Do you need to put ceramsite in the root control pot for raising flowers?

There is no need to put ceramsite in the root control pot for raising flowers. You can choose a small basin.

For example, Wenzhu. It is a green plant that is particularly easy to grow roots, and its root control method is to use small potted plants.

Planting, using sand and ceramsite can increase the air permeability of the soil, which is not easy to compact, and is conducive to photosynthesis of plants.

When absorbing more climate dioxide, the growth is better.

Put ceramsite in the pot, mainly to breathe, reduce the garden soil (the maintenance of large potted plants requires a lot of garden soil, for the building to raise flowers is also to invest a lot of money to buy nutrient soil.

use of the volume, cost savings. The second is water, because the garden soil in the process of watering, the formation of mud, the bottom of the pot is closed, resulting in serious water accumulation in the pot, so that the flower roots rot, the flowers naturally appear yellow leaves, rotten leaves, the whole plant slowly withered, and finally the flowers died. At the bottom of the pot, put some ceramsite, messy hair, pine twigs, furnace ash, and small foam pieces to permeate water and breathe, increase the soil quality of vegetables and loosen the soil, so that flowers and green plants can absorb air from the bottom space, so that the foundation does not rot and grows more lush.

When planting flowers and plants, it is customary to spread ceramsite or blocks on the bottom of the pot, in order to increase the air permeability and water permeability of the plants, and prevent the poor growth and decay of the root system. So should you put ceramsite in the root control pot for raising flowers?

I think it's better to put a little ceramsite at the bottom of the pot.

Secondly: the purpose of the root control pot is to let the plant grow down, and this pot also has the effect of breaking the roots, a taproot grows to the bottom of the pot, and the other small roots drilled out of the side holes, and finally there is no moisture and soil moisture, can not absorb nutrients, and finally are dead roots. The taproot will sprout a lot of roots and absorb nutrients to the fullest.

Three: Putting ceramsite at the bottom of the root control pot can prevent the rotten roots of the plant, increase air circulation, absorb water and lock the water, so as to achieve the purpose of meeting the healthy growth of the plant.

Four: The last direct reason is not to let the root system of the plant grow down or around the bottom of the pot.

The above is my sharing, it is recommended to spread a layer of ceramsite at the bottom of the root control pot to let the plant grow in a healthier direction, I hope it will help you.

I don't think so. Because the usual soil can make these flowers grow very well.

The purpose of the root control pot for raising flowers can be placed ceramsite, the purpose is to increase the air permeability and water permeability of the plant, and prevent the poor growth and decay of the root system.

It should be placed, because if you put a little ceramsite, it will be more conducive to their growth.

It is good to put ceramsite on the surface of the pot soil, and the air permeability of the ceramsite is strong, and the ceramsite on the surface of the soil can keep the pot soil moist, which is conducive to the respiration and growth of the root system of flowers and plants. In the process of laying ceramsite, it is necessary to pay attention to the amount of ceramsite, and do not spread excessive ceramsite on the surface of the soil, otherwise the root system of flowers and plants can not grow normally.

Ceramsite is a ceramic particle, the shape is more rounded, the color is more, mostly gray-black or blue-gray. The ceramsite is mostly round and granular, with strong air permeability, which is suitable for planting flowers and plants. Putting an appropriate amount of ceramsite on the surface layer of the soil of the pot can enhance the air permeability of the soil, make the soil more loose, and be conducive to the growth of the root system of flowers and plants.

The permeability and drainage performance of ceramsite is good, which is conducive to the respiration and stretching of the root system of flowers and plants. Ceramsite can be paved or mated, and can also be used as a cultivation medium, which is extremely beneficial to the growth of flowers and plants. If it is paved, the sterilized ceramsite can be spread on the surface of the potting soil, which can keep the potting soil moist and promote the growth of the root system.

Ceramsite can also be placed on the bottom of the pot, and 1 2 layers of ceramsite can be laid on the bottom of the pot. After laying, you can put the loose and breathable soil in the potting soil and move the flowers and plants into the pot. After transplanting, the soil can be soaked with appropriate amount of watering, and the bottom ceramsite can prevent water accumulation at the bottom of the pot and avoid root rot of flowers and plants.

Ceramsite can also be used as a cultivation medium, during the hydroponic plant, the ceramsite is placed on the hydroponic container, the ceramsite can fix the plant, but also conducive to the growth of the plant. There are many uses for ceramsite, but it should be used in moderation. If it is used for paving, it is not possible to spread too much ceramsite on the surface of the soil, otherwise it will affect the growth of the roots of flowers and plants.

1. Breathable and permeable: There are some voids in the ceramsite, and there are many holes inside, which are not solid, so it can play the role of air permeability and water permeability, not too stuffy, and can maintain the hydrophobicity of the soil.

2. Water and fertilizer retention: ceramsite not only has the effect of breathability and water permeability, but also has a good water and fertilizer retention effect because of its own characteristics, which can absorb some water and nutrients, fill it into its own structure, and gradually release it in the later stage.

3. Beautiful and splash-proof: ceramsite also has a certain aesthetics, can be spread on the surface, and can also avoid splashing out of the soil in the pot when watering.

Answer pro, ceramsite is mainly a lot of dense and small pores inside, can store a lot of water well, of course, the gap between the ceramsite is very large, so there is good water permeability, flower raising will use ceramsite, can play a role in twice the effect with half the effort. 2. Ceramsite has good permeability, when maintaining potted plants, we can spread a layer of ceramsite at the bottom of the pot, so that after each watering, it can have great permeability to ensure that the water can be quickly dissipated, of course, because the ceramsite can store a lot of water, so the ceramsite can avoid half of the water at the bottom of the pot, and the half of the water is very serious, which will lead to the root system of empty roots without vitality, and the use of ceramsite as a permeable layer is much better than directly using bricks and tiles to pave the hole at the bottom of the pot.

Pro, another use of ceramsite is as a paving on the surface of the pot, which is also called a pot, ceramsite is very good to do pots, there is enough moisturizing capacity, to avoid dehydration on the surface of the pot, to bring great convenience to watering, in the pot surface of the pottery, there is a role to avoid watering washing, the pot soil brewing, of course, there is an aesthetic effect, but here I want to emphasize that the ceramsite is relatively wet and heavy, orchids and the like are not recommended to use, bonsai is still OK, when choosing ceramsite, It is necessary to reasonably select the coarse and fine size particles to avoid excessive size of the particles and cause too wet weight and let the root system rot.

Ceramsite flowers can be raised for three or five years.

Whether it's landscaping, or indoor potted plants.

Ceramsite can be used, but it is best not to spread it on the soil. Because when raising flowers indoors, the evaporation of water is relatively slow, if there are too many ceramsite grains on the soil surface, it will hinder the water from volatilizing in time, which is not conducive to the growth of plants.

Ceramsite is generally cushioned at the bottom of the soil, which can be used as a water barrier, and can also increase the air permeability of the soil, so that the root system of plants can grow better.

The ceramsite itself has many holes and is very lightweight, and it is also very suitable for holding hydroponic plants, so if you are going to propagate some ornamental plants with hydroponic cuttings, you may want to use ceramsite.

Precautions for raising flowers in ceramsite.

When raising flowers, pay attention not to place the ceramsite on the pot surface of the flower, because the water retention of the ceramsite is very good, and the ceramsite is placed on the surface of the pot, which is not conducive to the evaporation of excess water in the soil, which will lead to the accumulation of water in the pot, and for a long time, it is easy to cause the root system of the flower to rot.

Be careful not to mix ceramsite in the soil, because the water retention of ceramsite is too good, even if the diameter of the ceramsite is mixed in the soil of flowers, it will also cause the soil of flowers to be very moist, and the environment of high humidity for a long time is easy to cause flowers to stuffy roots, so it is not recommended to mix ceramsite in the soil.

I suggest you try it like this:

1.Let the ceramsite be used as a water filter layer: put it at the bottom and spread it 1-2 cm thick to prevent the plant roots from standing up and dying;

2.Or let ceramsite be used as a cultivation medium: because ceramsite is an inert inorganic cultivation medium, it can be placed in hydroponics to fix the plant. This usage is of the same nature as glass balls, vermiculite, etc.;

3.It can also be used for paving: If you use ceramsite for paving, especially for some large potted plants, it is used to keep the soil surface moist, and other paving is the same property.

Ceramsite can also be used to raise flowers, because it itself is very light, and there are many holes, generally spread ceramsite under the soil, which can increase air permeability, and also have a certain water retention effect, which can make the plant roots grow better.

After adding ceramsite to the orchid pot soil, you need to add a little "it" to make the root system grow more robust!

Ceramsite has excellent properties, such as low density, high cylinder compressive strength, high porosity, high softening coefficient, good frost resistance, excellent alkali aggregate reactivity, etc. Placed on top of the flower pot, it is used for drainage and ventilation, and the pavement is also beautiful.

The function of putting ceramsite on the pot is to absorb water.

The harm of putting ceramsite in a pot is to affect the ventilation of plant rhizomes, and it will also absorb excess water, resulting in water that cannot be dispersed.

Ceramsite refers to the ceramic particles, most of which are round or oval spheres in appearance, and also have irregular gravel shapes, which are generally used to replace gravel and pebbles in concrete, with dark red, ochre red cavities, gray-yellow, etc., with a diameter of 5-20 mm.

When potting plants, the advantage of putting ceramsite is to prevent the drain hole at the bottom of the pot from being blocked, enhance the permeability and air permeability of the pot soil, and at the same time can raise the soil layer, and the flowers suitable for shallow pot planting can only be planted in deep pots, and the disadvantage is to reduce the water retention of the flower soil and affect the development of the root system of flowers and plants.

Aquatic plants and water-retaining potted plants can not use ceramsite, aquatic plants themselves grow in water, water quality is the basic factor for survival, if you put ceramsite in the water, it is difficult to promote the growth of aquatic plants, and the main requirement of water-retaining potted plants for potting soil is strong water retention, and putting ceramsite is easy to cause plants to lose water and wilt.

How to grow flowers in pots

1. Prepare soil.

Before planting flowers, it is necessary to prepare suitable soil, it is best to use soil with strong air permeability and good drainage conditions, which can be mixed with mud and sand, ordinary garden soil and humus soil to provide a soft and transparent growth environment for flowers.

2. Treat seedlings.

Before the flowers are potted, they should be pruned and disinfected, prepare a pair of sterilized scissors, cut off the yellowed and wilted leaves and rhizomes, and then soak the flower seedlings in disinfectant water, and finally take them out and put them in a cool place.

3. Planting process.

When planting flowers in a pot, you should first lay gravel or tiles at the bottom of the pot, put two-thirds of the soil, and then plant the seedlings into the soil, fill the root system with the remaining soil, and give the seedlings a root water.