What material is good for garment steamer nozzle, and what material is good for garment steamer nozz

You mean the brush head of the garment steamer, right?

Plastic is easy to age and deform, and it cannot be used if it is deformed. Long-term high temperatures in plastics are not good.

The ceramic's fragile breaks.

Stainless steel is the best choice.

However, at present, stainless steel and some with screws should not be purchased, it will scratch the clothes.

Choosing a rivetless stainless steel brush head is the best choice. At present, only Huaguang's brand has this patented technology.

When buying a garment steamer, we most often pay attention to the appearance, liner, brush head and some additional functions of the garment steamer, such as gear, single and double rods, and whether it is easy to move, but we ignore a very important detail--- steam pipe! In fact, this is also very important, although in essence the size of the steam is not determined by it, but it acts as a goalkeeper, determining the amount of steam output. If the steam duct does not cooperate, even if the amount of steam in the garment steamer is large, the steam can not be sprayed out smoothly, and even a lot of condensate will be formed to wet the clothes, and the desired ironing effect will not be achieved.

What is the difference between garment steamer steam pipes, and what material is better to buy? Today we will also analyze it.

When choosing a steam pipe, you should first look at its material, generally garment steamer uses more plastic hoses, and the inner insulation layer is also made of secondary plastic, once this kind of steam pipe passes through high-calorie steam, it will produce a large amount of toxic gas, which is very damaging to the human body.

It is recommended that when purchasing a garment steamer, the air guide pipe should be yarn wrapped pipe and PVC hose.

The inside of the yarn wrap pipe is generally a thickened PVC steam pipe to ensure the smooth discharge of steam, and does not lose the temperature of the steam, the outside is woven with eight strands of high-density fiber, and it is also equipped with anti-bending springs, multiple protective measures, and can also ensure the smooth flow of steam when bending.

Huaguang - the art of steam.

Essentials 1: When choosing a brush head, be sure to look at the panel material introduction, generally speaking, inferior brush heads are made of secondary plastic, when spraying steam, the brush head will be heated Lingna, resulting in a great smell, and the damage to the human body is also great, 304 brushed stainless steel panel is the best choice, it is not only strong and heat insulation, the stainless steel material eliminates the generation of toxic gases, is very safe.

Essentials 2: Be sure to see if there are screws on the brush head, we all know that the panel with screws is very easy to scratch the fabric of the clothes, and the silk clothes are also easy to draw.

Essentials 3: Look at the design of the brush handle, the brush handle is the part you have to hold all the time when ironing clothes, if it is uncomfortable, it will be very painful, so buy the handle with a better material and ergonomic design, which is durable and comfortable, and is a wise choice.

Essentials 4: Look at whether there is a convection heat dissipation window on the brush handle, the design of the convection heat dissipation ruler rolling spring window is very important, it will keep dissipating heat when ironing clothes, in case of burning your hands, but pay attention to a little Oh, see the position of the heat dissipation window, do not hold your hands on it when ironing, just pay attention to it!

Huaguang's machine generally has a good brush head, fine workmanship, and a weight when you pick it up, LZ can refer to it.

What kind of good is the nozzle of the garment steamer, the solution:

The nozzle of the garment steamer has its own advantages:

The advantages of stainless steel panel are that the panel is not easy to deform, strong and durable, can achieve the best ironing effect, the bottom plate is smooth and wear-resistant, and the ironing is smooth. The ingredients are metallic and bright, with strong texture and high cost.

Teflon panels and ceramic panels have the advantages of high temperature resistance, smooth and non-sticky, and scratch resistant, durable, effectively blocking the corrosion of steam and acid and alkali, and easy to clean.

Garment steamer nozzle generally adopts the industrial and sales leakage plastic (ABS) structure with stainless steel panels, Teflon panels, ceramic panels, plastic panels, etc.

Each one has its own advantages, and it is still up to your own needs and actual experience to decide which one to use and which one is better.

Introduction: garment ironing machine is suitable for any texture of clothes, curtains, blankets and plush toys ironing and disinfection and dusting, because the hanging shed ironing machine is easy to install, simple to use, easy to operate, omitted our usual ironing time, especially suitable for clothing stores, ordinary families, hotels and hotels use. So which garment steamer is good, let me briefly introduce what are the advantages of the garment steamer.

1. Comparative advantage Studies have shown that clothes are often pressed with flat irons, which is easy to damage the fabric of the clothes, resulting in stiffness and aging of the fabric. The garment steamer is ironing in the natural hanging state, which avoids direct damage to the fabric under the dual action of gravity and high-temperature steam (the temperature is about 98 degrees), and can ironing the clothes quickly, conveniently and easily, so that the clothes are as bright as new and maintain the best wearing shape.

2. Environmental protection advantages. The contact part between the garment steamer and the clothes (the outlet part of the nozzle) is far away from the steam source, and the dirt generated by the high temperature of the domestic water used will never be as easy to spray on the clothes as the flat iron or steam ironing brush, but is completely retained in the bottom heater scale storage chamber far away. At the same time, high-temperature steam also has the effect of dust removal, sterilization and disinfection.

3. Convenient advantages.

1) The garment steamer can iron more than 50 pieces of clothes at a time, for modern families, adding water once should be enough to use for more than a week, and the flat iron must be added frequently because the belly is too small.

2) Secondly, the steam-hung ironing machine omits the ironing board in daily use, and the ironing board has the disadvantages of easy dirtiness and troublesome access and placement. (3) The use of garment steamer is fast, convenient, time-saving and labor-saving. Clothes can be ironed as soon as they are hung, there is no need to bend over to iron, the number of irons is large, and the clothes can show the best results.

4. Advantages of garment steamer from overseas when it was introduced to China in the last century'Thousands of yuan has been reduced to a few hundred yuan today, so the garment steamer has also developed from the image tools configured in fashion stores and the luxury goods of high-end families to the ideal helpers necessary for ordinary families.

5. Functional advantages In addition to the basic function of iron, the garment steamer has a good air humidification function in the dry season of autumn and winter or in a dry room, which plays the role of an air warmer.

Since the garment is prone to wrinkles, a garment steamer is required. What are the advantages of garment steamer? PChouse will take you to find out.

1. Fast, convenient, time-saving and labor-saving. Garment steamer is very fast and convenient, and its fast ironing effect can iron a piece of clothing in just a few minutes.

2. Save trouble. The garment steamer can iron more than 50 pieces of clothes with a single water, which is very practical and trouble-free for users who have a large demand for ironing clothes.

3. Practical. Studies have shown that the frequent use of flat irons to press and iron is easy to damage the fabric of clothes, various styles of garment steamers are even better for high-grade dry fabrics, such as hardening and aging, and the use of garment steamers is to iron in a natural hanging state, under the dual action of gravity and high temperature steam (the temperature is about 98 degrees), it can be easily ironed and maintain the best wearing shape.

4、**。An ordinary garment steamer** was equivalent to a flat-plate iron at that time**. Compared with traditional electric irons, it has more advantages in terms of practicality. At the same time, it can also maintain the poor quality of the lifestyle from the details.

Garment steamer, also called hanging iron, vertical iron, is a machine that can hang ironing clothes and fabrics. The garment steamer continuously touches the clothes and fabrics through the scorching hot water steam generated by the internal lack of enlightenment, so as to achieve the purpose of softening the fiber tissue of the clothes and fabrics, and flattens the clothes and fabrics through the actions of "pulling", "pressing" and "spraying", so that the clothes and fabrics are as good as new. Next, PCHOUSE will introduce to you what are the characteristics of the garment steamer.

1.Comparative advantage: Studies have shown that clothes are often pressed with flat irons, which can easily damage the fabric of the clothes, resulting in stiffness and aging of the fabric fibers.

The garment steamer is ironing in the natural hanging state, which avoids direct damage to the fabric under the dual action of the garment's own gravity and high-temperature steam (the temperature is above 100 degrees), and can ironing the clothes quickly, conveniently and easily, so that the clothes are as bright as new and maintain the best wearing shape.

2.Advantages of use: The contact part (nozzle outlet part) between the garment steamer and the clothes (the outlet part of the nozzle) is far away from the steam source, and the dirt generated by the high temperature of the domestic water used will never be as easy to spray on the clothes as the flat iron or steam ironing brush, but is completely retained in the bottom heater scale storage chamber (located at the bottom of the garment steamer heating furnace) far away.

At the same time, high-temperature steam also has the effect of dust removal, sterilization and disinfection.

3.Convenient advantages: When the garment steamer is in use, the speed of steam is often 30 seconds, and there is no need to worry about burning clothes if you don't put it well. When using the flat iron, it is necessary to wait for all the water in the water tank to boil, the speed is slow, and it needs to be placed vertically at the interval of use, which is more cumbersome.

4.Easy to operate advantages: The garment steamer is simple to operate, just plug in the power to turn on the switch, adjust the temperature knob required for the ironed clothes, and will never burn the clothes, which can be described as suitable for all ages, a must-have for fashionable homes.

Flat irons, on the other hand, are known to burn clothes if you are not careful.

In addition, some side car garment steamers have 6 or even 9 levels of adjustment function, which is suitable for silk, cotton, linen, wool and other fabrics, and can easily iron a good life.

5.Capacity advantage. A garment steamer that can iron more than 50 pieces of clothes at a time should be able to last for more than a week for a modern family, but the flat iron must be added frequently because of its "belly" too small.