Detailed tutorial of the driving school subject 2 test, and the process of the driver s license subj

The items included in Module 2 are:

1. Pile test: correctly judge the position of the driving space of the body, and control the vehicle to complete the reversing or advance through the space limit obstacle at low speed. Hundred.

2. Reversing and warehousing: correctly judge the reversing trajectory of the vehicle and control the vehicle to complete the reversing and warehousing.

3. Ramp fixed-point parking and starting: accurately judge the parking position; The accelerator pedal, parking brake and clutch are used in harmony for a smooth start.

4. Side parking: Manipulating the vehicle to park correctly into the parking space (garage) on the right side of the road during the movement.

5. Curve driving: manipulating the steering device in motion, controlling the vehicle curve driving 6, right-angle turning question: correctly manipulating the steering device in motion, accurately judging the difference between the inner and outer wheels, subject two, also known as the small road test, is part of the motor vehicle driving license assessment, is the abbreviation of the field driving skills test subject, the car C1C2 test items include reversing into the garage, side parking, ramp fixed-point parking and starting, right-angle turning, curve driving (commonly known as S bend) five compulsory tests (in some areas there is a sixth high-speed card).

The driving school organizes or individuals to go to the local "Motor Vehicle Driver Test Center" to receive personal test files, enter the waiting room in order, hand in personal files in order of entry, and look at the electronic display screen in the waiting room, and the candidate's name, ID number, car number, and test area will come out on the display screen.

According to the displayed car number and area, find the car you used for the test, if there is someone in the car for the test, please wait, if there is no one, follow the requirements of the examiner to get on the bus.

Don't be in a hurry to take the test after getting in the car, adjust the seat, fasten the seat belt, and adjust the reflector (some candidates don't know how to adjust the reflector, press the adjustment button to the lowest test, and move in the direction of the front of the car). As required, enter your fingerprint (the fingerprint input is generally on the passenger seat or on the right side), and when the voice prompts you to start the test, drop the manual brake and start the test.

During the test, the test will be carried out in the order of reverse pile storage, side parking, right-angle turning, curve driving, half-slope parking and starting.

This requirement means that at the beginning of each item, there will be a voice prompt in the car, such as when the voice "Please reverse into the garage" rings in the car, it means that the official test will begin. When moving from one item to the next, parking is allowed until the next item voice prompt begins.

During the test, if a certain step is not in place and points are deducted, there will be a voice prompt, if you are qualified, there will be no sound, and you can directly proceed to the next item.

After stopping and starting at the ramp after the test, there will be a voice prompt in the car, if you pass the test, it will prompt "pass the test, please go to the test center to print the results", if you fail the test, "fail the test".

Step to read. 10. If you don't qualify, go straight back to the starting point and take the second exam, each with two chances. If you pass, get off the bus, go to the test center to confirm your results, sign it, and at this point, you can go.

Reversing into the garage, starting from a half-slope, parking on the side, S-shaped pavement, right-angle turning.

The steps of the Subject 2 exam are as follows:

1. Preparation for the exam.

Before the exam, students need to prepare relevant documents, especially the original ID card, without the ID card can not enter the examination room for the test, can not take mobile phones, backpacks, cigarettes, lighters, can not wear slippers, high heels.

2. Waiting for the examination. After entering the examination room, hand over the original ID card to the instructor, wait in the waiting hall, shout your name to line up outside, conduct iris verification, divide the test car, and then wait in the waiting area, and find your vehicle when you hear your name called.

3. Get on the bus and prepare.

After the commander verifies the ID card information, after getting into the car, first adjust the seat, wear a seat belt, observe the dashboard, brakes, gears, lightly step on the brakes and clutch to find a feeling, these preparations are very necessary, not in advance after the observation has an impact on the follow-up test, especially the brakes and clutch, different vehicle clutches and brakes are not the same, unfamiliar in advance, a little bad operation is easy to stall.

4. Subjects 2 or 5.

There are 2 chances for the exam on the day, students are required to pass all five items, with a full score of 100 points, 80 points to pass, after the voice prompt score is unqualified, the student needs to return to the starting point and retake the second exam, if the two times on the same day are not qualified, it needs to be separated by 10 days before the subject two can be booked for the exam, and there are a total of 5 computer-based test opportunities (there are 2 exam opportunities on the same day).

5. Signature of transcripts.

After the end of the test, you should leave the examination room quickly, and should not hinder other students from taking the test, after the voice prompt results are qualified, you need to go to the transcript signing place and sign on your own transcript.

The detailed course 2 tutorial is as follows:

1. Close the door: Close the door after getting in the car, and pay attention to whether the door light is off.

2. Adjust the seat: press the clutch to the end with the left foot, hold the steering wheel with the right hand, adjust the seat with the left hand, adjust the left foot to bend hard, and then lock the seat. The angle of the backrest can be 90 degrees, and if the seat of the test car is too low, you can prepare the seat cushion.

3. Adjust the rearview mirror: the left rearview mirror puts the horizontal line in the center line of the rearview mirror, and the edge of the body accounts for 1 4 of the mirror image. The right rearview hall mirror places the horizontal line in the 2 3 position of the rearview mirror, and then allows the edge of the body to occupy 1 4 of the mirror image.

4. Fasten your seat belt: After fastening the seat belt, try again whether the clutch can be stepped on to the end, and step on the brake and accelerator with your right foot to slam the brake and accelerator, and it will not reach your foot.

5. Start the vehicle: The manual transmission car needs to put down the handbrake, step on the clutch, hook into the gear, slowly release the clutch, and lightly press the accelerator, so that you can drive. The automatic transmission car needs to put down the handbrake, keep the brake in the state of stepping on, pull the gear from the stop position [P] to the forward gear [D], release the brake, and gently press the accelerator pedal on the right side, and the vehicle can move forward.

Subject 2 is the most difficult subject in the driving test, and it is difficult for some friends who have never touched a car. I hope that the introductory skills of subject 2 that I will share with you today can be helpful for your next training.

<>2.Random lottery: Candidates will decide their own exam path and exam order according to the random lottery, and also learn about the exam situation of other candidates.

3.Test session: Candidates enter the test vehicle and follow the examiner's instructions for test operation, including adjusting seats, mirrors, seat belts, etc., to ensure that they and the vehicle are in the best condition.

4.Reversing and warehousing: Candidates enter the reversing and warehousing link according to the requirements of the test route, and need to complete the reversing and warehousing operation within the specified time.

5.Right-angle turning and curve driving: Candidates should perform right-angle turning and curve driving in accordance with the requirements of the test route, and need to pay attention to vehicle speed, lane selection, direction control, etc.

6.Emergency stop: In the process of driving, candidates need to take emergency braking measures immediately in case of emergencies, as well as adjust the direction flexibly and conveniently, and complete the parking operation within the specified time.

7.Slope start and Qumu sock tung line driving: Candidates need to start and drive on the road surface with a smooth and stable slope, and at the same time carry out curve driving and other operations.

8.Complete the exam: Candidates should complete all the test items within the specified time and according to the requirements of the exam route, and successfully pass the subject 2 exam.

It should be noted that during the test, candidates need to strictly follow the traffic rules and safety precautions, and always remain calm, composed, and unhurried. Only by being fully prepared and operating in strict accordance with the requirements of the examination room can you successfully pass the subject 2 exam.

The steps of the second exam are as follows:

Exam Preparation:

1. My ID card and admission ticket, after the driving school organizes the test room, according to the appointment of the test session, go to the waiting hall 30 minutes in advance to swipe the ID card to receive the sign-in number.

2. Wait in the test hall, please pay attention to the hall broadcast number and pay attention to the information displayed on the hall screen, call your name, and wait for the examiner to call you to the corresponding test lane according to the instructions.

Preparation for getting into the car: 1. Fasten your seat belt, first adjust the seat to the usual position of the car, and then adjust the rearview mirror to make it easier for you to see the point.

2. After confirming with the examiner that you can start the test, you can start according to the voice prompts.

3. Under normal circumstances, the coach car is not turned off, at this time step on the clutch, step on the brake, release the handbrake, hang a gear, and then slowly lift the clutch until the body is shaking and envious, release the brake and slowly drive to the test area. If the coach has turned off, then press the clutch, brake, and neutral ignition before proceeding with the above steps.

Exams officially begin:

1. The car drives to the right reverse warehouse stop line position, the shoulder coincides with the stop line and stops the park, and hangs the reverse gear to start the reverse warehouse. After the car enters the garage, the body must be straightened, do not turn left and right, and stop at the point.

2. Hang a gear out of the warehouse, drive to the left inverted warehouse control line, and stop after the same shoulder coincides with the control line. Hang the reverse gear to start the left reverse, stop after entering the warehouse, and finally go forward and drive out of the warehouse.

3. In the whole process, it is not allowed to stop, slip, turn off the engine, or press the line.

Side Parking:

1. When entering the side parking test area, take the raised part of the wiper point as a reference, so that it drives along the road sideline, and the latter keeps a distance of 30 cm between the body and the storage side line through the rearview mirror.

2. Stop when the shoulder coincides with the side parking control line, step on the clutch, step on the brake, and hang the reverse gear to start the side car parking.

3. In the process of side parking, it should be poured into the warehouse at one time, and it is not allowed to stop, slip, turn off the engine, or press the line halfway.