The decoration of the house is better than floor heating, solid wood planks, or laminate flooring

When installing floor heating at home, it is good to use laminate flooring, and it is easy to cause deformation and other problems with solid wood flooring. Laminate flooring has the following advantages:

1) Parquet retains the natural texture of solid wood flooring and the characteristics of comfortable feet.

2) Solid wood parquet has the characteristics of laminate flooring, wear-resistant, easy to install and clean.

3) My parquet is very suitable for underfloor heating in home renovation.

4) The hardness of parquet is smaller than that of laminate flooring, which is very suitable for families with elderly people and children to decorate.

5) Parquet** is between parquet and parquet, which belongs to the medium consumption water balance and is within the acceptable consumption range of most families.

6) Parquet is easy to install, easy to clean and clean, and not as delicate as solid wood flooring.

7) The decoration effect of parquet is very good, and there are many varieties, such as: solid wood composite antique flooring, solid wood parquet flooring, etc.

From the above, we can see that laminate flooring is a good underfloor heating floor, which is very in line with the requirements of underfloor heating flooring, you may wish to consider it!

In the case of floor heating, laminate flooring should be laid, such as parquet is good, if the solid wood floor is laid, due to the reason of heat rise and contraction, the solid wood floor is easy to deform, and the solid wood parquet will not be like that.

There are advantages to each in two ways. Hardwood floors are prone to cracking when heated in winter. Shrink. Composite solid wood flooring is better to prevent cracking. The requirement is that it does not contain formaldehyde. and the material which is not good for the body. Or the latter.

Geothermal energy can only be selected.

Parquet and laminate flooring.

You can't use hardwood flooring...

Parquet flooring is more environmentally friendly than laminate flooring, and the reinforced one is cheaper than the solid wood composite one.

Laminate flooring is now chosen.

Parquet flooring is not suitable for underfloor heating. Solid wood flooring does not meet the requirements of geothermal heat in many aspects, solid wood flooring needs to hit the keel, producing a thick layer of air, and the wood itself is a poor conductor of heat. Moreover, the fiber structure of wood has the characteristics of moisture absorption, and it is easy to deform when absorbing water and losing water under the change of temperature and humidity.

During the heating period, the floor needs to withstand a certain amount of heat, when the moisture in the air is absorbed into the wood, the wood will expand, and when the air is relatively dry, the moisture of the wood will run into the air, making the wood dry and shrink. If you use ordinary solid wood flooring, it is easy to crack and shrink joints. This affects the life of the floor and is therefore not suitable for use as floor heating.

Floor heating must pay attention to check whether the installation of the pipes of your floor heating and all the water pipes buried under the floor is scientific, followed by choosing the right solid wood floor.

Floor heating wood flooring selection criteria.

1. The floor is dimensionally stable and can withstand temperature changes without damage.

2. No deformation, cracking, small thermal expansion and contraction coefficient.

3. Eco-friendly, no formaldehyde and harmful gas release.

4. Don't be afraid of soaking the floor with water (prevent the floor heating pipe from being damaged, the water from flowing out of the floor from being damaged).

Solid wood flooring vs. laminate flooring.

1. Generally speaking, laminate flooring is more suitable for underfloor heating. Because the standard thickness of the floor heating floor is, the thickness of the composite floor is mostly 6 9mm, of which the laminate floor is mostly 6 8mm, and the three-layer solid wood parquet is 8 9mm, the heat transfer performance is better, and there is a layer of aluminum oxide wear-resistant layer on its surface, which is conducive to the rapid diffusion of heat on the surface.

2. The general thickness of solid wood floor is about 2cm, and the keel should be played when installing, if it is used as a floor heating floor, there is air between the floor and the ground, and the thermal conductivity of air and wood is very low, so that the heat is not easy to be conducted to the surface, which will lead to the waste of heat, the surface temperature is uneven, the temperature difference is obvious, and the composite floor is pressed by high temperature, and the internal moisture content is very small, so the floor will not be deformed due to the loss of moisture. The multi-layer parquet is staggered horizontally and vertically between each layer, and there are dense anti-deformation grooves on the back, which decomposes the stress generated by the heating surface, so the amount of deformation is small.

There are two kinds of parquet, one is three-layer parquet, which was produced earlier and is composed of three layers of wood panels, core boards and back boards. The other type of multi-layer parquet consists of seven or nine layers and is more stable than a three-layer parquet floor. Especially in geothermal environments, multi-layer parquet is highly heat-resistant and not easy to deform.

Therefore, when purchasing, you should find out whether to buy three-layer or multi-layer parquet according to your own needs. Peace of mind flooring reminds you: if you choose a floor for geothermal heating, then you must choose a multi-layered one.

What should I pay attention to when using floor heating daily? When using floor heating, you must pay attention to the method of its use, otherwise it will cause unnecessary injury. Many users do not understand the correct use specifications of floor heating, which ultimately leads to the reduction of the life of floor heating and causes various inconveniences to daily use.

Individuals are not allowed to renovate the floor heating pipes privately. Because the heat load calculation (coil spacing, pipeline direction) is designed during the installation of floor heating, the floor heating is modified and the floor heating position is moved without permission, otherwise it is easy to have a local phenomenon of no heat. The problem of underfloor heating is not hot.

If the overall heating in the house is not hot, it may be that the pipe well outside the door is flooding and the return valve is not opened. The local heat of a single household may be caused by gas accumulation in the pipeline. Keep in mind that in the case of ensuring the circulating pressure and temperature of floor heating, the main reason for not heating is air blockage, which can be solved by degassing.

Room temperature setting. The initial heating should be carried out under the guidance of technical personnel, and it is strictly forbidden to put it into use without commissioning; The indoor temperature should be controlled at no less than 18 degrees during daily heating in winter, and the average indoor temperature should reach 16 degrees, but for the elderly and children, the standard of 16 degrees is relatively low, if the best comfort of using floor heating is 19-22 degrees, too high will make people feel uncomfortable, and if the temperature difference between outdoor and indoor is very large, it is easy to catch a cold. It is strictly forbidden to place a high-temperature heat source near the water vapor collection.

It is strictly forbidden to place a high-temperature heat source near the divider and water collector and on the ground where the floor heating pipe is laid to prevent affecting the temperature control of the pipeline system, which is the best protection for floor heating.

Home décor. I've been doing it for more than twenty years. Laminate flooring. My advice. It's still OK.

Hello, I'm glad to answer your question, if there is underfloor heating, it is best to lay laminate flooring, solid wood flooring can not be used for underfloor heating. If you want to lay flooring, you can choose solid wood or laminate flooring for underfloor heating. Because the internal moisture of the solid wood floor will be lost when it is heated, causing the floor to crack and deform.

Whereas, parquet is made of multiple layers of wood planers bonded together for underfloor heating without cracking and deformation.

Secondly, if the solid wood floor is not laid with keel, there is no difference between the foot feeling and the directly laid solid wood parquet and laminate floor, but the floor heating cannot be keeled.

It is better to have floor heating and solid wood flooring or composite.

Hello, I'm glad to answer your question, if there is underfloor heating, it is best to lay laminate flooring, solid wood flooring can not be used for underfloor heating. If you want to lay flooring, you can choose solid wood or laminate flooring for underfloor heating. Because the internal moisture of the solid wood floor will be lost when it is heated, causing the floor to crack and deform.

Whereas, parquet is made of multiple layers of wood planers bonded together for underfloor heating without cracking and deformation.

Secondly, if the solid wood floor is not laid with keel, there is no difference between the foot feeling and the directly laid solid wood parquet and laminate floor, but the floor heating cannot be keeled.

Is it better to use hardwood or laminate flooring for underfloor heating? Let's compare from the following aspects.

1. Deformation.

Under the same environmental conditions, the deformation of solid wood flooring is greater than that of laminate flooring, and the deformation of composite flooring is greater than that of multi-layer solid wood flooring. The reason for the small deformation of multi-layer parquet used for geothermal heating is that its substrate is staggered horizontally and vertically between each layer, and each other is contained; There are also dense anti-deformation grooves on the back, which dissolve the stresses generated by the heating surface, so it has less deformation. The deformation of the wooden floor from large to small is as follows:

Hardwood flooring》Laminate flooring》Parquet.

2. Installation.

Parquet is easy to install, and generally does not need to play keel, but only requires ground leveling. When the solid wood floor is paved, it is necessary to hit the wooden keel.

3. Heat transfer.

The thermal conductivity of the floor is related to the thickness of the floor, and the thickness of multi-layer parquet is about the same as that of laminate flooring, however, the anti-deformation groove on its back is conducive to air circulation, reduces noise, and the thermal conductivity is better than that of laminate flooring. The thermal conductivity of wood flooring materials is arranged in order from large to small: parquet "laminate flooring" solid wood flooring.

4. Practicability.

Hardwood parquet has the advantages of beautiful and natural solid wood flooring, comfortable foot feeling and good thermal insulation performance; It also overcomes the shortcomings of solid wood flooring due to the shrinkage of the monomer and easy to warp cracks.

5. Moisture resistance and waterproofness.

In winter, when the interior is dry, it will generally become humidified, and the moisture and water resistance of the floor is equally important. The parquet is specially treated, and the sample is soaked in water for 3-5 days without obvious deformation; Even if a large amount of water runs on the ground after installation, and the arch is soaked, as long as the doors and windows are opened and the air circulation is maintained, it will soon be restored to its original state, which solves the customer's worries that the customer cannot recover after laying other floors when encountering water. In terms of moisture resistance and water resistance, parquet is significantly superior to other categories.

6. Durability aspect.

The appearance of the solid wood floor is better, the foot feel is good, the texture and color are natural, but the hardness is slightly worse. High laminate flooring has high hardness and good wear resistance, but the foot feel is slightly worse.

7. ** aspects.

The color of the solid wood floor varies greatly, and the ** is relatively high. Laminate flooring is easy to pave, convenient and low.

Summary. Can floor heating be paved with laminate flooring? Hello, happy to answer your <>.

Pro-floor heating can be paved with composite wood flooring, and composite wood flooring must be used, because the thermal conductivity of solid wood is poor, affected by heat, it is easy to deform the problem, the actual construction should pay attention to, the choice of geothermal floor must be judged according to the characteristics of the heating path, to be able to adapt to repeated changes in heat and cold and facilitate heat conduction, the deformation of the floor is small, but also convenient for heat conduction, and can be waterproof and moisture-proof. Hope mine can help you <>

Do you have any other questions?

Can underfloor heating be laid with laminate flooring.

Can floor heating be paved with laminate flooring? Hello, happy to answer your <>. Pro-floor heating can be paved with composite wood flooring, and composite wood flooring must be used, because the thermal conductivity of solid wood is poor, affected by heat, it is easy to deform the problem, the actual construction should pay attention to, the choice of geothermal floor must be judged according to the characteristics of the heating path, to be able to adapt to repeated changes in heat and cold and facilitate heat conduction, the deformation of the floor is small, but also convenient for heat conduction, and can be waterproof and moisture-proof.

Hope mine can help you <>

Do you have any other questions?

Will the use of laminate flooring for underfloor heating increase formaldehyde emissions?

Yes, dear. There is no impact on health, affecting health.

Yes, dear. That's still not suitable for wooden flooring, is it?

After laying the wooden floor on the pro-floor heating, the floor heating is not produced by formaldehyde. However, after the use of floor heating in the later stage, the wooden floor will be heated, and when the temperature of the wooden floor reaches 15 degrees, it will accelerate the release of formaldehyde from the wooden floor.

That's what I mean, which means that wooden floors are not suitable for underfloor heating.

Yes, dear. After consulting for a long time, the floor heating is not suitable for wooden floors!

Pro-composite flooring is more suitable for geothermal flooring.