How to carry out forced cleaning of Zhuoli garment steamer

Mandatory cleaning means cleaning when the machine itself does not indicate that it needs to be cleaned. Before turning on the forced cleaning function, first make sure that there is enough water in the tank. Then use the handle to set the gear to the lowest setting, then press and hold the " button on the handle for more than three seconds, and wait for the cleaning symbol on the screen to turn black, indicating that the forced cleaning function is enabled.

After 2-3 minutes, the descaling function of the machine will automatically end, and after the end, the state of the machine when it was just turned on will be restored, and the temperature on the screen will gradually rise, which indicates that the cleaning function has ended. After the cleaning function is over, you can clearly see that there are a large amount of water droplets in the cleaning box of the ironing head, and after removing the cleaning box, you can clearly see that there will be a large amount of waste water and scale in the cleaning box, and then you only need to pour out the waste water in the cleaning box. This is.

How to carry out forced cleaning of Zhuoli garment steamerMandatory cleaning means cleaning when the machine itself does not indicate that it needs to be cleaned. Before turning on the forced cleaning function, first make sure that there is enough water in the tank.

Then use the handle to set the gear to the lowest setting, then press and hold the " button on the handle for more than three seconds, and wait for the cleaning symbol on the screen to turn black, indicating that the forced cleaning function is enabled. After 2-3 minutes, the descaling function of the machine will automatically end, and after the end, the state of the machine when it was just turned on will be restored, and the temperature on the screen will gradually rise, which indicates that the cleaning function has ended. After the cleaning function is over, you can clearly see that there are a large amount of water droplets in the cleaning box of the ironing head, and after removing the cleaning box, you can clearly see that there will be a large amount of waste water and scale in the cleaning box, and then you only need to pour out the waste water in the cleaning box.

The cleaning of Zhuoli garment steamer is fully automatic and intelligent. It has an automatic cleaning function, when the garment steamer needs to be cleaned, the cleaning area on the display will become a shadow, then you just need to put the ironing head cleaning box on the ironing head, hang the ironing head on the hanger, and hang it up. Wait for about 8 minutes, then take it down and pour out the dirty water.

1. Add special descaler and water to the water tank first, and the proportion needs to be controlled, usually according to the ratio of 1:10, in order to play a better cleaning effect. And fill the tank to the brim and cover it well to prevent the water from pouring out.

2. Then put the water tank on top of the garment ironer, plug in the power supply, turn on the switch button on it, and let the garment steamer run for about half an hour.

3. After the garment steamer runs for half an hour, turn off the power, unplug it, and remove all the dirty water in the water tank. At this time, you will find that the inside of the water tank and the entire garment steamer is very dry and clean.

4. Finally, pour an appropriate amount of water into the garment steamer, lift it by hand, and swing it from side to side a few times. And repeat this several times until the inside is clean.

Summary. Hello dear, glad to answer your <>

The cleaning procedure of Zhuoli garment steamer is as follows: 1First, confirm that the garment steamer has cooled down completely.

Disconnect the power and pour the water out of the tank. 2.Remove the hose and cover and clean the filter.

Rinse the filter with clean water. 3.Rinse the tank with clean water and use a soft-bristled brush to clean the pump at the bottom of the tank.

4.Clean the base of the iron with a soft-bristled brush and rinse with clean water. 5.

Check that the steam pipes are not blocked. If there is a blockage, you can use a fine cigarette case brush to clean it. 6.

Use an acidic detergent to wash the iron. Once the detergent is diluted, pour it into the iron tank and follow the instructions on the instructions. 7.

After soaking for a few minutes, start the garment steamer for steam jet to completely drain the detergent. Then, rinse the iron with clean water to ensure that the detergent is completely removed. 8.

After cleaning, put the tank back in and install the cigarette case, cover and hose back. 9.Turn on the power, preheat the garment steamer and perform relevant tests to ensure that the cleaning is thorough and effective.

How to perform the cleaning procedure of the garment steamer.

Hello dear, glad to answer your <>

The cleaning procedure of Zhuoli garment steamer is as follows: 1First of all, make sure that the garment steamer has cooled down completely.

Disconnect the power and pour the water out of the tank. 2.Remove the hose and cover and clean the filter.

Rinse the filter with clean water. 3.Rinse the water tank with clean water and use a soft bristle brush to clean the water pump at the bottom of the tank.

4.Clean the base of the iron with a soft-bristled brush and rinse with clean water. 5.

Check that the steam pipes are not blocked. If there is a blockage, you can use a fine cigarette case brush to clean it. 6.

Use an acidic detergent to wash the iron. Once the detergent is diluted, pour it into the iron tank and follow the instructions on the instructions. 7.

After soaking for a few minutes, start the garment steamer for steam jet to completely drain the detergent. Then, rinse the iron with clean water to ensure that the detergent is completely removed. 8.

After cleaning, put the tank back in and install the cigarette case, cover and hose back. 9.Turn on the power supply, preheat the garment steamer and carry out relevant tests to ensure that the cleaning is thorough and effective.

Dear, the following is an extension of related questions, I hope it can help you <>1Regular cleaning of the garment steamer can extend its service life and maintain its performance and effectiveness. 2.

During the cleaning process, a special detergent can be used to clean the ironing machine more thoroughly. 3.If you are not sure how to clean the garment steamer, it is recommended to refer to the product manual or consult a tease professional.

Summary. The cleaning procedure of the garment steamer is very simple. First, make sure the garment steamer has cooled down and disconnected the power supply.

Then, wipe the exterior surface of the garment steamer with a damp cloth to make sure the surface is clean. Next, open the lid of the garment steamer's water tank and pour out the remaining water. Clean the water tank with mild soapy water or detergent and rinse it off with clean water.

Close the water tank lid again. Next, use clean water and a cloth to wipe down the garment steamer's iron and steam nozzle to make sure to remove any stains or residue. Finally, wipe the entire part of the garment steamer with a dry cloth to make sure it is completely dry.

Remember to make sure it is completely dry and plugged in before using the garment steamer. In this way, you can use the garment steamer with confidence.

The cleaning procedure of the garment steamer is very simple. First, make sure the garment steamer has cooled down and disconnected the power supply. Then, wipe the surface of the garment steamer with a damp cloth to ensure that the surface is clean.

Next, open the lid of the garment steamer's water tank and pour out the remaining water. Clean the water tank with mild soapy water or detergent and rinse it off with clean water. Close the water tank lid again.

Next, use water and a cloth to wipe down the garment steamer's iron and steam nozzle to make sure any stains or residue are removed. Finally, wipe the entire part of the garment steamer with a dry cloth to make sure it is completely dry. Remember to make sure it is completely dry and plugged in before using the garment steamer.

In this way, you can use the garment steamer with confidence.

Can you add, I don't quite understand it.

The cleaning procedure of Zhuoli garment steamer is simple, first cool the wheel and power off, wipe the external surface, clean the water tank, wipe the ironing socks Huixin bucket and blue liquid nozzle, and finally wipe dry. Make sure it's dry and ready to use after powering up.