The water in the refrigerator hole can t leak down, what s going on

There are drain holes under the back panel of the refrigerator compartment, through which the water generated by the refrigerator compartment is discharged and flows into the water collection box above the compressor, where it is evaporated by the heat generated by the compressor.

If the drain hole is blocked, it will be solved by unclogging it with a metal wire.

The hole in the refrigerator is clogged with dirt, and there are dredging devices for refrigerators sold on the Internet, and it is normal after dredging; It is better to find a professional refrigerator after-sales service for you to deal with.

Unplug the refrigerator and plug it in, clean the refrigerator, see the drain hole, and poke it a few times with a tool.

First of all, you must unplug the power supply of the refrigerator, it should be that water will cause conductive electricity, in order to prevent this dangerous situation from happening, you must unplug the power supply. Then, take out all the stored food in the refrigerator and clean the refrigerator so that it is easy to repair. After these basic things are done, you have to do the dredging of the drainage pipe, you can take a tool to poke the drainage pipe a few times, if it is not particularly serious, so that it can be dredged, but the strength should not be too great.

If it is more serious, you can go to the refrigerator storage room, open the back wall of the refrigerator to take a look, find the drainage hole, find the location and use a tool to pass, so that it is more convenient, it is really not good or find a maintenance master to repair it. Once the drainage hole is blocked, it should be dredged immediately, otherwise it will lead to water leakage, power consumption, and may lead to the deterioration of food in the refrigerator.

Ways to prevent the refrigerator drain hole from becoming clogged.

1. The food can not be placed too much, and the food can not be placed close to the inner wall of the refrigerator, too much food in the refrigerator will not only increase the burden of the refrigerator, which is not conducive to the circulation of air conditioning in the refrigerator, but also easily cause food residues to enter the refrigerator drainage hole, resulting in the blockage of the refrigerator drainage hole.

2. The temperature can not be set too low, and the temperature of the refrigerator is set too low, then the water vapor in the refrigerator will condense on the inner wall of the refrigerator to form an ice layer, and the ice layer will enter the refrigerator drainage hole during the melting process, and if it cannot be melted in time, the refrigerator drainage hole will be blocked. If the drain hole of the refrigerator is blocked, the water in the refrigerator will not flow out of the refrigerator in time, which will cause the refrigerator to leak.

The refrigerator refrigerator will often have water flowing outside for a period of time, and finally found that there is a drainage hole in the back of the refrigerator refrigerator, but the sink of the drainage hole is full of water, only to know that the drainage hole is blocked by ice, and now send a correct dredging method, I hope it will be useful to everyone.

Tools Raw materials.

Long wire, pump (or plastic hose at least 2 meters long), plastic bags and sealed bags, plastic basins and rags, Phillips screwdriver.

Method steps.

1 11 Step by Step Reading.

Take my refrigerator as an example.

1.Unplug the refrigerator and turn off the power and heat up a pot of hot water.

2.Clean the refrigerator and you'll see the drain holes.

See 1 image remaining.

3.When you open the back cover of the refrigerator with a Phillips screwdriver, you will see a white plastic box (the inside is dry and without water) and a 1 cm long white drain hole.

See the remaining 3 images.

4.Wrap the compressor with a plastic bag, seal the bag and leave a hole in the corner under the drainage hole, and connect a basin under the hole.

5.Bend the wire at one end (required), poke the drain hole inside the refrigerator, if the blockage is not serious, it will pass in a while, if not, you can determine the height of the blockage, and poke it from the drainage hole below, you can determine the length of the blockage.

See the remaining 2 images.

6.Unscrew the head of the pump, wipe it into the drain hole of the refrigerator to pump in, plug the gap with a rag, otherwise there will be water spurs, wipe the water dry with a rag at any time. If all goes well, the drain will also go through (this step is online to find, but it doesn't work for me).

See 1 image remaining.

7.For me, the pump is to remove all the water from the drain pipe in the drain hole, and its practical long plastic hose or other absorbent tools are better. Wipe the water off with a rag at all times.

8.Cool the hot water to about 50 degrees (just drink a little), pour it into the drain hole, wait about 10 minutes, and poke it with wire.

See 1 image remaining.

9.Repeatedly use the seventh step to absorb water, pour hot water in the eighth step, and poke it with wire, and it will definitely be poked within an hour.

See the remaining 2 images.

10.After passing it, I pour hot water about 3 times (3 cups).

11.Clean up the battlefield, screw the back cover, tidy up the refrigerator, and turn on the electricity. ok！！！

Precautions. Be patient.

The hot water should not be too hot.

<> the small holes of the refrigerator do not leak, you can use a thin soft wire to dredge or find a pump to dredge it. The drain hole under the back of the refrigerator is used to drain the condensate in the refrigerator, if the condensate drain hole is blocked, the condensate generated by the refrigerator will not be effectively discharged, and it will overflow everywhere.

If the drainage hole is blocked, one of the easiest and easiest ways to dredge it is to use a thin soft wire to dredge the drainage hole; You can also use a pump, align the outlet of the pump with the condensate drain and stick it tightly, hit the pump a few times, and dredge it by the pressure of the pump.

When the refrigerator is in use, the simple plastic filter that was originally equipped with the condensate drain should be installed to prevent solids such as vegetable leaves from clogging the drain holes.

This answer is applicable to most brands of refrigerator models such as Siemens, Midea, and Haier.

The reason may be that the drainage hole is blocked, you can use a thin and soft wire to dredge the drainage hole, or use a pump to dredge it, when using a pump, you need to align the air outlet and close to the refrigerator drainage hole, you need to use force when pumping, and rely on the pressure of the air outlet to dredge the drainage hole; The reason may be that items such as vegetable leaves are clogged with the drainage holes, and a plastic filter can be installed on the drainage holes during daily use to avoid clogging.

The reason may be that the refrigerator works for a long time and causes frost on the inner wall to block the drainage hole, which can be solved by regular defrosting with a plastic de-icing shovel, or the refrigerator can be powered off and waiting for the frost blocked in the drainage hole to dissolve, or it can be solved by hot water rinsing, and the distance between the refrigerator and the wall should be kept at least 15cm when placing the refrigerator, so as to ensure the heat dissipation function of the refrigerator, and the setting temperature should not be too low, otherwise there will be ice jams; The reason may be that there is too much water in the water tray and it can be solved by taking out the water tray and cleaning it; The reason may be that there is too much water in the evaporator of the refrigerator, which can be solved by cleaning it in time; The reason may be that the water tray or evaporator is displaced, and it is necessary to place the water tray or evaporator in the correct position to ensure that the water in the refrigerator can accurately flow into the water tray and evaporator; The reason may be that the water tray or evaporator is faulty, and you can ask a professional maintenance person to repair it, and if it cannot be repaired, it needs to be replaced.

The reason may be that the drainage hole is blocked, you can use a thin and soft wire to dredge the drainage hole, or use a pump to dredge it, when using a pump, you need to align the air outlet and close to the refrigerator drainage hole, you need to use force when pumping, and rely on the pressure of the air outlet to dredge the drainage hole; The reason may be that items such as vegetable leaves are clogged with the drainage holes, and a plastic filter can be installed on the drainage holes during daily use to avoid clogging.

The reason may be that the refrigerator works for a long time and causes frost on the inner wall to block the drainage hole, which can be solved by regular defrosting with a plastic de-icing shovel, or the refrigerator can be powered off and waiting for the frost blocked in the drainage hole to dissolve, or it can be solved by hot water rinsing, and the distance between the refrigerator and the wall should be kept at least 15cm when placing the refrigerator, so as to ensure the heat dissipation function of the refrigerator, and the setting temperature should not be too low, otherwise there will be ice jams; The reason may be that there is too much water in the water tray and it can be solved by taking out the water tray and cleaning it; The reason may be that there is too much water in the evaporator of the refrigerator, which can be solved by cleaning it in time; The reason may be that the water tray or evaporator is displaced, and it is necessary to place the water tray or evaporator in the correct position to ensure that the water in the refrigerator can accurately flow into the water tray and evaporator; The reason may be that the water tray or evaporator is faulty, and you can ask a professional maintenance person to repair it, and if it cannot be repaired, it needs to be replaced.

Water leakage from small holes under the refrigerator is a common problem, but if the problem is ignored for a long time, it can lead to more serious consequences, such as deformation of the floor. Here are some ways to deal with a leak in the small hole under your refrigerator.

First, we need to identify the root cause of the water leak. It may be due to a faulty leaking pipe, or a blocked refrigerator drain pipe. If a leaky pipe fails, we need to repair or replace the leaking pipe.

If the refrigerator drain pipe is blocked, we can use some simple methods to clean it, such as cleaning it with a wire, or using compressed air to blow through the drain pipe.

Secondly, we need to pay attention to the environment around the refrigerator. If the surroundings are too humid, it may aggravate the leakage of the refrigerator. So, we need to make sure that the air around us is well circulated, and that the surroundings are kept dry.

If the surrounding environment is too damp and humid, we can use a dehumidifier or open windows to ventilate the humidity to reduce the dampness.

Finally, we need to keep the refrigerator clean and maintained. Cleaning your refrigerator regularly can prevent excessive moisture from accumulating inside your refrigerator, thereby reducing the problem of water leakage in your refrigerator. In addition, it is also necessary to pay attention to adjusting the temperature of the refrigerator when using the refrigerator, if the temperature is too low, the refrigerator is prone to excessive condensation.

In short, dealing with the leakage of small holes under the refrigerator requires us to carefully examine the root cause of the problem and adopt appropriate methods to deal with it. In addition, we also need to pay attention to the surrounding environment and daily maintenance to avoid the problem of refrigerator leakage.

1. First of all, you need to unplug the refrigerator to cut off the power, heat a pot of hot water, clean the refrigerator, and you will see the drainage hole, and then use a Phillips screwdriver to open the back cover of the refrigerator, and you will see a white plastic box on the compressor (there is no water inside) and a white drainage hole 1 cm long in the resistance section. 2. Wrap the compressor with a plastic bag, seal the bag and leave a hole in the corner of the drainage hole, connect a basin under the hole, and poke it from the drainage hole in the refrigerator first. The reasons for this are:

1. If it is found that there are debris in the leakage hole, it will not be able to drain normally if it is not cleaned for a long time, and it is easy to cause the problem of blockage of the drainage hole. 2. Sometimes it is because the temperature of the things placed in the refrigerator is too high, and it is directly put into the refrigerator room without completely cooling, and it will freeze and clog after a long time. 3. In the process of use, especially in summer, the temperature is high, the indoor environment temperature will be high, often open the refrigerator door, hot air enters the refrigerator, melted into water, it is easy to cause the refrigerator drainage hole to freeze and clog.

4. If the refrigerator is used for a long time, too much food stored is likely to lead to the residue of food residues, and it is easy to cause the refrigerator to be clogged without even cleaning.