How to wash the black tiles in the room, how to clean the yellow and black tiles in the bathroom

Mix hydrochloric acid or phosphoric acid solution with water in a ratio of 1:5, spray the mixed water on it (you can also bring rubber gloves and wipe with a rag dipped in water), and wipe it several times.

Cleaning and maintenance of ceramic tiles:

1. The ordinary dust on the surface of the tile can be cleaned with dish soap, soap, laundry detergent, etc.

2. The wax layer of polished bricks when leaving the factory can be removed with decontamination king.

3. The cement scale, caulk and other dirt remaining on the surface of the tile can be removed with the descaling king.

4. Paints, coatings and other pollutants are dissolved and removed by chemical solvents, such as Tianna water.

5. Black metal scratches, welding marks, etc. can be removed with descaling king.

It depends on how far it burns.

You should only burn this until the surface is blackened, generally speaking, detergent, laundry detergent, toothpaste can be treated, and it is also said that white vinegar or hydrogen peroxide can also be used. Just wipe and scrub with a sponge or a soft-bristled brush (a discarded toothbrush is fine). But don't use steel wool.

These are hard. Will scratch.

It will be more difficult to deal with in the future, if you polish the tile or antique brick after cleaning, remember to polish it with floor wax.

If it has been burned deeply, the wear-resistant layer or crystal glaze on the surface of the tile has been burned out or even carbonized (which should be impossible to achieve in the daily life of the general family), and the kind of can't be washed off and buy a new one to replace it.

In the gap of the tile, first squeeze the toothpaste into the container, add beer, add starch, then dip the solution with a paper towel and stick it on it, then let it stand for five minutes, then remove it and wipe it, and disappear in minutes, no need to wipe or wash, I hope this life trick can help you.

Bathroom tiles are yellow and blackIt can be cleaned with tile cleaner, and mixed with baking soda + white vinegar + salt + dish soap. Both of them are more effective methods, and they are effective in personal testing

Tile cleaner cleaning

The tiles in the bathroom at home will always leave some stains in the process of using, and they are easy to turn yellow and dull or even black after a long time. Those of us who are regular hygienists know that such smudges are difficult to clean with a mop brush. If you use a stainless steel ball or other rough way to clean it, it will scratch the tile, and the scar will bring secondary damage (stain) after a long time, and it will make it more difficult for us to clean again.

In my experience, it is recommended to use a special tile cleaner for cleaning. As shown in the figure below, the way to use it is to spray the tiles of the bathroom, especially in the places where the stains are heavier, let it stand for about a minute, then brush it with a medium brush, and finally rinse it with water. The advantage of this method is that it is very time-saving and labor-saving, and the effect is also very good.

Baking soda + white vinegar + salt + dish soap

If you don't have tile cleaner at home and are in a hurry to clean up, you can use baking soda + white vinegar + salt + dish soap. These four items are all food items that are commonly prepared in the kitchen at home, and they are easy to access and convenient. Baking soda has a strong ability to remove stains, and white vinegar is acidic, which can react chemically with baking soda, and the resulting foam can effectively remove stains and remove flavor.

The effect of table salt is mainly to increase friction in the brushing process, and the dish soap also has a detergent, which can also clean the air in the bathroom.

The method of use is also relatively simple, after all the bathroom tiles are wet, then sprinkle baking soda + white vinegar + salt + dish soap in turn, and then apply evenly with a toilet brush, and let it stand for about a few minutes. The longer it takes, the better the effect This is the method I often use, because compared to the first method, this one tastes better, but it is more wasteful food.

Tips for bathroom tile maintenance

One is to keep the bathroom tiles dry. If the bathroom tiles are often damp, the tiles are easy to grow mold, and they are easy to turn yellow and black after a long time, so the first thing to pay attention to is to keep the tiles dry. My approach is to turn on the exhaust fan often to remove the moisture from the bathroom; I have a silent wall fan in the bathroom to help dry the moisture in the bathroom; Always have a silicone mop and scrape off a lot of water on the ground after taking a shower.

The second is regular scrubbing and cleaning. Use some laundry, dish soap, detergent, etc., before taking a bath, clean and brush the toilet, especially the tiles near the edge of the squatting position, even if you don't see obvious yellow and black stains, you need to clean them, because some are invisible to the naked eye, and when you see them, they are already very serious. Therefore, it is important to insist on keeping the bathroom tiles clean and tidy for an extended period of time.

The above are some ways to clean the yellow and black tiles in the bathroom, and how to keep the bathroom tiles dry and clean for a long time.

Bathroom tiles are yellow and black, and can be usedBleach and baking soda to clean

1. Wash with bleach

Bathroom tiles are yellow and black, which is a troublesome thing that plagues many families. But don't worryYou can use bleach to clean, the method is very simple, sprinkle bleach on the yellowed and blackened floor tiles, let the bleach decompose and destroy the bacteria on it after letting it stand for a while, probablyHalf an hourLet the bleach give full play to the effect, and finally rinse it off with water many times? That's it,My family often uses this method, and the effect is immediate.

Ordinary bleach on the market will do.

2. Clean with baking soda

Prepare a basin of water in advance and add an appropriate amount of baking soda to the water (It is better to have a higher concentrationThen use a brush to vigorously brush the yellowed and blackened parts of the floor tiles, which can quickly clean them, and the effect is also great.

I see a lot of families, when it comes to cleaning bathroom tiles,Just use the cleaning ball to brush the blackened parts of the tiles, which is wrong. Because not only the effect is poor, the efficiency is low, but also will damage the floor tiles and affect the appearance, which is very undesirable, so I do not recommend friends to do the same.

In fact, the reason why floor tiles turn yellow and black is not only due to the external damp environment, but also related to incorrect use and maintenance

Here is the focus on the daily maintenance and maintenance methods of ceramic tiles:

1. It is necessary to remove water rust

Because the bathroom environment is dark and damp, the surface and gaps of the tiles will produce rust, which is not only unsightly in appearance, but also causes the tiles to be smooth and prone to accidentsTherefore, the treatment of water rust is very important.

Method:Pour the detergent into the cracks of the floor tiles to be cleaned, rinse with clean water after brushing with a brush, and finally wipe off the water stains with a dry mop.

2. It is very important to prevent mildew and seepage

We all know that the bathroom is damp, and the corners of the floor tiles are easy to moldTherefore, the anti-mildew and anti-seepage work should be done in place.

Method:You can dip the brush in detergent, gently scrub the floor tiles, then rinse them off repeatedly with clean water, and finally brush with a layer of waterproofing agent, which can not only prevent leakage, but also inhibit mold growth, the best of both worlds.

This water repellent works great......

3. Anti-soap stain can not be ignored

A large part of the reason why the tiles in the bathroom are yellow and black is that when using soap, you accidentally get on the tiles and do not clean them in time, which will form a thick layer of soap dirt over time.

Well, for the cleaning method of bathroom tiles that are yellow and black, as well as the maintenance secrets, we will talk about it firstIf there is still something you don't understand, you can @ me at any time, and I will help again, thank you, friends

1. If the tiles in the bathroom are yellow and black, we can use bleach to clean, only need to sprinkle the bleach on the yellowed and moldy wall, let the bleach decompose and destroy the bacteria on it after standing for a period of time, and let the bleach give full play to the effect after about 30 minutes, and then rinse it with clean water, you will find that the black and yellow parts have been cleaned.

2. You can also use baking soda to remove the yellowing and blackening parts of the bathroom tiles, prepare a basin of water, add an appropriate amount of baking soda to it, and then use a brush to brush the yellowing and blackening parts such as the floor and the wall, so that it can be cleaned well, which is very effective.

1. The use of acidic cleaners can remove the yellowing substances of tiles, including cement stains, scale, stubborn urine stains and oxidized metal stains that are common in the bathroom, such as acidified cleaners. Alkaline cleaners can remove all kinds of animal and vegetable greasy stains and mechanical oil stains, and can remove the wax layer from the floor.

2. The tiles in the bathroom are often stained by rust, soap dirt and other stains, resulting in yellowing and blackening, in order to keep the porcelain surface clean and not damage the bright porcelain surface, you can use multi-functional stain remover to clean.

3. You can also use sulfuric acid or hydrochloric acid solution, drop it on the brick surface and let it stand for a few minutes to wipe, if it is not very serious, you can wipe it several times with vinegar.

Summary. The tiles are blackened by the fire, most of them can be wiped directly with a rag, and if they are not easy to clean, they can be cleaned with a special kitchen cleaner.

The tiles are blackened by the fire, most of them can be wiped directly with a rag, and if they are not easy to clean, they can be cleaned with a special kitchen cleaner.

Scrubbing with hot, soapy water can usually be removed.

Or you can use 84 bleach solution, the method is also wiping, and the effect is very good.

Soap with a little ammonia and turpentine mixed to clean the tiles can make the tiles more shiny. Polished tiles should be waxed regularly such as clusters, and the time interval is 2 to 3 months.

It can also be cleaned with acetone.

It depends on the severity of the burn. If it only burns to a black surface, you can use a clean supermarket cleaner to clean it, do not scatter hard objects, otherwise it will scratch the wear layer or crystal glaze on the surface of the tile, and the stain will seep in. After cleaning polished or antique tiles, be sure to polish them with floor wax.

If it is burned deeper, the wear-resistant layer or crystal glaze on the surface of the tile has burned out, it cannot be washed and can only be purchased and replaced.

It depends on how much it is burned, if it is only burned until the surface is blackened, the detergent sold in the supermarket can basically be cleaned (remember not to brush with hard objects, otherwise the wear-resistant layer or crystal glaze on the surface of the tile will be stained, and the stain will penetrate deep into the tile, which is more difficult to clean). Remember to polish the tiles or antique tiles with floor wax after cleaning.

If it has been burned deeply, the wear-resistant layer or crystal glaze on the surface of the tile has burned out, it cannot be washed off, and you can only buy a piece to replace it.

To clean with alkaline noodles, you can put the alkaline noodles in a basin and put hot water to dissolve, and wipe the wall tiles with an appropriate amount of alkaline water in steel wool balls, so that the black substance on it can be wiped off, and then wiped clean with a clean rag.

If the tiles in your home are accidentally burned black, you can use a professional cleaner to clean them, so that the cleaned tiles will return to their original appearance.

1. We can use the baking soda we usually use to clean up. Tiles that have been blackened are actually very difficult to clean. We can try to use baking soda and dish soap to deal with it, and the above little toothpaste has a whitening effect, and after pouring water, you can stir these things to finish.

Prepare a brush and use the brush to dip a little water in the most prepared cleaner. Next, use a brush to gently brush the black gaps on the top of the tiles. After use, wipe it with a towel and it will be as bright as new.

This method is suitable for small blackened tiles.

2. The above is the first method, and the second method can take tile grout. The first thing to do for this gap is to choose one that is similar in color to the tile. That's what you need for a silicone gun.

The first step is to clean the tiles and then clean them with a brush. Wipe dry with a dry towel during the cleaning process. Because tiles are not allowed to have moisture.

This is followed by the filling of the tiles. Squeeze out the tile caulk as much as possible along the edge line. When squeezing, you should squeeze along the line, do not bend and bend, uneven up and down, you can also put on gloves first, and then slowly fill in the gaps.

In this way, the caulking is carried out in a straight line until the black patches of these gaps are gone, and the hairy gaps are smooth. Once all is filled, wait about 2 to 3 minutes to dig up the remaining scraps. After waiting for two hours, all the strain will condense.

At this time, we can see that the black gaps in the tiles are gone, replaced by new raw materials that have been filled. After filling, it is actually a wipe that does not affect the ground.

3. Note that there is no moisture in the process of processing. Because once water is added, the caulk that tends to make our caulking becomes less solidified because of the water dilution. At the same time, we will not affect the beauty of the tiles because of dust.

The tiles in the home should also be cleaned in time.

First, the cause of blackening is mainly due to moisture, mildew or sewage erosion. Second, treatment methods: 1. Clean with dish soap (note not to hurt the ceramic tile glaze), 2. If the effect is not good, scrape with a steel wool ball or knife, 3. Dry the treated parts with a dry soft cloth or paper, 4. Apply tile joint waterproof material at the joints (white liquid is transparent after drying) Third, daily maintenance, wipe the tiles frequently with a clean wet towel to keep them dry and clean.