How to deal with waste oil and what should be done with waste oil

Waste oil treatment methods are:1. These oils and fats can be burned intensively for power generation and turning waste into treasure. These waste greases can be used to make soap, which has a strong decontamination ability.

2. It can be concentrated and used to make animal feed. Through scientific decomposition and refining, industrial lubricants can be made for lubricating parts. Through refining, it can be made into fuel for industrial use, saving energy and turning waste into treasure.

3. Pavement oiling is to spray waste engine oil on the road with large dust, and use its large adhesive characteristics to stick the dust on the road, which effectively plays the role of dust prevention and sand fixation.

The treatment methods of waste oil include incineration, discarding, pavement oiling, and self-use.

1. Incineration

One of the most common ways to use engine oil is incineration, and a lot of construction waste will be generated during the construction process.

In order to facilitate the removal of this garbage, it is often incinerated together with waste engine oil.

We sometimes see burning garbage on the roadside accompanied by billowing black smoke, which is very polluting to the environment, and the environmental protection department will also impose corresponding fines, so this method of waste engine oil disposal is very undesirable.

2. Discard disposal

Throwing away used engine oil at will is also a common method used by people. The waste engine oil replaced by the excavator is generally not taken seriously, and many times it is either dumped into the trash can or directly poured on the ground, or even in ditches and rivers.

This treatment method has caused serious pollution to the land and rivers, and will endanger human health, so it is also a very wrong way to deal with it.

3. Oiling of road surface

Another way to deal with it is to spray the waste engine oil on the dusty road, and use its large adhesive characteristics to stick the dust on the road, which effectively plays the role of dust prevention and sand fixation.

However, there is also a big pollution hazard in this way, once it rains, these waste engine oil can easily flow into the ditch with the rainwater, seeping into the soil and polluting the water quality. Although this kind of waste engine oil disposal method is better than the above two, it is not a very reasonable treatment method.

4. **For personal use

The correct way to dispose of waste engine oil is to reuse it. We can save the used engine oil first, and then give it to the refining plant on a regular basis, which is a very reasonable treatment method in terms of environmental protection, resource utilization and economic benefits.

1. After discarding waste oil and replacing it, it has always been in the status of "waste" because of its abnormally low economic value. People often pay little attention to small amounts of waste oil, and dump them into rivers, open fields or garbage bins. Such an approach would cause significant pollution to the environment and waste resources.

2. Incineration is also a common treatment method to use waste oil as fuel. Many construction sites will mix waste engine oil with other construction waste that needs to be incinerated to burn and destroy these buildings, these waste engine oil can produce a good combustion effect, and this kind of treatment is also very harmful to the environment.

Waste oil**. Oil-using units should establish a waste oil mechanism and carry out waste oil in different categories. For the general use of the unit, it is not recommended to reprocess by yourself, and directly hand over the waste oil to the reprocessing unit.

Recycling of used engine oil.

The general engine oil is mineral engine oil, which is a class of products obtained by distillation of the heavy fraction of petroleum under vacuum pressure. The so-called waste engine oil refers to the impurities such as water, dust, other miscellaneous oils and metal powder produced by the wear of parts in the use of engine oil;

The second is the gradual deterioration of the engine oil, which produces organic acids, gums and asphalt-like substances. The regeneration of waste engine oil is to remove impurities in the engine oil by means of sedimentation, distillation, pickling, alkali washing, filtration, etc.