-
<> flowering period is also very long, can continue to bloom from the end of autumn to April and May in spring, but we must remember in the process of raising longevity flowers, pruning should keep up in time, if you prune unreasonable, the whole plant type is very ugly, flowering performance will be much weaker, if it hurts safflower, from leaving a safflower side front full cut, left and right front and rear branches are the same. If you want to get new flowers for the second time, you should cut them all from the pot after branching, leaving the taproot and hair branches to grow again. Choose two downstairs to call for new students, reduce the burden, eliminate the growth, bask in the sun more, and improve the viewing value.
I like to raise flowers, now is the season of cuttings, it is recommended that you cut the roots of the bush, cut the middle of the flower cuttings, put the cuttings in a cool place after cuttings, do not bask in the sun first, longevity flowers are very good to raise longevity flowers are really good New Year's flowering plants, and the color is more gorgeous, very good-looking, if there are guests to see, very wanted, I think as long as he changes another one out of the good. Kalancho is a succulent plant that is very easy to care for, suitable for planting on a windowsill with appropriate scattered light, and it will bloom vigorously by giving you a lot of light every day, but it is also necessary to avoid excessive exposure or prolonged direct sunlight.
After the flowering period is basically over in April, the residual flowers can be cut off in time, and only the bottom 2 pairs of leaves can be retained. Because there is a certain retraction space after pruning, the flower arrows should not be cut at the bottom, and the flower stem of about 1 cm can promote wound healing and avoid wound infection due to water and rain before the wound is not healed. After this pruning is completed, it will quickly emerge from the top of multiple side buds, these side buds will grow bigger and taller, and when it grows to six or seven leaves, we will remove the top of it, and keep the bottom pair or two pairs of leaves.
Of course, cutting a little earlier or later is a matter of personal preference and willingness. You can decide the pruning time according to the actual situation. In the south, summer is early, so it would be better to prune as early as possible.
-
The new longevity flower leaves a pair of leaves at the seedling stage, and the top new branches are completely cut off, and the two buds of the bottom pair of leaves will germinate. After germination and growth, leave 1-2 pairs of leaves, cut off the top tenderness slightly, and four more branches will germinate on two branches, and after pruning 2-3 times, it will form a plump plant shape of 8-10 branches.
-
You can prune off the excess branches and leaves, and then trim a shape, which is very good-looking, and you can also go to Xiaohongshu to search for bloggers, which is also very helpful to you.
-
I think you can take a tutorial on how to cut flowers online, so that you can cut out very beautiful pots.
-
Longevity flowers should be topped during the growth period to control the size of the plant. When it grows to about 6 cm and has 4-5 leaves, it is ready for the first topping. Topping is also done when it grows to a height of 12 cm, this time to control the height of the plant and promote flowering.
-
The longevity flowers we buy online are usually ugly. Is there any way to make them grow well? It's actually possible.
Today, I will briefly say that many seedlings of longevity flowers on the Internet are cut with branches. After receiving the goods, many leaves fall off, and the seedlings have clear branches that can be pruned and shaped into tree-shaped longevity Xinbi flowers. A branch is lush and beautiful, like a small old stump.
1.Pruning and topping the newly purchased longevity flowers can make the top flower buds bloom. But try not to let this seedling bloom, so that the nutrients can be conserved and the branches can grow.
When the newly cut seedlings grow to about 10 cm, they should be pruned and topped, and the top buds will be pinched off, and the side buds will grow from the cut. When the side buds grow to 5 6 cm, they can be pruned and topped again, leaving two or three pairs of leaves. Then the side buds can grow in this way, and through constant pruning and topping, their heads will continue to increase, so as to create a small old pile with clear branches at the bottom and lush at the top, and the new branches will all bloom, and it will be very beautiful when the time comes.
2.Fertilize seedlings like this with new cuttings because the soil is relatively fresh and do not need to be repotted first. Because it is taboo to use large pots to raise seedlings in the maintenance of longevity flowers, it can be allowed to grow in this small pot.
Sprinkle some compound fertilizer with complete nitrogen, phosphorus and potassium elements, and put it in a place where it can be exposed to light for about 4 6 hours. 3.The temperature is then controlled to grow at between 15 and 25 degrees.
Spring and autumn are the peak periods for its growth. After a year of growth, you can get a tree-shaped longevity flower with beautiful shape and many flowers.
-
At first, you can cut all the branches of the longevity flower, cut off the withered flower buds and the second pair of leaves under the flower buds, and cut off the branches on the longevity flower plant that are too long, have poor growth or suffer from pests and diseases.
-
Choose the pruning season: If the longevity flowers have not yet bloomed, you can choose to prune in spring and autumn, if they have bloomed, you can choose to prune after the flowers have withered, but whether they bloom or not, prune the branches before September, so that the longevity flowers can store nutrients for flowering.
-
The old leaves of the longevity flower should be pruned off, because the old leaves will compete for the nutrients of the new leaves.
-
1.The topping of the longevity flower is to pinch off the seedlings at the top of the longevity flower, control the growth and growth height of the longevity flower, and force it to germinate the side branches and side buds, so that the plant will not appear monotonous, and in the subsequent flowering period, there will also be flower bud points on the side branches, which will be vigorous and beautiful. 2.
In the growth process of longevity flowers, it is inevitable that there will be relatively weak branches, as well as some dead branches and rotten leaves, diseased branches and weak leaves, old leaves, long branches and leaves, etc., which need to be removed in time, otherwise the whole plant of longevity flowers will have a large amount of unnecessary nutrient loss, affecting its health.
-
When pruning, you should cut off the long shoots and keep the trunk so that the leaves can better absorb the sun.
-
Kalancho is a common flower in home life. To prune longevity flowers, cut off excess side branches. Ensure ventilation between the leaves. so as not to damage the leaves.
-
It is best not to change the pot of the longevity flowers that you have just bought. If it must be replaced, it should be replaced after it has adapted to the new environment. Temperature:
It is recommended to keep it at around 20. Lighting: It is recommended to provide scattered light, and shade is required when the light is strong.
Watering: Watering must be in moderation, and do not allow water to accumulate in the soil. Wait for it to acclimatize before resuming normal watering.
-
If you have just bought a longevity flower, you should first check whether the potting soil is hardened, or hard, if this is the case, then you should replace it with new potting soil. The requirements for the soil are not very high, and generally as long as they are breathable, loose and well drained, they can be used.
-
Today, I would like to introduce you to the longevity flower. When we raise longevity flowers, many people will consult about this longevity flower. Can you cut off the big leaves underneath it?
In fact, when we buy this longevity flower, the leaves of this longevity flower do not grow naturally, they are all artificially controlled. However, this kind of leaf has a very short lifespan, so Hui Panzen must be cut when it is time to cut it. But the period when we cut this leaf is also very important, because if you cut it too early, it will affect the photosynthesis of the whole plant, and then affect its flowering, so when is the best time for us to cut it?
It's best to cut off all the remaining flowers of this flower after the flowers have withered, and then the leaves will grow some new shoots and branches. When it starts to grow new shoots and branches, we can cut off the old leaves at the bottom. Why prune at this time?
Because keeping this large leaf at this time will not only consume too many nutrients and affect the growth of this new shoot and new branch, but also the leaf is too large and will block some light. Then it will affect the photosynthesis of the plant, and it will also lead to the poor ventilation and ventilation of the plant as a whole, which will affect the growth of the whole plant. Therefore, it is most appropriate to cut off the large leaves at the bottom of the longevity flower at this time of enlightenment.
-
First, the pruning method of longevity flowers.
1. The second pair of leaves under the flower branch and the flower branch are cut off together, and new shoots can grow and bloom for the second time after a while.
2. Overhaul after flower failure every year, prune before July only need to leave about 3 cm of branches, and the others can be cut off (you can leave no leaves at all).
3. When pruning, it is necessary to cooperate with repotting and fertilization, and the pruned branches can be cuttings. Soon the longevity will produce a lot of shoots, and then keep the plant within 10-15 cm, and the excess can be removed.
4. In the early stage of vigorous growth of longevity flowers, it is necessary to pay attention to topping, promote branching, and make potted flowers grow more plump, which will help the flowers to bloom more densely in the future.
Second, the principle of repairing the base scissors:
Longevity flower pruning is based on the principle of cutting inside and not outside, cutting on and not cutting, and cutting weak and not strong. Leave 3 to 4 slave branches on the main branch, leave 3 to 4 nodes on each slave branch, and cut off the branches and leaves that are round and careful, and at the same time cut off the old and weak yellow leaves, as well as overlapping branches, and some impermeable leaves should be cut off.
Put it on that, and water it a little after a while.
If you have a pot of flowers at home, but you don't know what kind of flower it is, you can use the picture recognition function to identify the flower, you can open it, and then click the camera next to the search bar, and then take a picture of the pot, and then it will automatically identify the variety of the potted flower.
I feel like a camellia, it's really like it.
Of course you can't feed it! Because those straw and foam are packaging materials in the transportation of flowers, there is no water and nutrients can be used, due to the high humidity in the flower market, in the case of frequent watering of the stall owner, the symptoms of flower water shortage will not be obvious in a short period of time, but once you buy home, the humidity at home can not be compared with the flower market, the evaporation of water is accelerated, and the root system of the plant can not absorb water, and the uncomfortable symptoms of the aboveground part will soon appear. >>>More
You can use some waste in life to make flower fertilizer to supplement nutrients for various flowers, and you can still raise all the flowers very vigorously. Here's how to make your own flower manure at home: >>>More