How to repair the rotten washbasin, can you replace the broken washbasin

Wash basins (wash basins, bathtubs, sinks, etc.) will inevitably leak and clog after a long time, or the water drain bouncing device is not working, in fact, it is easy to replace the water drainer by yourself by mastering the method. (Only the installation method is introduced here, and the reverse operation can be done if it is removed).

Tool raw material drainer, universal tongs, raw material belt, glass glue.

Method: Read step by step.

Prepare universal pliers (ordinary wrench stroke is not enough, can not disassemble the drain) to wrap the raw material belt on the drainer, which can be slightly thicker, and the raw material belt can strengthen the sealing of the pipe thread and prevent water leakage. (The drainer has two sealing rings, one in the upper part of the pool and one in the lower part of the pool, and the raw meal is wrapped between the two sealing rings).

The lower sealing ring is coated with glass glue (the sealing between the lower sealing ring and the ceramic is not very good, and glass glue is needed to strengthen the anti-seepage function).

Tighten the copper nut with universal pliers on the lower part of the wash tray. (Generally, it is counterclockwise when dismantling, and clockwise when installing) install the connection section between the drainer and the drain pipe.

Put the water into the pool and check whether the airtightness and drainage are good, and whether the bottom of the basin is leaking.

I hope the subject and netizens are grateful.

It's good to buy glue and stick it, there are many special glues on the market, you tell what it's used for, and the store will know which one to buy.

A basin doesn't cost much, so it's worth replacing it with a new one.

The washbasin is broken and can be replaced. As long as you measure the size of the porcelain basin and buy a new porcelain basin on the market to replace it, there are many brands of domestic bathroom facilities, and the service quality of many brands.

Generally, there are three situations when the washbasin is broken, if the basin is leaking, it may be that the glass glue at the sealing place falls off, in this case, you only need to find the water seepage and seal it with glass glue again, if the sewer pipe is broken, use the raw material tape to wrap the leakage first, and then call the pipe repairer to change the sewer pipe.

The material of the washbasin cabinet

Solid wood plankIf the washbasin cabinet you choose is made of solid wood, be sure to ask whether it has been waterproofed. Generally speaking, in the production process, the solid wood should be washed with copper oil first, and then spliced together in small pieces, so as to achieve a moisture-proof and waterproof effect, if it is a bathroom cabinet made of a whole solid wood plank, after a few years, the washbasin cabinet will definitely blister on the surface, uneven, and thus super broken.

The mainstream substrate used in the washbasin cabinet on the market is waterproof MDF, which is a kind of steel board processed from selected wood raw materials into powder. Its strength density is divided into high, medium and low, and the waterproof performance is excellent, which is a must for high-end bathroom cabinets. Put the sealed MDF in water for 48 hours, and it will still be the same when you take it out.

Tile patches, adhesive tape, gloves, and stirring sticks are required, as follows:

1. First of all, prepare the tools shown in the figure below: tile repair agent, adhesive tape, gloves, stirring stick, and then clean the construction platform.

2. Then use a stirring stick to take out two bottles of AB solvent of the repair agent according to 1:1, take out the same amount, and put them on the waste cardboard for stirring and mixing.

3. Then apply the stirred and mixed repair agent to the surface to be repaired, if the cavity is too large, the bottom layer needs to be filled with putty powder and then coated with the repair agent.

4. After repairing, wipe off the excess glue with a tissue dipped in alcohol or toilet water, and the construction is completed.

5. With the above methods, the comparison before and after repair can be seen to be remarkable.

Dear, I'm glad to answer for you: what to do if the kitchen sink falls off Answer: first remove the glue at the joint, and then wipe the marble glue on the plate, put the curing agent in accordance with the ratio of 10:1, and also wipe it at the interface of the basin under the counter.

Next, put the basin on it, hold it with an object to ensure that it does not fall off within 24 hours, and finally apply glass glue in the gap between the basin and the countertop. A modern kitchen is a room where food can be prepared and cooked, and a modern kitchen usually includes a stove (gas stove, electric stove, microwave oven or oven), countertop (sink or dishwasher) and food storage equipment (e.g. refrigerator, freezer).

Summary. What to do if the kitchen sink falls off: Hello!

Glad for your question. Washing basins that come off can be glued. Step 1: Clean up oil, moisture, dust and dirt; Step 2, use an abrasive cloth to polish the surface to be pasted to ensure high strength when pasting; Step 3: Paste with marble glue or glass glue.

Precautions: Glass glue should be used anti-mildew and quick-drying neutral glue, marble glue slightly increase the content of curing agent as appropriate, but should not be moved or used halfway, wait for 24 hours before use.

What to do if the kitchen sink falls off.

Good. What to do if the kitchen sink falls off: Hello!

Glad for your question. Washing basins that come off can be glued. Step 1: Clean up oil, moisture, dust and dirt; Step 2, use an abrasive cloth to polish the surface to be pasted to ensure high strength when pasting; Step 3: Paste with marble glue or glass glue.

Precautions: Glass glue should be used anti-mildew and quick-drying neutral glue, marble glue slightly increase the content of curing agent as appropriate, but should not be moved or used halfway, wait for 24 hours before use.

Is there a master to help you get it?

Dear, what is ** on your side, I'll help you check if there is a maintenance master.

Summary. Hello, glad to answer for you. If the gap is not large, you can directly repair it with white cement and stick it directly to the gap.

You can also use glass glue and apply it directly to the crevices to allow it to cure. You can also use ceramic metal repair agent where the gap is very prominent, you can directly use glass glue to repair, gently apply it to the gap, let it dry, and after it is fully cured, use a knife to remove the excess glue marks. However, repairing with glass glue will affect hand washing, and the glue should be mixed according to the relevant proportion, and then evenly applied with a brush in the gaps, and the thickness should not be too large.

This process is then repeated until no air bubbles are formed on the surface. When the repair is completed, it is necessary to wait for a period of time to repair the broken handwashing station.

My wash-face counter fell off.

Hello, glad to answer for you. If the sink is broken, how can you repair it if the gap is not big, you can directly use white cement to repair it and stick it directly to the gap. You can also use glass glue and apply it directly to the crevices to allow it to cure.

You can also use ceramic metal repair agent where the gap is very prominent, you can directly use glass glue to repair, the hail chain gently apply it to the gap, let it dry, and after it is fully cured, use a knife to remove the excess glue marks. However, the use of glass glue to repair the shop will affect the washing of hands, the glue should be mixed according to the relevant proportion, and then evenly applied with a brush in the gap, and the thickness should not be too large. This process is then repeated until no air bubbles are formed on the surface.

When the repair is done, it will take a while, the simple way is to repair it with glass glue, but this repair method is relatively rough, and the family is not very concerned about the appearance of the basin, or it is a dry basin in a public place.

The easiest way is to use a ceramic metal repair agent to complete the repair. Hand Tank Oak.

1. Egg white lime paste sticky enamel utensils can be mixed with egg white and quicklime powder to form a paste, coated on the porcelain part, and can be used after drying.

2. Comfrey hot repair enamel ware The enamel ware touches off the porcelain, you can ignite the comfrey mushroom, and drop the burning letter juice on the porcelain. Each supplement can last for about half a year. Or use lithop powder and varnish to mix into a paste to supplement enamel products, which are also firm and durable.

3. Plastic rod riveting enamel ware For enamel ware with leaky holes, you can first expand the leakage into a hole the size of a mung bean grain, and then cut a plastic rod about 2 cm long and as thick as the leakage hole from the waste cooking bottle.

4. Repair the enamel utensils with the handle of the old toothbrush First use fine sandpaper to remove the rust on the porcelain of the enamel utensils, then put it on the stove to heat, use the old plastic toothbrush handle to smear on the loopholes, and cool it firmly.

2.Check the cause of the basin falling off, if the screws are loose or damaged, the screws need to be replaced or tightened.

3.If the pelvic floor is damaged, the pelvic floor needs to be replaced or repaired. Cement or glue can be used for repair, but wait enough for it to dry.

4.If the pot is due to a pipe problem, the pipe needs to be checked for blockage or damage, and if so, it needs to be repaired or replaced.

5.Once the repair is complete, reinstall the basin, make sure the screws are tightened and the pipes are connected correctly, then turn on the water source for testing.

6.If the question persists, you need to seek the help of a professional to fix it.

If the basin under the vanity counter falls off, it can be repaired by following these steps:

1.Turn off the water source: Before making repairs, you need to turn off the water source to avoid unnecessary trouble.

2.Disassemble the bottom of the basin: Remove the bottom of the basin under the basin counter and check whether the fixing screws on the bottom of the basin are loose or damaged.

3.Replace the screws: If the screws are found to be loose or damaged, they need to be replaced with new ones. Choose the right screw for replacement, and pay attention to the length and diameter of the screw to be the same as the original.

4.Secure the bottom of the basin: Once the new screws are installed, reattach the bottom of the basin under the basin.

5.Check the water flow: Re-open the water source, check whether the water flow is normal, and if there is any abnormality, it needs to be dealt with in time.

6.Cleaning: After the repair is completed, it is necessary to clean the wash basin and the area around the Zhou Sui Confession Bridge to maintain hygiene.

Notes:1Before carrying out repairs, it is necessary to understand the structure and use of the wash basin to avoid unnecessary damage.

2.When removing and installing the screws, it is necessary to use suitable tools to avoid damage to the screws and the wash basin.

3.During the repair process, it is necessary to pay attention to safety and avoid accidents.