.

If a car collides, the plank will tip over. The hardness of the 5 mm plate is very high. If a car collides, it will be as sharp as a knife.

The planks are sewn together one by one. It's horrible. I once asked a manufacturer who sells wooden car mats.

"When it actually happens, you can't find the product," he said. The law does not stipulate what liability you will be liable for selling a product. "He can make money as long as the customer needs it, no matter how much he does!

I ask - did you load the car yourself? He saidCars are equipped with wooden floorsWhat is the reason? The first time it was uncomfortable, and the second stage crash was really dangerous, especially when there were a lot of people in the car.

Here I would like to advise some owners who just want to look good and ignore safety. Don't be inCars are equipped with wooden floors。Some areas have banned the use of hard items such as perfume seats in the instrument room.

Summary:Cars are equipped with wooden floorsThe safety factor will be reduced, and there will even be fatal danger. Because the wooden floor is installed at home, there is no state of movement; Cars are equipped with wooden floors, in motion every day, because it is difficult to guarantee that there are no collisions in motion.

Once a vehicle collides, a wooden floor will appear. The hardness of 5mm wooden flooring is very high. If a vehicle collides with a car, it will be as sharp as a knife.

The planks are patches that will be scattered everywhere under the impact, and dozens of wooden floors with a hardness of up to 5 mm thick are scattered around like blades, soCars are equipped with wooden floorsIt's a very dangerous thing.

You can get it for free