Why is it still damp on the floors of the upper floors? Why?

Many owners will choose high-rise residences when buying residences, but some owners find that even if they live in high-rise residences, there will be indoor dampness problems, so why do high-rise homes still be damp?

1. Why is it still humid when you live in a high-rise building?

, caused by high water vapor content in the air

During the rainy season or when the wind blows southerly, the air humidity is high, and the moisture in the air condenses into water droplets on the walls and floors, resulting in a very humid room.

, caused by leakage of water pipes

If the house is not renovated well, the water pipe joint will leak, or the water pipe will be drilled by an electric drill, etc., which will cause the water pipe to leak. Water pipes are usually buried in the wall floor, and the pipes have water seepage, which will make the wall and floor very wet over time.

3. Other reasons.

If the waterproofing of the upstairs is not done well, or if there is a leak in the upstairs water pipe, or if the exterior wall is not waterproofed properly, etc., it will cause the interior to be very damp and so on.

Second, how to do a good job of moisture-proof

1. In order to avoid indoor dampness, we should take moisture-proof measures when decorating the house, for example, when we decorate the wall, we can first paint the alkali-resistant and moisture-proof sealing primer, and then decorate the wall. When decorating the ground, you can lay moisture-proof mats, etc., to try to avoid indoor dampness caused by moisture on the wall and ground. In addition, we should decorate in accordance with the construction requirements when decorating, and do a good job of relevant acceptance work to reduce indoor humidity caused by leakage of our own water pipes.

2. On southerly days or during the rainy season, it is best to close the indoor doors and windows to minimize outdoor moisture entering the room. You can also put activated carbon bags, tea, dehumidification boxes and other products indoors to absorb excess moisture in the room, the adsorption capacity of dehumidification products is limited, and we should replace them frequently. If the air conditioner has a dehumidification function, we can also turn on the air conditioner dehumidification function to dehumidify and so on.

Disclaimer: This article is for the purpose of conveying more information. Do not bear any legal responsibility, if there is any infringement, please contact us, we will delete it as soon as possible.

It could be because you're mopping the floor with a mop, or it's leaking, or the floor isn't very moisture-proof.

This condition is caused by excessive humidity, and the dehumidification function of the air conditioner can be used to expel the moisture in the room.

This situation is caused by excessive humidity in the air, which can be solved by opening windows for ventilation.

Because 1Humid environment will cause the floor to absorb moisture and produce tidal swelling, for example, the cement is not dry, and the ground keel is sealed with cement to absorb the ground keel.

2.During construction, there was no expansion joint left or right centimeter left on the horizontal floor of the room.

3.The wood is produced immediately after drying, and the material has no life period.

4.The material of this flooring is not suitable for use as a flooring material.

5.The floor near the junction of the kitchen and bathroom and the junction are not closed to keep the moisture.

It's very likely that it has encountered water. So there will be a tidal wave.

Obviously, your ground waterproofing is definitely not done well!

The weather is getting warmer in spring, and many southern friends have entered the distress of the resurgence of the tide, and they always feel that every corner of the house is very humid, and the whole person is not good, which has to be said to affect the mood of the weekend. What should I do if there is water on the ground in the spring resurgence?

Dry mop mopping.

It is recommended to use a dry mop or dry towel to mop the indoor floor dry, do not use a wet mop to mop the floor directly, try to wring out the mop without dripping before mopping. Or you can mop the floor at noon and open the window for ventilation.

Mop the floor with warm salt water.

Pour an appropriate amount of salt into the mopping water and mix it evenly, then put the mop into it to soak it and wring it out on the mopping floor, the warm salt water mopping the floor evaporates faster, which can make the floor dry into small particles, so that the ground can also prolong the drying time.

The floor is covered with a water mist.

Under normal circumstances, re-damp weather is inevitable, but we can reduce the phenomenon of overly wet floors through some life tips, such as laying absorbent mats, dry rags or sawdust on wet floors, etc., which can help absorb water and remove moisture, and can also prevent slipping and falling.

Dehumidification of electrical appliances. In order to avoid too much humidity at home on the day of resurgence, you may wish to turn on the air conditioner or use a dehumidifier from time to time, which is very helpful to improve the indoor humidity, which also has a certain effect on the indoor furniture and the electric moisture-proof of the home spring outing.

Buy a dehumidifier.

In the spring rainy weather, you can place a dehumidification box at home, or put desiccant and dehumidifier in a damp corner, and put moisture-absorbing products on the seriously damp parts, which will help adsorb water vapor and prevent serious dampness.

Moisture relapse on high-rise floors is a common problem, which can lead to rotting, deformation, cracking and other conditions on the surface of the floor. To solve this problem, the following steps are required:

1.Clean the ground: Start by cleaning up the dirt and residue from the ground so you can get a better view of the ground.

2.Locate the problem: After clearing the ground, you need to find the location of the infiltrated water and confirm the extent and depth of the problem.

3.Replace the material: If the problem is more serious, you need to replace the material. It is necessary to completely replace the damaged flooring material and replace all the components of the floor system such as wood, insulation, and evaporators on the ground.

4.Enhance the density of the ground: It can also prevent moisture relapse by increasing the density of the ground, laying a layer of waterproof membrane on the ground, setting up a drainage system, and painting waterproof materials on the concrete layer.

5.Enhanced ventilation: Increasing indoor ventilation to allow air to circulate indoors can help reduce humidity and slow down moisture returns.

For the treatment of moisture return on the floor of high-rise buildings, it needs to be carried out according to the situation and degree of the problem, and the lack of cry treatment can be carried out according to the above steps, so as to enhance the moisture resistance of the ground and protect the health of the floor.