If underfloor heating is installed, does the floor need laminate flooring?

Effects of underfloor heating on the ground:With floor heating, heat is dissipated from the ground to the room, so the ground is dry, and the temperature is about 30-40 degrees, and the temperature is relatively high. If the floor is made of wood, it is easy to expand and deform by heat, and the dry environment is also easy to cause dehydration and cracking.

However, it should be noted that the core material of some three-layer solid wood flooring is not suitable for geothermal heating in terms of matching the surface material, and it is easy to deform in the case of alternating cold and heat. It must be suitable for underfloor heating, with the correct installation. Laminate flooring:

It can't be used casually, some laminate flooring has just reached the environmental protection standard, but in the case of floor heating, formaldehyde emission may increase.

<> laminate flooring is mainly worried about two aspects, 1. Formaldehyde emissions, after the national standard is improved, the general workers can meet the standard, and the good floor is more than the national standard, which can be fully applied to the requirements of floor heating. 2. Anti-deformation, laminate flooring is no problem, and heat conduction is faster. It is recommended that consumers choose better or regular manufacturers' products.

Laminate flooring for floor heating is definitely not good, laminate flooring is easy to deform, and it is easier to deform when the floor heating is baked. Second, when installing the floor, the bottom layer must be used with their manufacturer's special moisture-proof film, the film of the floor packaging must be cleaned up, and the baseboard sealant must be selected as a good brand. We often focus on the environmental protection of the floor, in fact, these auxiliary materials will volatilize the components that are not conducive to environmental protection after being heated underneath.

It is not recommended to use laminate flooring for floor heating, because although laminate flooring belongs to wood flooring, it is definitely not comparable to solid wood and multi-layer solid wood flooring. The lowest level is synthetic wood flooring. Solid wood is a pure natural wood floor, home first, solid wood multi-layer can also be used for floor heating, but the laminate board may be prone to dry cracking, deformation, groove and other phenomena after surface floor heating conduction!

Formaldehyde will not be ideal either! In this way, they can turn on their own boiler for heating during the overall winter, so that they can live a comfortable winter life and say goodbye to the long and wet winter in the south. So, for the new house is not equipped with floor heating, what are the construction steps of floor heating installation?

It is completely unnecessary, because underfloor heating does not affect the strength of the floor, and the most ordinary flooring will do.

Laminate flooring can be used for underfloor heating, but parquet is recommended. Because the formaldehyde content in laminate flooring volatilizes at high temperatures, it has an impact on the body.

It is not necessary to use laminate flooring, if laminate flooring is used, it will lead to uneven heat transmission of floor heating, resulting in the overall temperature in the room cannot go up, from this point of view, there is no need to use laminate flooring.

No, you don't. If you install floor heating, you can smooth it with cement floor, so that you can also achieve the corresponding effect and heat evenly.

No, because the underfloor heating is installed under the floor, and there will be sand between the underfloor heating and the floor, so it will not harm the floor.

Yes, in the process of long-term heat release, the floor will be seriously damaged, and the ordinary wooden floor will gradually dry out and crack, and curl up and fall off.

Floor heating does not require a dedicated laminate floor, but it requires a low-temperature hot water floor heating (referred to as floor heating), and the floor heating floor measures the real floor heating floor requires many specific technical parameters. First of all, it must have good heat dissipation.

Floor heating floors are very particular about the choice of materials, and those special substrates that meet the requirements of wood density are strictly selected. The thickness of the floor is between millimeters (the standard thickness of geothermal floors) to ensure that the floor has good air permeability and heat dissipation function; The characteristic is heat resistance; Environmental protection, how to determine the formaldehyde emission index of composite floor heating, or if to judge how to achieve the characteristic requirements of 100% environmental protection arrangement for pure solid wood floor heating floor. The fourth is security.

There is no need for a dedicated floor, and it is better to choose parquet instead of laminate flooring for underfloor heating.

The choice of geothermal floor should be decided according to the particularity of the geothermal heating method: to adapt to the repeated change of cold and heat and to facilitate heat conduction. First, the geothermal floor should first have a small amount of deformation; Second, it should be conducive to heat conduction; Third, moisture-resistant and waterproof.

Under the same environmental conditions, the deformation of solid wood flooring is greater than that of laminate flooring, and the deformation of laminate flooring is greater than that of multi-layer parquet. The reason for the small deformation of multi-layer parquet used for geothermal heating is that its substrate is staggered horizontally and vertically between each layer, and each other is contained; There are also dense anti-deformation grooves on the back, which dissolve the stresses generated by the heating surface, so that it has minimal deformation. The deformation of the wooden floor from large to small is as follows:

Hardwood flooring》Laminate flooring》Parquet.

The thermal conductivity of the floor is related to the thickness of the floor, and the thickness of multi-layer parquet is about the same as that of laminate flooring, however, the anti-deformation groove on its back is conducive to air circulation, reduces noise, and the thermal conductivity is better than that of laminate flooring. The thermal conductivity of wood flooring materials is arranged in order from large to small: parquet "laminate flooring" solid wood flooring.

In winter, when the interior is dry, it will generally become humidified, and the moisture and water resistance of the floor is equally important. The parquet is specially treated, and the sample is soaked in water for 3-5 days without obvious deformation; Even if a large amount of water runs on the ground after installation, and the arch is soaked, as long as the doors and windows are opened and the air circulation is maintained, it will soon be restored to its original state, which solves the customer's worries that the customer cannot recover after laying other floors when encountering water. In terms of moisture resistance and water resistance, parquet is significantly superior to other categories of flooring.

No, you can use a floor with less thermal deformation, preferably a hardness parquet. Solid wood floors are easy to deform when heated, and are generally not used for floor heating.

There is no need for a special one, just a general composite floor, of course, choose a special wood floor with better thermal conductivity, in fact, it is not too bad.

Floor heating must be dedicated to the floor, solid wood, composite have special floor heating!

Summary. Hello dear, you can have underfloor heating and laminate flooring. Although laminate flooring can be used for underfloor heating, it is recommended to use parquet.

Because the formaldehyde content in laminate flooring volatilizes at high temperatures, it has an impact on the body. In addition, the thermal conductivity of wood floors is poor, and users of the same floor heating tiles will be warmer compared to ceramic tiles. And the wooden floor is easy to deform, especially the solid wood floor, if it is added to the floor heating deformation, it may increase.

Hello dear, you can have floor heating and you can lay a reinforced composite ear wood floor. Although laminate flooring can be used for underfloor heating, it is recommended to use parquet. Because the formaldehyde content in the parennial laminate flooring has an impact on the body when volatilized at high temperatures.

In addition, the thermal conductivity of wood floors is poor, and users of the same floor heating tiles will be warmer compared to ceramic tiles. And the wooden floor is easy to deform, especially the solid wood floor, if it is added to the floor heating deformation, it may increase.

The advantages of laminate flooring are: 1. Compared with traditional flooring, the specifications are larger, which is both an advantage and a disadvantage. 2. There are many colors, wide lines, and a wide range of choices, which is a good choice.

3. Compared with ordinary flooring, it is wear-resistant, high hardness and superior performance, and is favored by consumers. 4. Easy to install, form a precise bite joint, no glue required. 5. Cost-effective, in line with the general consumption level.

6. Easy to care, when there are stains in the stove hole, wipe it with a cloth dipped in a small amount of detergent.

Hello dear, this is the first wave of infection, the form is quite severe, please pay attention to protect yourself. From now on, the health of myself and my family, as well as the responsibility for prevention and control measures, will depend on the common sense, experience and cognition that I have accumulated on my <>

Have I answered the above questions clearly? If you don't understand something, please call at any time, and the mentor will provide you with satisfactory service as soon as possible, and wish you a happy and happy <> every day

Give it a try, please give a thumbs up to the lower corner of the left bye, and there will be a reward for Baihan Celebration today<>

It is not recommended, wooden floors and tiles are fine.

It is best not to choose pure solid wood flooring for floor heating, you can consider solid wood flooring. Among them, the parquet floor should be as few layers as possible, and the three-layer solid wood composite is the best.

If you live above the second floor, it is recommended to have a wooden floor, and the suspended pavement will lay a layer of moisture-proof floor mat under the floor, which is not only moisture-proof, but also has a certain sound reduction effect, and will avoid a lot of small troubles that disturb the people in life. Rising Sun Economic and Trade will answer for you.

If it is installed on underfloor heating, laminate flooring parquet is OK, because both floors are treated with moisture resistance. But pure solid wood flooring cannot, because there will be some moisture in the floor heating, pure solid wood flooring is painted on the surface of the whole board, if it is damp, it is easy to deform, affecting the service life of the floor.

There is no problem with the home decoration board made by the big factory, and you can learn about the wooden flooring of the "Kai brand".