-
Anonymous users2024-02-121) First of all, check whether the surface of the vitrified brick has been waxed, if not, it must be waxed again before construction.
2) During construction, the construction workers must be required to wrap the rubber hammer in a white cloth before using it. Because of the poor antifouling performance of vitrified bricks, the brick skin is easy to be hammered and left black marks on the brick surface.
3) If it is a freshly paved floor tile, you should not walk on it, because the brick is not dry and solid, this is to avoid causing unevenness of the brick surface.
4) The newly paved floor tiles must also be covered with the tiled bricks in the packing box, which is to prevent the sand from grinding the surface of the bricks, and the paint or glue used in the decoration drips on the top of the bricks, causing pollution of the brick surface.
5) Only after the completion of the whole decoration can you do a thorough cleaning, so that the usual maintenance will be easier.
-
Anonymous users2024-02-11Before paving, the texture is good-looking, no.
-
Anonymous users2024-02-10The direction of the paving tiles should be based on the direction of the window, the shape of the space, and the main direction to choose.
1. The direction of the window.
According to the direction of the window, lay along the light, because it is easier to see the vertical extension by laying along the light; If you lay it horizontally, it is easier to see that the floor looks like a wave, and it will feel a little twisted visually.
2. Spatial shape.
According to the shape of the space, along the long side, the long corridor should be paved along the long side, because if a certain piece of floor is arched, it will not trip people horizontally in the middle of the corridor, and the rectangular living room should be laid along the long side, which is also to make the space have a sense of extension.
3. There is a main direction.
If there is a main direction, it will be paved according to the main direction; If the living room is paved with flooring, the laying direction is determined according to the above two principles, and the other rooms are also paved in the same direction as the living room. If the living room is not paved, then the direction of the dining room shall prevail, and the other rooms will also follow the same direction.
Precautions for paving tiles:
1. The stone used in the indoor ground is generally a polished plate, with a thickness of about 20 mm, and there are also thin plates with a thickness of about 10 mm, which is suitable for home decoration. Each piece size is 300 mm, 300 mm, 500 mm, 500 mm. Sheet and 1:
2. Cement mortar mixed with 107 glue paving.
2. Cleaning and finishing the ground of the base Chaozhou - cement mortar leveling - calibration height, elastic line - material selection - plate soaking and wetting - installation of standard blocks - paving cement mortar - paving stone - joint filling - cleaning - maintenance and delivery.
3. The base treatment should be clean, the uneven places should be chiseled and repaired first, and the base should be clean, and there should be no mortar, especially white ash mortar ash, oil stains, etc., and wet the ground with water. When paving stone and porcelain tiles, the standard block must be placed, and the standard block should be placed at the intersection of the cross line and installed diagonally.
4. During the paving operation, each line should be hung in turn, and the stone must be soaked in water and moistened, and the back should be wiped clean after drying. The maintenance of stone and porcelain tile floor paving is very important, and it must be sprinkled with water after installation 24 years ago, and covered with sawdust after the towel is paved.
5. Before paving, try to spell the plate, match the flowers, colors, and numbers, so that the ground color is consistent. The stone must be soaked in water and dried. In order not to affect its coagulation and hardening, hollowing, shelling and other problems, after the completion of the paving, 2 3 days shall not be on the person. <>
There is little difference with the wall installation, 1. Look at the seam 2, the flatness, the four corners of the block do not block the hand, 3. The hollow drum floor tiles are not allowed to have hollow drums, 4. Whether the surface texture meets the design requirements.
Floor tile purchase tips:
1. Anti-slip test: Floor tiles generally include glazed tiles, full-body tiles and all-body polished tiles, which all have one thing in common, that is, they are not anti-slip. Although beautiful, simple and generous, it is not particularly suitable for owners and friends who have elderly and children at home to decorate and buy, it is recommended to do an anti-slip test when purchasing, just in case. >>>More
Cornice: The coil that is paved to the end of the cornice is cut and pressed into the groove, and then the groove is filled with sealing material. When fixed with a bead, the nail should be embedded in the groove, and the nail cap and the end of the coil should be sealed with sealing material. >>>More
Take a look at the flatness of the wall According to the regulations, the flatness and verticality of the wall surface are within 2 meters, and the error is not allowed to exceed 4 mm. Otherwise, it will affect the flatness of the tile paving. >>>More
A few days ago, I went to the community and found that my neighbor's house was being renovated, and I wanted to go in and have a look, and found that my neighbor's house was all tiled. I thought that my neighbor had really spent a lot of money to renovate the house, but after talking to the neighbor, I realized that it was a project given by the decoration company. >>>More